Effect of synergistic action of ultrasonic vibration and solidification pressure on tensile properties of vacuum counter-pressure casting aluminum alloy

The effect of synergistic action of ultrasonic vibration and solidification pressure on tensile properties of vacuum counter-pressure casting ZL114 A alloys was studied systemically through testing and analyzing the tensile strength and elongation subjected to different ultrasonic powers and solidification pressures. The results indicate that the synergistic action of ultrasonic vibration and solidification pressure can result in the refinement of grains and improvement of tensile properties. Both the highest tensile strength and elongation of aluminum alloy were obtained under synergistic action of 600 W ultrasonic power and 350 kPa solidification pressure. Moreover, the tensile fracture morphology shows obvious ductile fracture characteristics. When the solidification pressure is lower than 300 kPa, the effect of ultrasonic power on tensile strength and elongation is more obvious, but when the solidification pressure is higher than 300 kPa, the effect of solidification pressure on tensile strength and elongation is greater. Meanwhile, the size and morphology of the eutectic silicon were improved significantly by the ultrasonic vibration and pressurized solidification. The strip and massive eutectic silicon phase are completely converted into small short rod-like and evenly distributed Si phases at the grain boundary of primary α-Al.

Density and solidification feeding model of vacuum counter-pressure cast aluminum alloy under grade-pressuring conditions

The density of vacuum counter-pressure cast aluminum alloy samples under grade-pressuring condition was studied. The effect of grade pressure difference and time on the density of aluminum alloys was discussed, and the solidification feeding model under grade-pressuring condition was established. The results indicate the grade-pressured solidification feeding ability of vacuum counter-pressure casting mainly depends on grade pressure difference and time. With the increase of grade pressure difference, the density of all the aluminum alloy samples increases, and the trend of change in density from the pouring gate to the top location is first decreasing gradually and then increasing. In addition, in obtaining the maximum density, the optimal grade-pressuring time is different for samples with different wall thicknesses, and the solidification time when the solid volume fraction of aluminum alloy reaches about 0.65 appears to be the optimal beginning time for gradepressuring.

Preparation of narrow band gap V_2O_5/TiO_2 composite films by micro-arc oxidation

V2Os/TiO2 composite films were prepared on pure titanium substmtes via micro-arc oxidation （MAO） in electrolytes consisting of NaVO3. Their morphology and dements were characterized by scanning electron microscopy （SEM） and energy-dispersive X-ray （EDX） analysis. Phase composition and valence states of species in the films were characterized by X-ray diffraction （XRD） and X-ray photoelec- tron spectroscopy （XPS）. Ultraviolet-visible diffuse reflectance spectra （UV-Vis DRS） were also employed to evaluate the photophysical property of the films. The VEOs/TiO2 composite films show a sheet-like morphology. Not only V205 phase appears in the films when the NaVO3 concentration of the electrolyte is higher than 6,10 g/L and is loaded at the surface of anatase, but also V4＋ is incorporated into the crystal lattice of anatase. In comparison with pure TiO2 films the V2Os/TiO2 composite films exhibit significantly narrow band gap energy. The film prepared in an electrolyte consisting of NaVO3 with a concentration of 8.54 g/L exhibits the narrowest band gap energy, which is approximately 1.89 eV. The V2Os/TiO2 composite films also have the significantly enhanced visible light photocatalytic activity. The film prepared in an electrolyte consisting of NaVO3 with a concentration of 8.54 g/L exhibits the best photocatalytic activity and about 93% of rhodamine is degraded after 14 h visible light radiation.