Remelting rejected electrolytic manganese metal (EMM) scrap was investigated by electroslag remelting (ESR) process through industrial experiment. The results indicated that the ANF-6 slag (70 wt.% CaF_(2) + 30 wt.% A...Remelting rejected electrolytic manganese metal (EMM) scrap was investigated by electroslag remelting (ESR) process through industrial experiment. The results indicated that the ANF-6 slag (70 wt.% CaF_(2) + 30 wt.% Al_(2)O_(3)) and deoxidizer could promote the desulfurization of ESR manganese in an air atmosphere. Under an air atmosphere, the sulfur in the ingot decreased to 0.0534 wt.% with a desulfurization ratio of ESR manganese of 53.2% by using ANF-6 slag and water-cooled copper electrode electroslag remelting rejected EMM scrap, suggesting its efficient removal. The electroslag ingots exhibited uneven chemical composition in an air atmosphere and cooling condition of the ESR process. The metal manganese could be oxidized by electroslag remelting of rejected EMM scrap in an air atmosphere with MnO content in the final slag of 21.9 wt.%. Besides, the activity of MnO in slag increased with increasing remelting temperature, resulting in a reduction in the slag–manganese sulfur partition ratio and desulfurization ratio. Moreover, with the accumulation of sulfur in slag and the oxidation of metallic manganese liquid, the slag showed a lower cleanliness and more oxidation, leading to an increase in sulfur and oxygen content in the electroslag ingot with the increase in ingot height.展开更多
The recycling rate of rejected electrolytic manganese metal(EMM)scrap can be increased by inhibiting the manganese metal(MM)vaporization during the remelting process with electroslag.However,if the latter is achieved ...The recycling rate of rejected electrolytic manganese metal(EMM)scrap can be increased by inhibiting the manganese metal(MM)vaporization during the remelting process with electroslag.However,if the latter is achieved by reducing the remelting temperature,the desulfurization behavior will deteriorate.Therefore,Na_(2)O-containing electroslag and metallic additive were used to increase the rejected EMM scrap recovery ratio.The respective high-temperature experiment was conducted in a MoSi_(2) electrical resistance furnace filled with fluid argon at 1673 K using five different types of electroslag with the Na_(2)O content ranging from 5.81%to 15.71%.High-purity metallic magnesium and magnesium calcium alloy additives were used as deoxidizers.The addition of Na_(2)O and metallic additives effectively promoted the desulfurization and deoxidization of MM.The removal of sulfur and oxygen by the interaction between Na_(2)O-containing electroslag melt and molten MM with metallic additive was analyzed from the thermodynamic and kinetic standpoints.The effect of Na_(2)O-containing electroslag volatilization on desulfurization and deoxidization was considered.With an increase in Na_(2)O content in the slag,the mass loss rates of Na_(2)O and electroslag rose,as well as the final sulfur partition ratio.If the Na_(2)O content volatilized in the slag melt did not exceed 10.44%,the sulfur removal ratio was increased by high sulfide capacity and CaO activity in all slags due to the addition of Na_(2)O.The rejected EMM scrap deoxidization ratio grew with the increased activity of CaO and reduced activity of Al_(2)O_(3) in the molten slag,caused by the increased Na_(2)O content in the molten slag.The addition of metallic Mg and Mg-Ca alloy indirectly promoted desulfurization and deoxidization by reducing the MnO content in the rejected EMM scrap and growing slag oxidability.The Mg-Ca alloy could also react with dissolved sulfur and oxygen,directly promoting desulfurization and deoxidization processes.The Na_(2)O content in slag should not exceed 10.44%to ensure the high desulfurization and deoxidization abilities,fluidity and low volatilization of slag.展开更多
基金support from the National Natural Science Foundation of China(Grant No.51804227).
文摘Remelting rejected electrolytic manganese metal (EMM) scrap was investigated by electroslag remelting (ESR) process through industrial experiment. The results indicated that the ANF-6 slag (70 wt.% CaF_(2) + 30 wt.% Al_(2)O_(3)) and deoxidizer could promote the desulfurization of ESR manganese in an air atmosphere. Under an air atmosphere, the sulfur in the ingot decreased to 0.0534 wt.% with a desulfurization ratio of ESR manganese of 53.2% by using ANF-6 slag and water-cooled copper electrode electroslag remelting rejected EMM scrap, suggesting its efficient removal. The electroslag ingots exhibited uneven chemical composition in an air atmosphere and cooling condition of the ESR process. The metal manganese could be oxidized by electroslag remelting of rejected EMM scrap in an air atmosphere with MnO content in the final slag of 21.9 wt.%. Besides, the activity of MnO in slag increased with increasing remelting temperature, resulting in a reduction in the slag–manganese sulfur partition ratio and desulfurization ratio. Moreover, with the accumulation of sulfur in slag and the oxidation of metallic manganese liquid, the slag showed a lower cleanliness and more oxidation, leading to an increase in sulfur and oxygen content in the electroslag ingot with the increase in ingot height.
基金The authors appreciate the financial support from the National Natural Science Foundation of China(Grant No.51804227).
文摘The recycling rate of rejected electrolytic manganese metal(EMM)scrap can be increased by inhibiting the manganese metal(MM)vaporization during the remelting process with electroslag.However,if the latter is achieved by reducing the remelting temperature,the desulfurization behavior will deteriorate.Therefore,Na_(2)O-containing electroslag and metallic additive were used to increase the rejected EMM scrap recovery ratio.The respective high-temperature experiment was conducted in a MoSi_(2) electrical resistance furnace filled with fluid argon at 1673 K using five different types of electroslag with the Na_(2)O content ranging from 5.81%to 15.71%.High-purity metallic magnesium and magnesium calcium alloy additives were used as deoxidizers.The addition of Na_(2)O and metallic additives effectively promoted the desulfurization and deoxidization of MM.The removal of sulfur and oxygen by the interaction between Na_(2)O-containing electroslag melt and molten MM with metallic additive was analyzed from the thermodynamic and kinetic standpoints.The effect of Na_(2)O-containing electroslag volatilization on desulfurization and deoxidization was considered.With an increase in Na_(2)O content in the slag,the mass loss rates of Na_(2)O and electroslag rose,as well as the final sulfur partition ratio.If the Na_(2)O content volatilized in the slag melt did not exceed 10.44%,the sulfur removal ratio was increased by high sulfide capacity and CaO activity in all slags due to the addition of Na_(2)O.The rejected EMM scrap deoxidization ratio grew with the increased activity of CaO and reduced activity of Al_(2)O_(3) in the molten slag,caused by the increased Na_(2)O content in the molten slag.The addition of metallic Mg and Mg-Ca alloy indirectly promoted desulfurization and deoxidization by reducing the MnO content in the rejected EMM scrap and growing slag oxidability.The Mg-Ca alloy could also react with dissolved sulfur and oxygen,directly promoting desulfurization and deoxidization processes.The Na_(2)O content in slag should not exceed 10.44%to ensure the high desulfurization and deoxidization abilities,fluidity and low volatilization of slag.
