A quasi-distributed Fabry-Perot fiber optic temperature sensor array using optical time domain reflectometry （OTDR） technique is presented. The F-P sensor is made by two face to face single-mode optical fibers and t...A quasi-distributed Fabry-Perot fiber optic temperature sensor array using optical time domain reflectometry （OTDR） technique is presented. The F-P sensor is made by two face to face single-mode optical fibers and their surfaces have been polished. Due to the low reflectivity of the fiber surfaces, the sensor is described as low Fresnel Fabry-Perot interferometer （FPI）. The working principle is analyzed using twobeam optical interference approximation. To measure the temperature, a certain temperature sensitive material is filled in the cavity. The slight changes of the reflective intensity which is induced by the refractive index of the material was caught by OTDR. The length of the cavity is obtained by monitoring the interference spectrum which is used for the setting of the sensor static characteristics within the quasi-linear range. Based on our design, a three point sensor array are fabricated and characterized. The experimental results show that with the temperature increasing from -30℃ to 80℃, the reflectivity increase in a good linear manner. The sensitivity was approximate 0.074 dB℃. For the low transmission loss, more sensors can be integrated.展开更多
基金funded by the National Natural Science Foundation of China under Grant No. 60677031 and 60577043the Specialized Research Fund for the Doctoral Program of Higher Education of China under Grant No. 20060280001+1 种基金Shanghai Education Commission under Grant No. 06AZ032, Chenguang Program under Grant No. 2007CG54Science and Technology Commission of Shanghai Municipality (STCSM) under Grant No. 07DZ22024 and 075307017
文摘A quasi-distributed Fabry-Perot fiber optic temperature sensor array using optical time domain reflectometry （OTDR） technique is presented. The F-P sensor is made by two face to face single-mode optical fibers and their surfaces have been polished. Due to the low reflectivity of the fiber surfaces, the sensor is described as low Fresnel Fabry-Perot interferometer （FPI）. The working principle is analyzed using twobeam optical interference approximation. To measure the temperature, a certain temperature sensitive material is filled in the cavity. The slight changes of the reflective intensity which is induced by the refractive index of the material was caught by OTDR. The length of the cavity is obtained by monitoring the interference spectrum which is used for the setting of the sensor static characteristics within the quasi-linear range. Based on our design, a three point sensor array are fabricated and characterized. The experimental results show that with the temperature increasing from -30℃ to 80℃, the reflectivity increase in a good linear manner. The sensitivity was approximate 0.074 dB℃. For the low transmission loss, more sensors can be integrated.
