The effect of self-reactivation on the CO_(2) capture capacity of the spent calcium based sorbent was investigated in a dual-fixed bed reactor.The sampled sorbents from the dual-fixed bed reactor were sent for XRD,SEM...The effect of self-reactivation on the CO_(2) capture capacity of the spent calcium based sorbent was investigated in a dual-fixed bed reactor.The sampled sorbents from the dual-fixed bed reactor were sent for XRD,SEM and N_2 adsorption analysis to explain the self-reactivation mechanism.The results show that the CaO in the spent sorbent discharged from the calciner absorbs the vapor in the air to form Ca(OH)_(2) and further Ca(OH)_(2)·2 H_(2) O under environmental conditions,during which process the CO_(2) capture capacity of the spent sorbent can be self-reactivated.The microstructure of the spent sorbent is improved by the self-reactivation process,resulting in more porous microstructure,higher BET surface area and pore volume.Compared with the calcined spent sorbent that has experienced 20 cycles,the pore volume and BET surface area are increased by 6.69 times and 56.3% after self-reactivation when φ=170%.The improved microstructure makes it easier for the CO_(2) diffusion and carbonation reaction in the sorbent.Therefore,the CO_(2) capture capacity of the spent sorbent is enhanced by self-reactivation process.A self-reactivation process coupled with calcium looping process was proposed to reuse the discharged spent calcium based sorbent from the calciner.Higher average carbonation conversion and CO_(2) capture efficiency can be achieved when self-reactivated spent sorbent is used as supplementary sorbent in the calciner rather than fresh CaCO_(3) under the same conditions.展开更多
基金supported by the National Natural Science Foundation of China (51706094)。
文摘The effect of self-reactivation on the CO_(2) capture capacity of the spent calcium based sorbent was investigated in a dual-fixed bed reactor.The sampled sorbents from the dual-fixed bed reactor were sent for XRD,SEM and N_2 adsorption analysis to explain the self-reactivation mechanism.The results show that the CaO in the spent sorbent discharged from the calciner absorbs the vapor in the air to form Ca(OH)_(2) and further Ca(OH)_(2)·2 H_(2) O under environmental conditions,during which process the CO_(2) capture capacity of the spent sorbent can be self-reactivated.The microstructure of the spent sorbent is improved by the self-reactivation process,resulting in more porous microstructure,higher BET surface area and pore volume.Compared with the calcined spent sorbent that has experienced 20 cycles,the pore volume and BET surface area are increased by 6.69 times and 56.3% after self-reactivation when φ=170%.The improved microstructure makes it easier for the CO_(2) diffusion and carbonation reaction in the sorbent.Therefore,the CO_(2) capture capacity of the spent sorbent is enhanced by self-reactivation process.A self-reactivation process coupled with calcium looping process was proposed to reuse the discharged spent calcium based sorbent from the calciner.Higher average carbonation conversion and CO_(2) capture efficiency can be achieved when self-reactivated spent sorbent is used as supplementary sorbent in the calciner rather than fresh CaCO_(3) under the same conditions.
