Application of the monitoring and early warning system for internal solitary waves:Take the second natural gas hydrates production test in the South China Sea as an example

Internal solitary waves(ISWs) contain great energy and have the characteristics of emergency and concealment. To avoid their damage to offshore engineering, a new generation of monitoring and early warning system for ISWs was developed using technologies of double buoys monitoring, intelligent realtime data transmission, and automatic software identification. The system was applied to the second natural gas hydrates(NGHs) production test in the Shenhu Area, South China Sea(SCS) and successfully provided the early warning of ISWs for 173 days(from October 2019 to April 2020). The abrupt changes in the thrust force of the drilling platform under the attack of ISWs were consistent with the early warning information, proving the reliability of this system. A total of 93 ISWs were detected around the drilling platform. Most of them occurred during the spring tides in October–December 2019 and April 2020, while few of them occurred in winter. As suggested by the theoretical model, the full-depth structure of ISWs was a typical current profile of mode-1, and the velocities of wave-induced currents can reach 80 cm/s and30 cm/s, respectively, in the upper ocean and near the seabed. The ISWs may be primarily generated from the interactions between the topography and semidiurnal tides in the Luzon Strait, and then propagate westward to the drilling platform. This study could serve as an important reference for the early warning of ISWs for offshore engineering construction in the future.

The first offshore natural gas hydrate production test in South China Sea

Natural gas hydrates (NGH)is one of key future clean energy resources.Its industrialized development will help remit the huge demand of global natural gas,relieve the increasing pressure of the environment, and play a vital role in the green sustainable growth of human societies.Based on nearly two decades' studying on the reservoir characteristics in the South China Sea (SCS)and the knowledge of reservoir system,the China Geological Survey (CGS)conducted the first production test on an optimal target selected in Shenhu area SCS in 2017.Guided by the "three-phase control"exploitation theory which focused on formation stabilization,technologies such as formation fluid extraction,well drilling and completing, reservoir stimulating,sand controlling,environmental monitoring,monitoring and preventing of secondary formation of hydrates were applied.The test lasted for 60 days from May 10^th when starting to pump, drop pressure and ignite to well killing on July 9^th,with gas production of 3.09×10^5 m^3 in total,which is a world record with the longest continuous duration of gas production and maximal gas yield.This successful test brings a significant breakthrough on safety control of NGH production.

Preliminary results of environmental monitoring of the natural gas hydrate production test in the South China Sea

Natural gas hydrate (NGH)is considered as one of the new clean energy sources of the 21st century with the highest potential.The environmental issues of NGH production have attracted the close attention of scientists in various countries.From May 10 to July 9,2017,the first offshore NGH production test in the South China Sea (SCS)was conducted by the China Geological Survey.In addition,environmental security has also been effectively guaranteed via a comprehensive environmental monitoring system built during the NGH production test.The monitoring system considered sea-surface atmosphere methane and carbon dioxide concentrations,dissolved methane in the sea water column,and the seafloor physical oceanography and marine chemistry environment.The whole process was monitored via multiple means, in multiple layers,in all domains,and in real time.After the production test,an environmental investigation was promptly conducted to evaluate the environmental impact of the NGH production test. The monitoring results showed that the dissolved methane concentration in seawater and the near-seabed environment characteristics after the test were consistent with the background values,indicating that the NGH production test did not cause environmental problems such as methane leakage.

The second natural gas hydrate production test in the South China Sea

Clayey silt reservoirs bearing natural gas hydrates(NGH)are considered to be the hydrate-bearing reservoirs that boast the highest reserves but tend to be the most difficult to exploit.They are proved to be exploitable by the first NGH production test conducted in the South China Sea in 2017.Based on the understanding of the first production test,the China Geological Survey determined the optimal target NGH reservoirs for production test and conducted a detailed assessment,numerical and experimental simulation,and onshore testing of the reservoirs.After that,it conducted the second offshore NGH production test in 1225 m deep Shenhu Area,South China Sea(also referred to as the second production test)from October 2019 to April 2020.During the second production test,a series of technical challenges of drilling horizontal wells in shallow soft strata in deep sea were met,including wellhead stability,directional drilling of a horizontal well,reservoir stimulation and sand control,and accurate depressurization.As a result,30 days of continuous gas production was achieved,with a cumulative gas production of 86.14×104 m3.Thus,the average daily gas production is 2.87×10^4 m^3,which is 5.57 times as much as that obtained in the first production test.Therefore,both the cumulative gas production and the daily gas production were highly improved compared to the first production test.As indicated by the monitoring results of the second production test,there was no anomaly in methane content in the seafloor,seawater,and atmosphere throughout the whole production test.This successful production test further indicates that safe and effective NGH exploitation is feasible in clayey silt NGH reservoirs.The industrialization of hydrates consists of five stages in general,namely theoretical research and simulation experiments,exploratory production test,experimental production test,productive production test,and commercial production.The second production test serves as an important step from the exploratory production test to experimental production test.

