The Tangshan area lies in the North China plain where an Ms 7.8 earthquake occurred in 1976, which is associated with a hidden active fault. To reveal the recurrence characteristics of major quakes in this area over a...The Tangshan area lies in the North China plain where an Ms 7.8 earthquake occurred in 1976, which is associated with a hidden active fault. To reveal the recurrence characteristics of major quakes in this area over a relatively long time, we have conducted a comprehensive study using geological investigations, shallow seismic exploration, boreholes, trench observations and geological dating. Five paleoearthquakes were recognized in a 6.4m-deep trench west to the Tangshan Asylum. Among them, the former three events occurred between 56.78 + 4.83ka and 89.39 ~ 7.60 ka, and the fourth event occurred around 6.9 ka, respectively, and then followed by the fifth in 1976. Seven boreholes were deployed crossing the ground fissure formed by the 1976 Tangshan earthquake at the site of No. 10 Middle School, where we have identified 25 liquefaction events in the boreholes TZC6-5 and 6-7. By the comprehensive analysis of the trench, the liquefaction events from the boreholes and the depth-time curves of drill cores, we suggest a new recurrence model of major quakes in this area. It is not a constant recurring cycle since 210 ka, instead consisting of six alternating seismically quiet and active stages. Of them, stage I (〉177 ka) was a quiescent period in seismicity, stage II (from 143 ka to 177 ka) was an active one, stage III (from 102 ka to 143 ka) was quiescent again, stage IV (from 56 ka to 102 ka) had many quakes, stage V (from 6.9 ka to 56 ka) became quiet, and stage VI (from 6.9 ka to now) was the beginning of a new seismically active period.展开更多
The Quanzhou basin and its adjacent areas locate in the middle of the southeastern coast seismic belt on the Chinese mainland. The very fine geometry structure of this area from near ground to Moho interface and the r...The Quanzhou basin and its adjacent areas locate in the middle of the southeastern coast seismic belt on the Chinese mainland. The very fine geometry structure of this area from near ground to Moho interface and the relationship between the deep and shallow faults are obtained based on deep seismic reflection profiling. This profile is the first deep seismic reflection profile in this area and it indicates that the crust can be divided into the upper crust and the lower crust and the thickness of crust is from 29.5 km to 31 km in this area. The upper crust and the lower crust can be also divided into two layers. There are shallow normal faults developed in the upper crust and extending to the depth from 6 km to 12 km. The angle of those listric faults decreases with depth and the faults joint into the C1 interface (detachment surface). There is a high angle fault under the Yong’an-Jinjiang fault belt which cuts off the interface of the upper crust and the lower crust and the Moho interface. Although there is no connection between the shallow and the deep faults, it offers deep structural environment for moderate and strong earthquake because of the deep high angle fault. This exploration result improves the reliability and precision of explanation of deep crustal structure in this area. The pull-apart and listric normal fault model indicates that the upper crust structure accords to the dynamic process of Taiwan Straits. This is helpful for seismicity estimation of Quanzhou and its adjacent area and important for obtaining more of the dynamic process of the southeast coast seismic belt.展开更多
Lying at the junction of the Dabashan, Longmenshan and Qinling mountains, the Micangshan Orogenic Belt coupled with a basin is a duplex structure and back-thrust triangular belt with little horizontal displacement, sm...Lying at the junction of the Dabashan, Longmenshan and Qinling mountains, the Micangshan Orogenic Belt coupled with a basin is a duplex structure and back-thrust triangular belt with little horizontal displacement, small thrust faults and continuous sedimentary cover. On the basis of 3D seismic data, and through sedimentary and structural research, the Micangshan foreland can be divided into five subbelts, which from north to south are: basement thrust, frontal thrust, foreland depression-back-thrust triangle, foreland fold belt or anticline belt, and the Tongjiang Depression. Along the direction of strike from west to east, the arcuate structural belt of Micangshan can be divided into west, middle and east