Hydroxyapatite （HA） nano-powder was synthesized via wet chemical technique in a used precipitation reaction, in which Ca（OH）2 and H3PO4 were used as precursors. Deionised water was used as a diluting media for the...Hydroxyapatite （HA） nano-powder was synthesized via wet chemical technique in a used precipitation reaction, in which Ca（OH）2 and H3PO4 were used as precursors. Deionised water was used as a diluting media for the reaction and ammonia was used to adjust the pH. The synthetic HA nano-powder has some medical applications such as a coating material in orthopaedic implants and in dental. HA powder has been studied at different temperatures from 100 to 800 ℃ to achieve the stoichiometric Ca/P ratio 1.667. The optimum temperature was found to be 600 ℃. Above this temperature, the HA powder decomposed to CaO. The crystallite size of HA powder was found to be in the range of 8.47-24.47 nm. The crystallographic properties were evaluated by X-ray diffraction, Fourier transform infrared spectroscopy, energy dispersive X- ray spectroscopy and scanning electron microscopy. The results show that, high purity of nano-hydroxyapatite powders could be obtained at low temperatures, and the crystallinity, crystallite size and Ca/P ratio of the resulting nanoparticles were found to be dependent on the calcination temperature. When Ca/P ratio exceeded 1.75, formation of CaO phase was observed.展开更多
文摘Hydroxyapatite （HA） nano-powder was synthesized via wet chemical technique in a used precipitation reaction, in which Ca（OH）2 and H3PO4 were used as precursors. Deionised water was used as a diluting media for the reaction and ammonia was used to adjust the pH. The synthetic HA nano-powder has some medical applications such as a coating material in orthopaedic implants and in dental. HA powder has been studied at different temperatures from 100 to 800 ℃ to achieve the stoichiometric Ca/P ratio 1.667. The optimum temperature was found to be 600 ℃. Above this temperature, the HA powder decomposed to CaO. The crystallite size of HA powder was found to be in the range of 8.47-24.47 nm. The crystallographic properties were evaluated by X-ray diffraction, Fourier transform infrared spectroscopy, energy dispersive X- ray spectroscopy and scanning electron microscopy. The results show that, high purity of nano-hydroxyapatite powders could be obtained at low temperatures, and the crystallinity, crystallite size and Ca/P ratio of the resulting nanoparticles were found to be dependent on the calcination temperature. When Ca/P ratio exceeded 1.75, formation of CaO phase was observed.
