大型综合医院急诊科分级分区细化扩展预检排查新型冠状病毒感染性肺炎患者的实践

目的制定快速有效的预检排查方案,保证急诊科在救治急危重症患者的同时准确排查出新型冠状病毒肺炎患者。方法采用细化的、扩展的三级预检排查方案,主要包括制定严格的预检排查标准、细化预检排查流程及工作人员职责、不同患者分区诊疗等措施。结果2020年1月21日—2月27日共预检分诊患者6367例,其中高疑患者159例,低疑待排患者833例,确诊31例,包括省内首例无流行病学史的社区感染病例和2例4次核酸检测阴性后确诊的患者。结论分级分区细化扩展的预检排查方案保证急诊科救治急危重症患者的同时准确筛查出新型冠状病毒肺炎患者,达到零漏诊、零院内感染的目标。

Efficient ozonation of reverse osmosis concentrates from petroleum refinery wastewater using composite metal oxideloaded alumina

Novel Mn–Fe–Mg-and Mn–Fe–Ce-loaded alumina（Mn–Fe–Mg/Al2O3 and Mn–Fe–Ce/Al2O3） were developed to catalytically ozonate reverse osmosis concentrates generated from petroleum refinery wastewaters（PRW-ROC）. Highly dispersed 100–300-nm deposits of composite multivalent metal oxides of Mn（Mn^2＋）, Mn^3＋,and Mn^4＋, Fe（Fe^2＋）and Fe^3＋ and Mg（Mg^2＋）, or Ce（Ce^4＋） were achieved on Al2O3 supports. The developed Mn–Fe–Mg/Al2O3 and Mn–Fe–Ce/Al2O3 exhibited higher catalytic activity during the ozonation of PRW-ROC than Mn–Fe/Al2O3, Mn/Al2O-3, Fe/Al2O3, and Al2O3. Chemical oxygen demand removal by Mn–Fe–Mg/Al2O3-or Mn–Fe–Ce/Al2O3-catalyzed ozonation increased by 23.9% and23.2%, respectively, in comparison with single ozonation.Mn–Fe–Mg/Al2O3 and Mn–Fe–Ce/Al2O3 notably promoted áOH generation and áOH-mediated oxidation. This study demonstrated the potential use of composite metal oxide-loaded Al2O3 in advanced treatment of bio-recalcitrant wastewaters.

Laboratory studies of rice bran as a carbon source to stimulate indigenous microorganisms in oil reservoirs

There is a great interest in developing cost-efficient nutrients to stimulate microorganisms in indigenous microbial enhanced oil recovery（IMEOR） processes.In the present study,the potential of rice bran as a carbon source for promoting IMEOR was investigated on a laboratory scale.The co-applications of rice bran,K2HPO4 and urea under optimized bio-stimulation conditions significantly increased the production of gases,acids and emulsifiers.The structure and diversity of microbial community greatly changed during the IMEOR process,in which Clostridium sp.,Acidobacteria sp.,Bacillus sp.,and Pseudomonas sp.were dominant.Pressurization,acidification and emulsification due to microbial activities and interactions markedly improved the IMEOR processes.This study indicated that rice bran is a potential carbon source for IMEOR.

Rapid aerobic granulation using biochar for the treatment of petroleum refinery wastewater

Aerobic granular sludge technology has great potential for the treatment of petroleum refinery wastewater.However,strategies to shorten the granulation time and improvement the stability still need to be developed.In this work,biochar was prepared from waste petroleum activated sludge(biochar-WPS) and used in a sequencing batch reactor for the treatment of petroleum refinery wastewater.Biochar-WPS presented the surface area of 229.77 m2/g,pore volume of 0.28 cm3/g,H/C and O/C atomic ratios of 0.42 and 0.21,respectively.The porous structure and a high degree of hydrophilicity were found to facilitate microbial colonization and adhesion as well as particle aggregation.Application of biochar-WPS resulted in the formation of more substantial and stable aerobic granules(~66% of granules> 0.46 mm diameter) 15 days earlier compared with the control.The addition of biochar-WPS enhanced the average removal efficiency of chemical organic demand(~3%),oil(~4%)and total nitrogen(~10%) over the control.Increased microbial richness and diversity were observed within the formed granules and had an increased(~4%) proportion of denitrifying bacteria.These results indicate that an aerobic granulation mechanism using biochar-WPS is a feasible option for the treatment of petroleum refinery wastewater.

