Extraction of castor oil from castor seeds was investigated using different green solvents which include d-limonene, p-cymene, α-pinene, ethanol, and furfural at the temperature range of (323 - 413) K. The Soxhlet ex...Extraction of castor oil from castor seeds was investigated using different green solvents which include d-limonene, p-cymene, α-pinene, ethanol, and furfural at the temperature range of (323 - 413) K. The Soxhlet extraction method was employed to investigate the effect of temperature at atmospheric pressure. The focus of the study was to investigate a potential green solvent that can produce the high yields compared to the traditional solvent (hexane). The results show that at the average time of 3 hours and 30 minutes, the castor oil yield for green solvents were ranked as furfural (47.13%) > ethanol (45.37%) > p-cymene (39.15%) > d-limonene (39.13%) > α-pinene (38.11%). These castor oil yields were obtained at optimum temperatures for each green solvent. The castor oil yields were compared to the yield of hexane (31.36%) at same average time. The green solvents were recovered by using simple distillation, except furfural which was difficult to be recovered.展开更多
In this study, a homogeneous alkaline catalyst was used in the production of biodiesel from raw and refined castor oil feedstock. The effect of potassium hydroxide (KOH) as a catalyst between the two feedstocks, raw a...In this study, a homogeneous alkaline catalyst was used in the production of biodiesel from raw and refined castor oil feedstock. The effect of potassium hydroxide (KOH) as a catalyst between the two feedstocks, raw and refined castor oil was compared. The transesterification technique was utilized in this study, aiming to investigate the effect of different parameters, which include the reaction temperature, methanol-to-oil mole ratio, and catalyst concentration at a constant period of 90 minutes. The result revealed the performance of the KOH catalyst on raw castor oil yielded 98.49% FAME, which was higher than the refined castor oil which yielded 97.9% FAME. The optimal conditions obtained from refined castor oil were applied to raw castor oil because of the same properties. The fuel quality of castor oil and produced biodiesel were tested for physicochemical properties.展开更多
文摘Extraction of castor oil from castor seeds was investigated using different green solvents which include d-limonene, p-cymene, α-pinene, ethanol, and furfural at the temperature range of (323 - 413) K. The Soxhlet extraction method was employed to investigate the effect of temperature at atmospheric pressure. The focus of the study was to investigate a potential green solvent that can produce the high yields compared to the traditional solvent (hexane). The results show that at the average time of 3 hours and 30 minutes, the castor oil yield for green solvents were ranked as furfural (47.13%) > ethanol (45.37%) > p-cymene (39.15%) > d-limonene (39.13%) > α-pinene (38.11%). These castor oil yields were obtained at optimum temperatures for each green solvent. The castor oil yields were compared to the yield of hexane (31.36%) at same average time. The green solvents were recovered by using simple distillation, except furfural which was difficult to be recovered.
文摘In this study, a homogeneous alkaline catalyst was used in the production of biodiesel from raw and refined castor oil feedstock. The effect of potassium hydroxide (KOH) as a catalyst between the two feedstocks, raw and refined castor oil was compared. The transesterification technique was utilized in this study, aiming to investigate the effect of different parameters, which include the reaction temperature, methanol-to-oil mole ratio, and catalyst concentration at a constant period of 90 minutes. The result revealed the performance of the KOH catalyst on raw castor oil yielded 98.49% FAME, which was higher than the refined castor oil which yielded 97.9% FAME. The optimal conditions obtained from refined castor oil were applied to raw castor oil because of the same properties. The fuel quality of castor oil and produced biodiesel were tested for physicochemical properties.