A submerged internal circulating membrane coagulation reactor （MCR） was used to treat surface water to produce drinking water. Polyaluminum chloride （PAC1） was used as coagulant, and a hydrophilic polyvinylidene f...A submerged internal circulating membrane coagulation reactor （MCR） was used to treat surface water to produce drinking water. Polyaluminum chloride （PAC1） was used as coagulant, and a hydrophilic polyvinylidene fluoride （PVDF） submerged hollow fiber microfiltration membrane was employed. The influences of trans-membrane pressure （TMP）, zeta potential （ZP） of the suspended particles in raw water, and KMnO4 dosing on water flux and the removal of turbidity and organic matter were systematically investigated. Continuous bench-scale experiments showed that the permeate quality of the MCR satisfied the requirement for a centralized water supply, according to the Standards for Drinking Water Quality of China （GB B749-2006）, as evaluated by turbidity （〈1 NTU） and total organic carbon （TOC） （〈5 mE/L） measurements. Besides water flux, the removal of turbidity, TOC and dissolved organic carbon （DOC） in the raw water also increased with increasing TMP in the range of 0.01-0.05 MPa. High ZP induced by PAC1, such as 5-9 mY, led to an increase in the number of fine and total particles in the MCR, and consequently caused serious membrane fouling and high permeate turbidity. However, the removal of TOC and DOC increased with increasing ZP. A slightly positive ZP, such as 1-2 mV, corresponding to charge neutralization coagulation, was favorable for membrane fouling control. Moreover, dosing with KMnO4 could further improve the removal of turbidity and DOC, thereby mitigating membrane fouling. The results are helpful for the application of the MCR in producing drinking water and also beneficial to the research and application of other coagulation and membrane separation hybrid processes.展开更多
基金supported by the Special Funds for Technological Development of Research Institutes from the Ministry of Science and Technology of China(Nos.2012EG111122,2013EG111129,2014EG111126)the Program for Overseas Talents from Beijing Academy of Science and Technology(No.OTP-2013-015)the Six Talent Peaks Program from Jiangsu Province(No.JNHB-012)
文摘A submerged internal circulating membrane coagulation reactor （MCR） was used to treat surface water to produce drinking water. Polyaluminum chloride （PAC1） was used as coagulant, and a hydrophilic polyvinylidene fluoride （PVDF） submerged hollow fiber microfiltration membrane was employed. The influences of trans-membrane pressure （TMP）, zeta potential （ZP） of the suspended particles in raw water, and KMnO4 dosing on water flux and the removal of turbidity and organic matter were systematically investigated. Continuous bench-scale experiments showed that the permeate quality of the MCR satisfied the requirement for a centralized water supply, according to the Standards for Drinking Water Quality of China （GB B749-2006）, as evaluated by turbidity （〈1 NTU） and total organic carbon （TOC） （〈5 mE/L） measurements. Besides water flux, the removal of turbidity, TOC and dissolved organic carbon （DOC） in the raw water also increased with increasing TMP in the range of 0.01-0.05 MPa. High ZP induced by PAC1, such as 5-9 mY, led to an increase in the number of fine and total particles in the MCR, and consequently caused serious membrane fouling and high permeate turbidity. However, the removal of TOC and DOC increased with increasing ZP. A slightly positive ZP, such as 1-2 mV, corresponding to charge neutralization coagulation, was favorable for membrane fouling control. Moreover, dosing with KMnO4 could further improve the removal of turbidity and DOC, thereby mitigating membrane fouling. The results are helpful for the application of the MCR in producing drinking water and also beneficial to the research and application of other coagulation and membrane separation hybrid processes.
