End-group modulation of phenazine based non-fullerene acceptors for efficient organic solar cells with high open-circuit voltage

Phenazine-based non-fullerene acceptors(NFAs)have demonstrated great potential in improving the power conversion efficiency(PCE)of organic solar cells(OSCs).Halogenation is known to be an effective strategy for increasing optical absorption,refining energy levels,and improving molecular packing in organic semiconductors.Herein,a series of NFAs(Pz IC-4H,Pz IC-4F,Pz IC-4Cl,Pz IC-2Br)with phenazine as the central core and with/without halogen-substituted(dicyanomethylidene)-indan-1-one(IC)as the electron-accepting end group were synthesized,and the effect of end group matched phenazine central unit on the photovoltaic performance was systematically studied.Synergetic photophysical and morphological analyses revealed that the PM6:Pz IC-4F blend involves efficient exciton dissociation,higher charge collection and transfer rates,better crystallinity,and optimal phase separation.Therefore,OSCs based on PM6:Pz IC-4F as the active layer exhibited a PCE of 16.48%with an open circuit voltage(Voc)and energy loss of 0.880 V and 0.53 e V,respectively.Accordingly,this work demonstrated a promising approach by designing phenazine-based NFAs for achieving high-performance OSCs.

Inner alkyl chain modulation of small molecular acceptors enables molecular packing optimization and efficient organic solar cells

With the generation of Y6,organic solar cells have reached remarkable achievement of over 19%efficiency.Alkyl chain is of importance to modulate intermolecular stacking and possibly enhance optoelectronic properties of small molecule acceptors(SMAs).Three alkyl chains of 2-ethylhexyl,2-butylocyl and 3-ethylheptyl were selected to obtain G6-EH,G6-BO and G6-EHep molecules,respectively.Compared to G6-EH and G6-BO,G6-EHep was found inducing unfavourable large domain size.Furthermore,we discover that 2-butyloctyl effectively inhibits monomolecular and bimolecular recombination,improves molecular packing,generates more balanced carrier mobility and enhances exciton dissociation.The SMA with 2-butyloctyl alkyl chains(G6-BO)shows the best electrical and morphological characteristics,achieving a higher power conversion efficiency(PCE)of 17.06%,with an open circuit voltage of 0.912 V,a short-circuit current of 24.22 m A cm-2and a fill factor of 77.25%.Finally,using the ternary strategy by incorporating the G6-BO acceptor into PM6:BTP-e C9,we achieved a higher PCE of18.13%with enhanced electron transport.

High efficiency ternary organic solar cells enabled by compatible dual-donor strategy with planar conjugated structures

Ternary organic solar cells(OSCs) have received extensive attention for improving the power conversion efficiency(PCE) of organic photovoltaics(OPVs). In this work, a novel donor material(ECTBD) consisting of benzodithiophene(BDT) central electron donor unit was developed and synthesized. The small molecular donor has the same central unit as PM6. The addition of ECTBD into PM6:Y6 system could improve the morphology of active blend layer. In addition, ECTBD showed good morphologically compatibility when blending with PM6:Y6 host, resulting in the improvement of fill factor and current density. As a result, the ternary devices based on PM6:ECTBD:Y6 ternary system achieved a highest PCE of 16.51% with fill factor of 76.24%, which was much higher than that of the binary devices(15.7%). Overall, this work provided an effective strategy to fabricate highly efficient ternary organic solar cells through design of the novel small molecular donor as the third component.

Flexible ITO-free organic solar cells over 10% by employing drop-coated conductive PEDOT:PSS transparent anodes

Highly conductive poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonic acid)(PEDOT:PSS) has been explored to fabricate flexible and stretchable conductors. Generally, PEDOT:PSS transparent anodes are prepared by spin-coating method. In this article, we adopt a method by dropping PEDOT:PSS aqueous solution on the PET plastic substrate to fabricate flexible electrodes. Compared with spin coating, drop-coating is simple and cost-effective with large-area fabrications. Through this method, we fabricated highly transparent conductive electrodes and systematically studied their electrical, optical, morphological and mechanical properties. With dimethyl sulfoxide/methanesulfonic acid(DMSO/MSA) treated PEDOT:PSS electrode,bendable devices based on non-fullerene system displayed an open-circuit voltage of 0.925 V, a fill factor of 70.74%, and a high power conversion efficiency(PCE) of 10.23% under 100 mW cm^(-2) illumination, which retained over 80% of the initial PCE value after 1000 bending cycles. Based on the findings, drop-coated PEDOT:PSS electrodes exhibited high suitability for the development of large-area and high-efficiency printed solar cell modules in the future.

Efficient ternary organic solar cells based on a twin spiro-type non-fullerene acceptor

A novel small-molecule(SM) acceptor DTF-IC is designed and synthesized in this work. The power conversion efficiency(PCE) of ternary OSCs increased up to 12.14% from 10.90% by incorporating 10 wt% of DTF-IC as second acceptors into the binary OSCs consisting of PBDB-T as donor and IT-M as acceptor. This was mainly due to the large increase in short-circuit current(Jsc) from 16.18 to 17.95 mA/cm^2, without any drop in the open-circuit voltage(Voc) and fill factor(FF). The addition of DTF-IC enabled the donor and acceptor to form a distinct complementary absorption profile in the visible-light region, which boosted the photon harvesting in the range of 730–800 nm and consequently increased the Jscof the ternary system by 11%. Moreover, there was an energy transfer between the two SM acceptors, favorable for enhancing charge separation and transfer as well as reducing charge recombination at PBDB-T:IT-M and PBDB-T:DTF-IC interface. Simultaneously, HOMO and LUMO energy levels of DTF-IC were lower than those of PBDB-T, but still higher than those of IT-M. Thus, DTF-IC is able to provide a cascading energy level with the host donor and acceptor which are beneficial for efficient charge transfer between the acceptors and facilitating exciton dissociation and carrier transport. Meanwhile, the highly crystalline DTF-IC as a third component can improve the crystallization process of the active layer while maintaining proper phase separation. This work proposes a novel idea for non-fullerene acceptors achieved via twin spiro-type structure modifying by indanone and provides a new direction for the selection of ternary solar cell materials.