Static Bending Creep Properties of Glass Fiber Surface Composite Wood

To study the static bending creep properties of glass fiber reinforced wood,glass fiber reinforced poplar(GFRP)specimens were obtained by pasting glass fiber on the upper and lower surfaces of Poplar(Populus euramevicana,P),the performance of Normal Creep(NC)and Mechanical Sorptive Creep(MSC)of GFRP and their influencing factors were tested and analyzed.The test results and analysis show that:(1)The MOE and MOR of Poplar were increased by 17.06%and 10.00%respectively by the glass fiber surface reinforced composite.(2)The surface reinforced P with glass fiber cloth only exhibits the NC pattern of wood and loses the MSC characteristics of wood,regardless of the constant or alternating changes in relative humidity.(3)The instantaneous elastic deformation,viscoelastic deformation,viscous deformation and total creep deflection of GFRP are positively correlated with the stress level of the external load applied to the specimen.Still,the specimen’s creep recovery rate is negatively correlated with the stress level of the external load applied to the specimen.The static creep deflection and viscous deformation of GFRP increase with the increase of the relative humidity of the environment.(4)The MSC maximum creep deflection of GFRP increased by only 7.41%over the NC maximum creep deflection,but the MSC maximum creep deflection of P increased by 199.25%over the NC maximum creep deflection.(5)The Burgers 4-factor model and the Weibull distribution equation can fit the NC and NC recovery processes of GFRP well.

Hybrid Precoding for mm Wave Massive MIMO Systems with Different Antenna Arrays

In this paper, the performance of hybrid precoding is investigated for mmWave massive MIMO systems with different antenna arrays. The hybrid precoding with partially connected architecture (PCA) is adopted. The spectral efficiency (SE) and received energy efficiency (EE) are investigated by considering four types of antenna arrays, including uniform linear array (ULA), uniform rectangular planar array (URPA), uniform hexagonal planar array (UHPA), and uniform circular planar array (UCPA), respectively. We focus on analysis at the antenna response vector and utilize the idea of orthogonal matching pursuit algorithm to seek the optimal hybrid precoder. Furthermore, the trade-off of precoding architectures is studied between SE and received EE. Simulation results show that if the uniform planar array antenna is more concentrated, the SE and receive EE will be higher. Considering SE and received EE, the performance of planar arrays outperform linear array. There exist different optimal radio-frequency chain numbers to maximize the SE for planar array and linear array. In addition, the PCA can achieve relatively higher received EE while the SE is close to the fully connected architecture and the full digital architecture.

Outage Probability and Achievable Rate Analysis for Massive MIMO Downlink with Mixed-DAC and MF Precoding

This paper analyses of the outage probability and the achievable rate of massive multi-input-multi-output(MIMO) systems, in which the base station(BS) is equipped with digital-to-analog-converters(DACs) of mixed-level resolution. And the matched-filter(MF) precoding is used on the BS. Closedform expressions are derived by the distribution of user-interference power and other statistical properties in the signal-to-interference-plus-noise-ratio. Then, the combination of mixed-DACs resolution profile is chosen about outage probability and achievable rate with the BS energy consumption. And the resolution configurations between the outage probability and the achievable rate and the BS energy consumption are given. Meanwhile, Effects of related parameters and channel errors are analysed about outage probability and achievable rate. The numerical results show that the correctness of the formula derivations. As the number of users increases the system's achievable rate increases and the outage probability decreases. The selected resolution configuration system has better comprehensive performance.

高铁场景下联合天线与IOS单元选择的分布式IOS-SM传输方案

针对高铁场景下封闭车厢带来的高信号穿透损耗导致传输速率下降问题,提出一种分布式智能全表面(intelligent omni-surface,IOS)辅助空间调制(spatial modulation,SM)的传输方案。首先,采用SM技术保证索引信息部分不受穿透损耗的影响;然后,为了减小远距离IOS车窗的高路径损耗和功率损耗,根据最大化接收信噪比原则对分布式IOS遍历选择,激活最佳IOS车窗传输SM调制信息。最后,为了减小缺失直视路径增益对系统容量性能的影响,基于功率损耗模型,采用天线移除原则和排序选择方式,对接收天线和IOS单元进行动态选择激活。仿真结果表明,相比于传统中继转发和可重构智能超表面-空间调制(reconfigurable intelligence surface-SM,RIS-SM)方案,所提方案更适合高铁通信场景。并且在功率损耗模型下,联合天线与IOS单元选择的分布式IOS-SM方案仍能够保证系统高性能传输。

Late Jurassic adakitic ore-bearing granodiorite porphyry intrusions in the Xiaokele porphyry Cu(–Mo)deposit,Northeast China:implications for petrogenesis and tectonic setting

