Tip-and Laser-based 3D Nanofabrication in Extended Macroscopic Working Areas

The field of optical lithography is subject to intense research and has gained enormous improvement.However,the effort necessary for creating structures at the size of 20 nm and below is considerable using conventional technologies.This effort and the resulting financial requirements can only be tackled by few global companies and thus a paradigm change for the semiconductor industry is conceivable:custom design and solutions for specific applications will dominate future development(Fritze in:Panning EM,Liddle JA(eds)Novel patterning technologies.International society for optics and photonics.SPIE,Bellingham,2021.https://doi.org/10.1117/12.2593229).For this reason,new aspects arise for future lithography,which is why enormous effort has been directed to the development of alternative fabrication technologies.Yet,the technologies emerging from this process,which are promising for coping with the current resolution and accuracy challenges,are only demonstrated as a proof-of-concept on a lab scale of several square micrometers.Such scale is not adequate for the requirements of modern lithography;therefore,there is the need for new and alternative cross-scale solutions to further advance the possibilities of unconventional nanotechnologies.Similar challenges arise because of the technical progress in various other fields,realizing new and unique functionalities based on nanoscale effects,e.g.,in nanophotonics,quantum computing,energy harvesting,and life sciences.Experimental platforms for basic research in the field of scale-spanning nanomeasuring and nanofabrication are necessary for these tasks,which are available at the Technische Universitiit Ilmenau in the form of nanopositioning and nanomeasuring(NPM)machines.With this equipment,the limits of technical structurability are explored for high-performance tip-based and laser-based processes for enabling real 3D nanofabrication with the highest precision in an adequate working range of several thousand cubic millimeters.

Development and Implementation of a Rotating Nanoimprint Lithography Tool for Orthogonal Imprinting on Edges of Curved Surfaces

Uniform molding and demolding of structures on highly curved surfaces through conformal contact is a crucial yet often-overlooked aspect of nanoimprint lithography(NIL).This study describes the development of a NIL tool and its integration into a nanopositioning and nanomeasuring machine to achieve high-precision orthogonal molding and demolding for soft ultraviolet-assisted NIL(soft UV-NIL).The process was implemented primarily on the edges of highly curved plano-convex substrates to demonstrate structure uniformity on the edges.High-resolution nanostructures of sub-200-nm lateral dimension and microstructures in the range of tens of microns were imprinted.However,the nanostructures on the edges of the large,curved substrates were difficult to characterize precisely.Therefore,microstructures were used to measure the structure fidelity and were characterized using profilometry,white light interferometry,and confocal laser scanning microscopy.Regardless of the restricted imaging capabilities at high inclinations for high-resolution nanostructures,the scanning electron microscope(SEM)imaging of the structures on top of the lens substrate and at an inclination of 45°was performed.The micro and nanostructures were successfully imprinted on the edges of the plano-convex lens at angles of 45°,60°,and 90°from the center of rotation of the rotating NIL tool.The method enables precise imprinting at high inclinations,thereby presenting a different approach to soft UV-NIL on curved surfaces.

Fundamental Investigations in the Design of Five-Axis Nanopositioning Machines for Measurement and Fabrication Purposes

The majority of nanopositioning and nanomeasuring machines(NPMMs)are based on three independent linear movements in a Cartesian coordinate system.This in combination with the specific nature of sensors and tools limits the addressable part geometries.An enhancement of an NPMM is introduced by the implementation of rotational movements while keeping the precision in the nanometer range.For this purpose,a parameter-based dynamic evaluation system with quantifiable technological parameters has been set up and employed to identify and assess general solution concepts and adequate substructures.Evaluations taken show high potential for three linear movements of the object in combination with two angular movements of the tool.The influence of the additional rotation systems on the existing structure of NPMMs has been investigated further on.Test series on the repeatability of an NPMM enhanced by a chosen combination of a rotary stage and a goniometer setup are realized.As a result of these test series,the necessity of in situ position determination of the tool became very clear.The tool position is measured in situ in relation to a hemispherical reference mirror by three Fabry-Perot interferometers.FEA optimization has been used to enhance the overall system structure with regard to reproducibility and long-term stability.Results have been experimentally investigated by use of a retroreflector as a tool and the various laser interferometers of the NPMM.The knowledge gained has been formed into general rules for the verification and optimization of design solutions for multiaxial nanopositioning machines.