Multi-factor sensitivity analysis on the stability of submarine hydrate-bearing slope

There are many factors affecting the instability of the submarine hydrate-bearing slope (SHBS),and the interaction with hydrate is very complicated.In this paper,the mechanical mechanism of the static liquefaction and instability of submarine slope caused by the dissociation of natural gas hydrate (NGH) resulting in the rapid increase of pore pressure of gas hydrate-bearing sediments (GHBS) and the decrease of effective stress are analyzed based on the time series and type of SHBS.Then,taking the typical submarine slope in the northern South China Sea as an example,four important factors affecting the stability of SHBS are selected,such as the degree of hydrate dissociation,the depth of hydrate burial,the thickness of hydrate,and the depth of seawater.According to the principle of orthogonal method,25 orthogonal test schemes with 4 factors and 5 levels are designed and the safety factors of submarine slope stability of each scheme are calculated by using the strength reduction finite element method.By means of the orthogonal design range analysis and the variance analysis,sensitivity of influential factors on stability of SHBS are obtained.The results show that the degree of hydrate dissociation is the most sensitive,followed by hydrate burial depth,the thickness of hydrate and the depth of seawater.Finally,the concept of gas hydrate critical burial depth is put forward according to the influence law of gas hydrate burial depth,and the numerical simulation for specific submarine slope is carried out,which indicates the existence of critical burial depth.

Stability analysis of submarine slopes in the area of the test production of gas hydrate in the South China Sea

In this paper, the mechanical properties of gas hydrate-bearing sediments (GHBS) were summarized and the instability mechanism of submarine hydrate-bearing slope (SHBS) was analyzed under the background of the test production of gas hydrate in the northern part of the South China Sea. The strength reduction finite element method (SRFEM) was introduced to the stability analysis of submarine slopes for the safety of the test production. Two schemes were designed to determine the physical and mechanical parameters of four target wells. Through the division of the hydrate dissociation region and the design of four working conditions, the range and degree of hydrate dissociation at different stages during the test production were simulated. Based on the software ABAQUS, 37 FEM models of SHBS were set up to analyze and assess the stability of the submarine slopes in the area of the test production. Necessary information such as safety factors, deformation, and displacement were obtained at different stages and under different working conditions. According to the calculation results, the submarine slope area is stable before the test production, and the safety factors almost remains the same during and after the test production. All these indicate that the test production has no obvious influence on the area of the test production and the submarine slopes in the area are stable during and after the test production.

Distributed optical fiber acoustic sensor for in situ monitoring of marine natural gas hydrates production for the first time in the Shenhu Area,China

The distributed acoustic sensor(DAS)uses a single optical cable as the sensing unit,which can capture the acoustic and vibration signals along the optical cable in real-time.So it is suitable for monitoring downhole production activities in the process of oil and gas development.The authors applied the DAS system in a gas production well in the South China Sea for in situ monitoring of the whole wellbore for the first time and obtained the distributed acoustic signals along the whole wellbore.These signals can clearly distinguish the vertical section,curve section,and horizontal production section.The collected acoustic signal with the frequency of approximately 50 Hz caused by the electric submersible pump exhibit a signal-to-noise ratio higher than 27 dB.By analyzing the acoustic signals in the production section,it can be located the layers with high gas production rates.Once an accurate physical model is built in the future,the gas production profile will be obtained.In addition,the DAS system can track the trajectory of downhole tools in the wellbore to guide the operation.Through the velocity analysis of the typical signals,the type of fluids in the wellbore can be distinguished.The successful application of the system provides a promising whole wellbore acoustic monitoring tool for the production of marine gas hydrate,with a good application prospect.