segments. During the collision between the Qinling and Yangtze plates, the Micangshan Orogenic Belt was subjected to the interaction of three rigid terranes: Bikou, Foping, and Fenghuangshan (a.k.a. Ziyang) terranes. The collision processes of rigid terranes controlled the structural development of the Micangshan foreland, which are: (a) the former collision between the Micangshan-Hannan and Bikou terranes forming the earlier rudiments of the structure; and (b) the later collision forming the main body of the structural belt. The formation processes of the Micangshan Orogenic Belt can be divided into four stages: (1) in the early stage of the Indosinian movement, the Micangshan-Hannan Rigid Terrane was jointed to the Qinling Plate by the clockwise subduction of the Yangtze Plate toward the Qinling Plate; (2) since the late Triassic, the earlier rudiments of the Tongnanba and Jiulongshan anticlines and corresponding syncline were formed by compression from different directions of the Bikou, Foping and Micangshan-Hannan terranes; (3) in the early stage of the Himalayan movement, the Micangshan-Hannan Terrane formed the Micangshan Nappe torwards the foreland basin and the compression stresses were mainly concentrated along both its flanks, whereas the Micangshan-Hannan Terrane wedged into the Qinling Orogenic Belt with force; (4) in the late stage of the Himalayan movement, the main collision of the Qinling Plate made the old basement rocks of the terrane uplift quickly, to form the Micangshan Orogenic Belt. The Micangshan foreland arcuate structure was formed due to the non-homogeneity of terrane movement.展开更多
The Cantor's dust theory is applied to investigate the scaling properites of the spatial distribution of natural fractures obtained from detailed scanline surveys of 27 field sites in the Appalachian Plateau of we...The Cantor's dust theory is applied to investigate the scaling properites of the spatial distribution of natural fractures obtained from detailed scanline surveys of 27 field sites in the Appalachian Plateau of western New York, USA. The results obtained in this study indicate: 1) fracture spacing is characterized by fractal and multifractal properties. On small scales analyses yield an average fractal dimension of 0.15, which suggests a very high degree of clustering. In contrast, on large scales, fractures tend to be more regular and evenly distributed with an average fracture dimension of 0.52; 2) fractal dimension varies with different sets in different orientations, which can be attributed to interactions between pre-existing fractures and younger ones, as well as variations of the intensity of the stresses under which the fractures were formed; 3) a time sequence of fracture set formation can be proposed based on fractal and multifractal analyses, which consists of (from old to young): N-S, NW, ENE, and NE-striking sets. This time sequence is confirmed by the study of the abutting relationships of different fracture sets observed in the field.展开更多
The Zhangzhou basin is located at the middle section of the southeast coast seismic zone of the mainland of China. Using high-resolution refraction and wide-angle reflection/refraction seismic profiling of Zhangzhou b...The Zhangzhou basin is located at the middle section of the southeast coast seismic zone of the mainland of China. Using high-resolution refraction and wide-angle reflection/refraction seismic profiling of Zhangzhou basin and its vicinity, we have obtained the crustal geometric structure and velocity structure as well as the geometric configuration and structural relationship between the deep and shallow fractures.The results show that the crust in the region is divided into the upper crust and lower crust. The thickness of the upper crust is 16.5km~18.8km, and that of the lower crust is 12.0km~13.0km. The upper crust is further divided into an upper and lower section. In the lower section of the upper crust, there is a low-velocity layer with a velocity of about 6.00km/s; the depth of the top surface of the low-velocity layer is about 12.0km, and the thickness is about 5.0km. The lower crust is also divided into an upper and lower section. The depth of Moho is 29.0km~31.8km. There are 6 normal faults in the shallow crust in this region, and most of them extend downwards to a depth of less than 4km, the maximum depth is about 5km.Below the shallow normal faults, there is a conjectural high-dip angle deep fault zone. The fault zone extends downwards till the Moho and upwards into the low-velocity