Vertically grown MoS_(2)nanosheets on graphene with defect-rich structure for efficient sodium storage

The synthesis of a perpendicular growth structure of MoS_(2)nanosheets on graphene for efficient sodium storage is challenging yet ideal due to the benefits of open ion diffusion channels and high electronic conductivity.In this study,we have successfully fabricated a novel structure of vertical MoS_(2)nanosheets on graphene,with ZnS nanoparticles serving as bonding points(MoS_(2)/ZnS/G),through a facile hydrothermal method.During the synthesis process,Zn^(2+)not only acts as a landing site for the vertical growth of MoS_(2)nanosheets but also triggers the formation of a defect-rich structure in the final samples.This unique architecture of MoS_(2)/ZnS/G effectively combines the advantages of a vertically aligned geometry and a defectrich structure for energy storage.The resulting structure displays shortened transport paths for electrons/ions,enhanced conductivity,improved structural integrity,and an increased number of active sites for promising electrochemical performance.As expected,when used as anode for sodium-ion batteries,the as-synthesize d MoS_(2)/ZnS/G exhibits excellent rate capability(high capacity of 298 mAh·g^(-1)at 5 A·g^(-1))and good cycling stability(a capacity decay of 0.056%per cycle after 500 cycles at 1 A·g^(-1)).According to the kinetic investigations,the electrochemical process of the MoS_(2)/ZnS/G sample is primarily governe d by a pseudocapacitive behavior,which enhances the charge/discharge kinetics and allows the MoS_(2)/ZnS/G structure to remain intact during cycling.

Nickel sulfide-based energy storage materials for high-performance electrochemical capacitors

Supercapacitors are favorable energy storage devices in the field of emerging energy technologies with high power density,excellent cycle stability and environmental benignity.The performance of supercapacitors is definitively influenced by the electrode materials.Nickel sulfides have attracted extensive interest in recent years due to their specific merits for supercapacitor application.However,the distribution of electrochemically active sites critically limits their electrochemical performance.Notable improvements have been achieved through various strategies such as building synergetic structures with conductive substrates,enhancing the active sites by nanocrystallization and constructing nanohybrid architecture with other electrode materials.This article overviews the progress in the reasonable design and preparation of nickel sulfides and their composite electrodes combined with various bifunctional electric double-layer capacitor(EDLC)-based substances(e.g.,graphene,hollow carbon)and pseudocapacitive materials(e.g.,transition-metal oxides,sulfides,nitrides).Moreover,the corresponding electrochemical performances,reaction mechanisms,emerging challenges and future perspectives are briefly discussed and summarized.

SnO_(2) quantum dots modified N-doped carbon as high-performance anode for lithium ion batteries by enhanced pseudocapacitance

SnO_(2) is considered to be a promising candidate as anode material for lithium ion batteries,due to its high theoretical specific capacity(1494 mAh·g^(-1)).Nevertheless,SnO_(2)-based anodes suffer from poor electronic conductivity and serious volume variation(300%)during lithiation/delithiation process,leading to fast capacity fading.To solve these problems,SnO_(2) quantum dots modified N-doped carbon spheres(SnO_(2) QDs@N-C)are fabricated by facile hydrolysis process of SnCl2,accompanied with the polymerization of polypyrrole(PPy),followed by a calcination method.When used as anodes for lithium ion batteries,SnO_(2) QDs@N-C exhibits high discharge capacity,superior rate properties as well as good cyclability.The carbon matrix completely encapsulates the SnO_(2) quantum dots,preventing the aggregation and volume change during cycling.Furthermore,the high N content produces abundant defects in carbon matrix.It is worth noting that SnO_(2) QDs@N-C shows excellent capacitive contribution properties,which may be due to the ultra-small size of SnO_(2) and high conductivity of the carbon matrix.