In order to study the influence of crystal structure change due to implantation dose on the hardness and wear performance of 300M high-strength steel,samples were surface modified by Cr implantation with dosages of 5....In order to study the influence of crystal structure change due to implantation dose on the hardness and wear performance of 300M high-strength steel,samples were surface modified by Cr implantation with dosages of 5.0 × 10^16,1.5 × 10^17 and 3.0 × 10^17 ions/cm^2.X-ray diffraction method,which was already applied in studies on the microstructure of deformed and heat-treated materials,was used to study the crystal structure of the implanted steel,and the results were corrected with the hardness and wear performance.The solid solution strengthening effect and microstructure vary with increase in implantation dose.Owing to strong solid solution hardening of Cr,small average crystallite size and high dislocation density,the hardness and wear resistance of implanted steel with dose of 5.0 × 10^16 ions/cm^2 were found to be the highest compared with other samples.Moreover,although the crystal lite size of the implanted sample with dose of 3 × 10^17 ions/cm^2 was similar to that of substrate and the dislocation density was lower than that of the substrate,its higher hardness and lower specific wear rate were due to the solid solution hardening and perhaps Cr clusters reinforcement.展开更多
基金This project was supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions,Chinathe Jiangsu Province Graduate Cultivation Innovative Project(Grant No.KYLX16_0347)+4 种基金Natural Science Foundation for Excellent Young Scientists of Jiangsu Province,China(Grant No.BK20180068)China Postdoctoral Science Foundation funded project,China(Grant No.2018M630555)the Fundamental Research Funds for the Central Universities,China(Grant No.NS2018039)the China Scholarship CouncilChina(Grant No.201706830071,awarded to Xiao-hu Chen for 1 year of study at the Department of Mechanical and Aerospace Engineering,Carleton University).The raw/processed data required to reproduce these findings cannot be shared at this time due to contractual issues.
文摘In order to study the influence of crystal structure change due to implantation dose on the hardness and wear performance of 300M high-strength steel,samples were surface modified by Cr implantation with dosages of 5.0 × 10^16,1.5 × 10^17 and 3.0 × 10^17 ions/cm^2.X-ray diffraction method,which was already applied in studies on the microstructure of deformed and heat-treated materials,was used to study the crystal structure of the implanted steel,and the results were corrected with the hardness and wear performance.The solid solution strengthening effect and microstructure vary with increase in implantation dose.Owing to strong solid solution hardening of Cr,small average crystallite size and high dislocation density,the hardness and wear resistance of implanted steel with dose of 5.0 × 10^16 ions/cm^2 were found to be the highest compared with other samples.Moreover,although the crystal lite size of the implanted sample with dose of 3 × 10^17 ions/cm^2 was similar to that of substrate and the dislocation density was lower than that of the substrate,its higher hardness and lower specific wear rate were due to the solid solution hardening and perhaps Cr clusters reinforcement.