Stability analysis of seabed strata and casing structure during the natural gas hydrates exploitation by depressurization in horizontal wells in South China Sea

Natural gas hydrates(NGHs)are a new type of clean energy with great development potential.However,it is urgent to achieve safe and economical NGHs development and utilization.This study established a physical model of the study area using the FLAC^(3D) software based on the key parameters of the NGHs production test area in the South China Sea,including the depressurization method,and mechanical parameters of strata,NGHs occurrence characteristics,and the technological characteristics of horizontal wells.Moreover,this study explored the law of influences of the NGHs dissociation range on the stability of the overburden strata and the casing structure of a horizontal well.The results are as follows.With the dissociation of NGHs,the overburden strata of the NGHs dissociation zone subsided and formed funnelshaped zones and then gradually stabilized.However,the upper interface of the NGHs dissociation zone showed significant redistribution and discontinuity of stress.Specifically,distinct stress concentration and corresponding large deformation occurred in the build-up section of the horizontal well,which was thus prone to suffering shear failure.Moreover,apparent end effects occurred at the end of the horizontal well section and might cause the deformation and failure of the casing structure.Therefore,it is necessary to take measures in the build-up section and at the end of the horizontal section of the horizontal well to prevent damage and ensure the wellbore safety in the long-term NGHs exploitation.

Carbon isotopic fractionation during vaporization of low molecular weight hydrocarbons(C6–C12)

Three series of laboratory vaporization experiments were conducted to investigate the carbon isotope fractionation of low molecular weight hydrocarbons（LMWHs）during their progressive vaporization.In addition to the analysis of a synthetic oil mixture,individual compounds were also studied either as pure single phases or mixed with soil.This allowed influences of mixing effects and diffusion though soil on the fractionation to be elucidated.The LMWHs volatilized in two broad behavior patterns that depended on their molecular weight and boiling point.Vaporization significantly enriched the ^13C present in the remaining components of the C6–C9 fraction,indicating that the vaporization is mainly kinetically controlled;the observed variations could be described with a Rayleigh fractionation model.In contrast,the heavier compounds（n-C10–n-C12）showed less mass loss and almost no significant isotopic fractionation during vaporization,indicating that the isotope characteristics remained sufficiently constant for these hydrocarbons to be used to identify the source of an oil sample,e.g.,the specific oil field or the origin of a spill.Furthermore,comparative studies suggested that matrix effects should be considered when the carbon isotope ratios of hydrocarbons are applied in the field.

Hydrate phase transition and seepage mechanism during natural gas hydrates production tests in the South China Sea:A review and prospect

Natural gas hydrates(NGHs)are globally recognized as an important type of strategic alternative energy due to their high combustion efficiency,cleanness,and large amounts of resources.The NGHs reservoirs in the South China Sea(SCS)mainly consist of clayey silts.NGHs reservoirs of this type boast the largest distribution range and the highest percentage of resources among NGHs reservoirs in the world.However,they are more difficult to exploit than sandy reservoirs.The China Geological Survey successfully carried out two NGHs production tests in the Shenhu Area in the northern SCS in 2017 and 2020,setting multiple world records,such as the longest gas production time,the highest total gas production,and the highest average daily gas production,as well as achieving a series of innovative theoretical results.As suggested by the in-depth research on the two production tests,key factors that restrict the gas production efficiency of hydrate dissociation include reservoir structure characterization,hydrate phase transition,multiphase seepage and permeability enhancement,and the simulation and regulation of production capacity,among which the hydrate phase transition and seepage mechanism are crucial.Study results reveal that the hydrate phase transition in the SCS is characterized by low dissociation temperature,is prone to produce secondary hydrates in the reservoirs,and is a complex process under the combined effects of the seepage,stress,temperature,and chemical fields.The multiphase seepage is controlled by multiple factors such as the physical properties of unconsolidated reservoirs,the hydrate phase transition,and exploitation methods and is characterized by strong methane adsorption,abrupt changes in absolute permeability,and the weak flow capacity of gas.To ensure the long-term,stable,and efficient NGHs exploitation in the SCS,it is necessary to further enhance the reservoir seepage capacity and increase gas production through secondary reservoir stimulation based on initial reservoir stimulation.With the constant progress in the NGHs industrialization,great efforts should be made to tackle the difficulties,such as determining the micro-change in temperature and pressure,the response mechanisms of material-energy exchange,the methods for efficient NGHs dissociation,and the boundary conditions for the formation of secondary hydrates in the large-scale,long-term gas production.