layer in lower section of the upper crust. The deep and shallow faults are not tectonically connected. The combination character of deep and shallow structures in the Zhangzhou basin indicates that the Jiulongjiang fault zone is a deep fault zone with distinct characteristics and a complex deep and shallow structure background. The acquisition of deep seismic exploration results obviously enhanced the reliability of explanation of deep-structural data and the exploration precision of the region. The combination of deep and shallow structures resulted in uniform explanation results. The delamination of the crust and the characteristic of the structures are more precise and explicit. We discovered for the first time the combination characteristics of extensional structures and listric faults in the upper crust. This is not only helpful to the integrative judgment of earthquake risk in Zhangzhou and its vicinity, but also of importance for deepening the knowledge of deep dynamic processes in the southeast coast seismic zone.展开更多
基金supported by grants from the National Key Technology Research and Development Program(2008BAK50B03-05)the Key Program of Hebei Development and Reform Commission (HBYHT2007321F)
文摘The Tangshan area lies in the North China plain where an Ms 7.8 earthquake occurred in 1976, which is associated with a hidden active fault. To reveal the recurrence characteristics of major quakes in this area over a relatively long time, we have conducted a comprehensive study using geological investigations, shallow seismic exploration, boreholes, trench observations and geological dating. Five paleoearthquakes were recognized in a 6.4m-deep trench west to the Tangshan Asylum. Among them, the former three events occurred between 56.78 + 4.83ka and 89.39 ~ 7.60 ka, and the fourth event occurred around 6.9 ka, respectively, and then followed by the fifth in 1976. Seven boreholes were deployed crossing the ground fissure formed by the 1976 Tangshan earthquake at the site of No. 10 Middle School, where we have identified 25 liquefaction events in the boreholes TZC6-5 and 6-7. By the comprehensive analysis of the trench, the liquefaction events from the boreholes and the depth-time curves of drill cores, we suggest a new recurrence model of major quakes in this area. It is not a constant recurring cycle since 210 ka, instead consisting of six alternating seismically quiet and active stages. Of them, stage I (〉177 ka) was a quiescent period in seismicity, stage II (from 143 ka to 177 ka) was an active one, stage III (from 102 ka to 143 ka) was quiescent again, stage IV (from 56 ka to 102 ka) had many quakes, stage V (from 6.9 ka to 56 ka) became quiet, and stage VI (from 6.9 ka to now) was the beginning of a new seismically active period.
文摘The Quanzhou basin and its adjacent areas locate in the middle of the southeastern coast seismic belt on the Chinese mainland. The very fine geometry structure of this area from near ground to Moho interface and the relationship between the deep and shallow faults are obtained based on deep seismic reflection profiling. This profile is the first deep seismic reflection profile in this area and it indicates that the crust can be divided into the upper crust and the lower crust and the thickness of crust is from 29.5 km to 31 km in this area. The upper crust and the lower crust can be also divided into two layers. There are shallow normal faults developed in the upper crust and extending to the depth from 6 km to 12 km. The angle of those listric faults decreases with depth and the faults joint into the C1 interface (detachment surface). There is a high angle fault under the Yong’an-Jinjiang fault belt which cuts off the interface of the upper crust and the lower crust and the Moho interface. Although there is no connection between the shallow and the deep faults, it offers deep structural environment for moderate and strong earthquake because of the deep high angle fault. This exploration result improves the reliability and precision of explanation of deep crustal structure in this area. The pull-apart and listric normal fault model indicates that the upper crust structure accords to the dynamic process of Taiwan Straits. This is helpful for seismicity estimation of Quanzhou and its adjacent area and important for obtaining more of the dynamic process of the southeast coast seismic belt.
基金These research results are part of a key project carried out in 2005-2007 and financially supported by the Natural Science Foundation of China (No.40472110).