The Xiaokele Cu(–Mo)deposit is a recently discovered porphyry deposit in the northern Great Xing’an Range(GXR)of northeast China.The ore bodies in this deposit are mainly hosted within granodiorite porphyry intrusions.Potassic,phyllic,and propylitic alteration zones develop from center to edge.In this paper,we present zircon LA–ICP–MS U–Pb ages,zircon Hf isotopic compositions,and whole-rock geochemistry of the ore-bearing granodiorite porphyries from the Xiaokele Cu(–Mo)deposit.Zircon U–Pb dating suggests that the Xiaokele granodiorite porphyries were emplaced at 148.8±1.1 Ma(weighted-mean age;n=14).The Xiaokele granodiorite porphyries display high SiO2,Al2O3,Sr,and Sr/Y,low K2O/Na2O,MgO,Yb,and Y,belonging to high-SiO2 adakites produced by partial melting of the subducted oceanic slab.Marine sediments were involved in the magma source of the Xiaokele granodiorite porphyries,as indicated by enriched Sr–Nd isotopic compositions(eNd(-t)=-1.17–-0.27),low positive zircon eHf(t)values(0.4–2.2),and high Th contents(4.06–5.20).The adakitic magma subsequently interacted with the mantle peridotites during ascent through the mantle wedge.The Xiaokele granodiorite porphyries were derived from slab melting during the southward subduction of the Mongol–Okhotsk Ocean.

Late Cretaceous K-rich rhyolitic crystal tuffs from the Chuduoqu area in Eastern Qiangtang subterrane:evidence for crustal thickening of the central Tibetan Plateau prior to India–Asia collision

In order to constrain whether the Lhasa–Qiangtang collision contributed to an early crustal thickening of the central Tibetan Plateau prior to the India–Asia collision,we present zircon LA–ICP–MS U–Pb ages,wholerock geochemistry,and zircon Hf isotopic compositions of the newly discovered rhyolitic crystal tuffs from the Chuduoqu area in the eastern Qiangtang subterrane,central Tibet.Zircon U–Pb dating suggests that the Chuduoqu rhyolitic crystal tuffs were emplaced at ca.68 Ma.The Chuoduoqu rhyolitic crystal tuffs display high SiO_(2) and K2 O,and low MgO,Cr,and Ni.Combined with their zircon Hf isotopic data,we suggest that they were derived from partial melting of the juvenile lower crust,and the magma underwent fractional crystallization and limited upper continental crustal assimilation during its evolution prior to eruption.They should be formed in a post-collisional environment related to lithospheric mantle delamination.The Chuduoqu rhyolitic crystal tuffs could provide important constraints on the Late Cretaceous crustal thickening of the central Tibetan Plateau caused by the Lhasa–Qiangtang collision.

Sulfur-and Lead-Isotope Geochemistry of the Balugou Cu-Pb-Zn Skarn Deposit in the Wulonggou Area in the Eastern Kunlun Orogen, NW China

The small-scale Balugou Cu-Pb-Zn skarn deposit（45 298 tonnages of ore at 0.1% to 3.99% Cu, 0.20% to 0.43% Pb and 0.76% to 10.92% Zn） is located in the Wulonggou area in the eastern Kunlun orogen, NW China. Ore deposition is spatially and temporally related with the pre-collisional Anisian Balugou granites（~244 Ma）. The mineralization hosted by the contact between marble beds within the Paleo-Proterozoic Jinshuikou Group and Balugou granites, was structurally and lithologically controlled. The mineralogy of the Balugou deposit includes an early simple skarn mineral gangue（epidote with little diopside） and a late complicated quartz sulfide assemblage（pyrite, pyrrhotite, chalcopyrite, sphalerite, galena, bornite, quartz, carbonate and chlorite）. The δ34S values of eighteen sulfides range from-2.1‰ to ＋2.8 ‰, with an average of ＋0.07‰, and the calculated δ34SH2S values for H2 S in hydrothermal fluids range from-3.2‰ to ＋2.4‰, with an average of ＋0.03‰, suggesting a relatively homogeneous magmatic（±mantle） source, with sulfur produced directly by the Balugou granites. The sixteen sulfides have 206Pb/204 Pb ratios from 18.367 4 to 18.384 1, 207Pb/204 Pb ratios from 15.634 6 to 15.641 5, and 208Pb/204 Pb ratios from 38.455 5 to 38.485 0, which are close to those of K-feldspars from the Balugou granites, but are far away from age-corrected lead isotopic ratios of six wall-rock samples. So it was considered that the Pb sources of sulfides must be almost derived from the Balugou granites rather than the older wall-rocks. Collectively, it＇s suggested that the Balugou Cu-Pb-Zn deposit belongs to skarn deposit, and the sulfur and lead deposited in it were leached from the Anisian Balugou granites.