A 16 kV/20 A power supply was developed for the extraction grid of prototype radio frequency（RF） ion source of neutral beam injector. To acquire the state signals of extraction grid power supply（EGPS） and control ...A 16 kV/20 A power supply was developed for the extraction grid of prototype radio frequency（RF） ion source of neutral beam injector. To acquire the state signals of extraction grid power supply（EGPS） and control the operation of the EGPS, a data acquisition and control system has been developed. This system mainly consists of interlock protection circuit board, photoelectric conversion circuit, optical fibers, industrial compact peripheral component interconnect（CPCI） computer and host computer. The human machine interface of host computer delivers commands and data to program of the CPCI computer, as well as offers a convenient client for setting parameters and displaying EGPS status. The CPCI computer acquires the status of the power supply. The system can turn-off the EGPS quickly when the faults of EGPS occur. The system has been applied to the EGPS of prototype RF ion source. Test results show that the data acquisition and control system for the EGPS can meet the requirements of the operation of prototype RF ion source.展开更多
A radio frequency(RF) ion source was developed for neutral beam injector in Institute of Plasma Physics, Chinese Academy of Sciences(ASIPP). A cylindrical driver based RF plasma source was tested and optimized for lon...A radio frequency(RF) ion source was developed for neutral beam injector in Institute of Plasma Physics, Chinese Academy of Sciences(ASIPP). A cylindrical driver based RF plasma source was tested and optimized for long pulse operation. Recently, the plasma source achieved 1000 s stable plasma discharge with RF power of 35 k W and source pressure of 0.7 Pa for the first time.The heat loading on each of driver components such as the Faraday shield(FS), RF coil and expansion chamber was measured by the water flow calorimeter system. The experiment results showed that FS is the component with highest heat loading and the heat loading on FS was about 65.8% of total heat loading on source. The details of the long pulse operation of RF plasma source are presented in this paper.展开更多
基金supported by National Natural Science Foundation of China(Contract Nos.11505225&11675216)Foundation of ASIPP(Contract No.DSJJ-15-GC03)the Key Program of Research and Development of Hefei Science Center,CAS(2016HSC-KPRD002)
文摘A 16 kV/20 A power supply was developed for the extraction grid of prototype radio frequency（RF） ion source of neutral beam injector. To acquire the state signals of extraction grid power supply（EGPS） and control the operation of the EGPS, a data acquisition and control system has been developed. This system mainly consists of interlock protection circuit board, photoelectric conversion circuit, optical fibers, industrial compact peripheral component interconnect（CPCI） computer and host computer. The human machine interface of host computer delivers commands and data to program of the CPCI computer, as well as offers a convenient client for setting parameters and displaying EGPS status. The CPCI computer acquires the status of the power supply. The system can turn-off the EGPS quickly when the faults of EGPS occur. The system has been applied to the EGPS of prototype RF ion source. Test results show that the data acquisition and control system for the EGPS can meet the requirements of the operation of prototype RF ion source.
基金supported by Key Program of Research and Development of Hefei Science Center,CAS (Grant No. 2016HSC-KPRD002)National Key R&D Program of China (Grant No. 2017YFE300101)National Natural Science Foundation of China (Grant Nos. 11505224,11505225,11505226,11675215)
文摘A radio frequency(RF) ion source was developed for neutral beam injector in Institute of Plasma Physics, Chinese Academy of Sciences(ASIPP). A cylindrical driver based RF plasma source was tested and optimized for long pulse operation. Recently, the plasma source achieved 1000 s stable plasma discharge with RF power of 35 k W and source pressure of 0.7 Pa for the first time.The heat loading on each of driver components such as the Faraday shield(FS), RF coil and expansion chamber was measured by the water flow calorimeter system. The experiment results showed that FS is the component with highest heat loading and the heat loading on FS was about 65.8% of total heat loading on source. The details of the long pulse operation of RF plasma source are presented in this paper.
