Health Care Expenditure Inequality Associated With Pollution in China

This research builds an index to describe the inequality in health care expenditure related to pollution,and the measurement with Chinese provincial data set suggests that health care expenditure inequality related to pollution is obvious negative,which confirms that residents located in high-polluted areas cannot get the better health care resources.Meanwhile,the absolute value of health care expenditure inequality related to pollution is even larger than that related to income,which suggests the inequality related to pollution cannot be ignored.

Microstructure refinement-homogenization and flexural strength improvement of Al_(2)O_(3) ceramics fabricated by DLP-stereolithography integrated with chemical precipitation coating process

In this study,the chemical precipitation coating(CP)process was creatively integrated with DLP-stereolithography based 3D printing for refining and homogenizing the microstructure of 3D printed Al_(2)O_(3) ceramic.Based on this novel approach,Al_(2)O_(3)powder was coated with a homogeneous layer of amorphous Y2O3,with the coated AI2O3 powder found to make the microstructure of 3D printed Al_(2)O_(3) ceramic more uniform and refined,as compared with the conventional mechanical mixing(MM)of Al_(2)O_(3) and Y_(2)O_(3) powders.The grain size of Al_(2)O_(3) in Sample CP is 64.44%and 51.43%lower than those in the monolithic Al_(2)O_(3) ceramic and Sample MM,respectively.Sample CP has the highest flexural strength of 455.37±32.17 MPa,which is 14.85%and 25.45%higher than those of Samples MM and AL,respectively;also Sample CP has the highest Weibull modulus of 16.88 among the three kinds of samples.Moreover,the fine grained Sample CP has a close thermal conductivity to the coarse grained Sample MM because of the changes in morphology of Y_(3)Al_(5)O_(12) phase from semi-connected(Sample MM)to isolated(Sample CP).Finally,specially designed fin-type Al_(2)O_(3) ceramic heat sinks were successfully fabricated via the novel integrated process,which has been proven to be an effective method for fabricating complex-shaped Al_(2)O_(3) ceramic components with enhanced flexural strength and reliability.

Pollen dispersal in traditional processing of buckwheat and its application in agricultural archaeology

Pollen, as an important index of the paleoenvironment and ancient human agricultural activities, is also one of the significant indicators for research on buckwheat agriculture. In order to test buckwheat pollen dispersal during each crop processing stage, we applied traditional processing simulation experiments of buckwheat crops in a modern village, to collect aerial pollen and perform statistical analysis. The result has shown that the distribution of buckwheat pollen in residential areas is closely related to human processing behaviour. Among all the processing procedures, pollen release rate is highest in the threshing and the sieving stages. The redistribution and burial of pollen during crop processing is an important reason for the prominent increase of crop pollen concentration in the cultural layer. Not only can it indicate the cultivation and processing behaviour of humans but also provide a basis for identifying the crop processing remains in archaeological sites and assessing the intensity of agricultural activities.