期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Effect of Lightweight Aggregates Incorporation on the Mechanical Properties and Shrinkage Compensation of a Cement-Ground Granulated Blast Furnace Slag-Phosphogypsum Ternary System
1
作者 Yu Wang Mengyang Ma +2 位作者 Yong Long qingxiang zhao Zhifei Cheng 《Fluid Dynamics & Materials Processing》 EI 2024年第8期1773-1784,共12页
Shrinkage-induced cracking is a common issue in concrete structures,where the formation of cracks not only affects the aesthetic appearance of concrete but also potentially reduces its durability and strength.In this ... Shrinkage-induced cracking is a common issue in concrete structures,where the formation of cracks not only affects the aesthetic appearance of concrete but also potentially reduces its durability and strength.In this study,the effect of ceramsite sand addition on the properties of a ternary system of cement-ground granulated blast furnace slag(GGBFS)-phosphogypsum(PG)is investigated.In particular,the fluidity,rheology,hydration heat,compressive strength,autogenous shrinkage,and drying shrinkage of the considered mortar specimens are analyzed.The results indicate that an increase in PG content leads to a decrease in fluidity,higher viscosity,lower exothermic peak,and lower compressive strength.However,the shrinkage of the mortar specimens is effectively compensated.The incorporation of internal curing water from ceramsite sand improves fluidity,decreases both yield stress and viscosity,enhances the degree of hydration,and induces mortar expansion.However,the inferior mechanical properties of the ceramsite sand generally produce a decrease in the compressive strength. 展开更多
关键词 PHOSPHOGYPSUM ceramsite sand internal curing mechanical property SHRINKAGE
下载PDF
聚(氨酯-脲-酰胺)热塑性弹性体的合成及表征 被引量:2
2
作者 阙永婵 雪冰峰 +8 位作者 张佳晖 厍海波 赵蔚 崔喆 张晓朦 刘民英 赵清香 庞新厂 付鹏 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2021年第7期14-18,26,共6页
以双端氨基的尼龙1212预聚物(OPA)为硬段、异氰酸酯封端的聚醚型聚氨酯预聚物(OPU)为软段,通过改变软、硬段的摩尔比制得了不同相对分子质量的聚(氨酯-脲-酰胺)热塑性弹性体(PUUA)。通过傅里叶变换红外光谱(FT-IR)考察了OPU合成过程中-... 以双端氨基的尼龙1212预聚物(OPA)为硬段、异氰酸酯封端的聚醚型聚氨酯预聚物(OPU)为软段,通过改变软、硬段的摩尔比制得了不同相对分子质量的聚(氨酯-脲-酰胺)热塑性弹性体(PUUA)。通过傅里叶变换红外光谱(FT-IR)考察了OPU合成过程中-NCO基团与C-O-C醚键的相对强度变化,进而确定了合成OPU的反应时间为60 min。通过核磁氢谱和FT-IR确定了产物结构。凝胶渗透色谱法(GPC)测试结果表明,硬、软段摩尔比在1.2~1.5范围内,产物重均分子量可在(1.82~3.59)×104范围内调控。差示扫描量热分析(DSC)结果表明,随着硬、软段摩尔比由1.2提高至1.5,硬段的熔点由185℃降低至174℃,结晶温度由167℃降低至138℃,但OPU软段的熔点和结晶温度基本不变。PUUA的力学性能测试结果表明,其拉伸强度为28 MPa,断裂伸长率可达417%,缺口冲击未能冲断,是一种性能优异的热塑性弹性体。 展开更多
关键词 尼龙1212 聚四氢呋喃 聚(氨酯-脲-酰胺) 热塑性聚酰胺弹性体
下载PDF
聚对苯二甲酰癸二胺的固相聚合反应过程 被引量:2
3
作者 邹海龙 冯绪 +4 位作者 付鹏 崔喆 张晓朦 赵清香 刘民英 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2020年第5期1-5,共5页
利用差示扫描量热分析、热失重分析和变温红外光谱等表征手段对聚对苯二甲酰癸二胺(PA10T)盐的固相聚合过程进行了系统研究。研究结果表明,在PA10T盐固相聚合过程中,反应温度起着至关重要的作用,230℃以下固相聚合反应很难发生;在240℃... 利用差示扫描量热分析、热失重分析和变温红外光谱等表征手段对聚对苯二甲酰癸二胺(PA10T)盐的固相聚合过程进行了系统研究。研究结果表明,在PA10T盐固相聚合过程中,反应温度起着至关重要的作用,230℃以下固相聚合反应很难发生;在240℃反应2 h或250℃反应1 h后,PA10T盐可以完全转化为聚合物。通过分析可知,反应过程主要分为2个阶段:第1阶段,部分PA10T盐分解并释放出癸二胺;第2阶段,PA10T盐发生缩聚反应并释放出水分子。 展开更多
关键词 聚对苯二甲酰癸二胺 固相聚合 聚合过程
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部