文摘Lying at the junction of the Dabashan, Longmenshan and Qinling mountains, the Micangshan Orogenic Belt coupled with a basin is a duplex structure and back-thrust triangular belt with little horizontal displacement, small thrust faults and continuous sedimentary cover. On the basis of 3D seismic data, and through sedimentary and structural research, the Micangshan foreland can be divided into five subbelts, which from north to south are: basement thrust, frontal thrust, foreland depression-back-thrust triangle, foreland fold belt or anticline belt, and the Tongjiang Depression. Along the direction of strike from west to east, the arcuate structural belt of Micangshan can be divided into west, middle and east segments. During the collision between the Qinling and Yangtze plates, the Micangshan Orogenic Belt was subjected to the interaction of three rigid terranes: Bikou, Foping, and Fenghuangshan (a.k.a. Ziyang) terranes. The collision processes of rigid terranes controlled the structural development of the Micangshan foreland, which are: (a) the former collision between the Micangshan-Hannan and Bikou terranes forming the earlier rudiments of the structure; and (b) the later collision forming the main body of the structural belt. The formation processes of the Micangshan Orogenic Belt can be divided into four stages: (1) in the early stage of the Indosinian movement, the Micangshan-Hannan Rigid Terrane was jointed to the Qinling Plate by the clockwise subduction of the Yangtze Plate toward the Qinling Plate; (2) since the late Triassic, the earlier rudiments of the Tongnanba and Jiulongshan anticlines and corresponding syncline were formed by compression from different directions of the Bikou, Foping and Micangshan-Hannan terranes; (3) in the early stage of the Himalayan movement, the Micangshan-Hannan Terrane formed the Micangshan Nappe torwards the foreland basin and the compression stresses were mainly concentrated along both its flanks, whereas the Micangshan-Hannan Terrane wedged into the Qinling Orogenic Belt with force; (4) in the late stage of the Himalayan movement, the main collision of the Qinling Plate made the old basement rocks of the terrane uplift quickly, to form the Micangshan Orogenic Belt. The Micangshan foreland arcuate structure was formed due to the non-homogeneity of terrane movement.
文摘The Cantor's dust theory is applied to investigate the scaling properites of the spatial distribution of natural fractures obtained from detailed scanline surveys of 27 field sites in the Appalachian Plateau of western New York, USA. The results obtained in this study indicate: 1) fracture spacing is characterized by fractal and multifractal properties. On small scales analyses yield an average fractal dimension of 0.15, which suggests a very high degree of clustering. In contrast, on large scales, fractures tend to be more regular and evenly distributed with an average fracture dimension of 0.52; 2) fractal dimension varies with different sets in different orientations, which can be attributed to interactions between pre-existing fractures and younger ones, as well as variations of the intensity of the stresses under which the fractures were formed; 3) a time sequence of fracture set formation can be proposed based on fractal and multifractal analyses, which consists of (from old to young): N-S, NW, ENE, and NE-striking sets. This time sequence is confirmed by the study of the abutting relationships of different fracture sets observed in the field.
基金This research was funded by the 10th Five-Year KeyProject of Fujian Province ,entitled"Exploration of active fault and seismic risk evaluationin cities in Fujian province"
文摘The Zhangzhou basin is located at the middle section of the southeast coast seismic zone of the mainland of China. Using high-resolution refraction and wide-angle reflection/refraction seismic profiling of Zhangzhou basin and its vicinity, we have obtained the crustal geometric structure and velocity structure as well as the geometric configuration and structural relationship between the deep and shallow fractures.The results show that the crust in the region is divided into the upper crust and lower crust. The thickness of the upper crust is 16.5km~18.8km, and that of the lower crust is 12.0km~13.0km. The upper crust is further divided into an upper and lower section. In the lower section of the upper crust, there is a low-velocity layer with a velocity of about 6.00km/s; the depth of the top surface of the low-velocity layer is about 12.0km, and the thickness is about 5.0km. The lower crust is also divided into an upper and lower section. The depth of Moho is 29.0km~31.8km. There are 6 normal faults in the shallow crust in this region, and most of them extend downwards to a depth of less than 4km, the maximum depth is about 5km.Below the shallow normal faults, there is a conjectural high-dip angle deep fault zone. The fault zone extends downwards till the Moho and upwards into the low-velocity layer in lower section of the upper crust. The deep and shallow faults are not tectonically connected. The combination character of deep and shallow structures in the Zhangzhou basin indicates that the Jiulongjiang fault zone is a deep fault zone with distinct characteristics and a complex deep and shallow structure background. The acquisition of deep seismic exploration results obviously enhanced the reliability of explanation of deep-structural data and the exploration precision of the region. The combination of deep and shallow structures resulted in uniform explanation results. The delamination of the crust and the characteristic of the structures are more precise and explicit. We discovered for the first time the combination characteristics of extensional structures and listric faults in the upper crust. This is not only helpful to the integrative judgment of earthquake risk in Zhangzhou and its vicinity, but also of importance for deepening the knowledge of deep dynamic processes in the southeast coast seismic zone.