Environmentally assisted cracking resistance of Al-Cu-Li alloy AA2195 using slow strain rate test in 3.5% NaCl solution

The general corrosion and environmental cracking resistances of Al-Cu-Li alloy AA2195 were investigated in 3.5% NaCl environment and compared with those of another high strength alloy AA2219. The general corrosion resistance of these alloys was examined using immersion corrosion and potentiodynamic polarization tests, while the stress corrosion cracking （SCC） resistance was evaluated by slow strain rate test （SSRT） method. The tested samples were further characterized by SEM-EDS and optical profilometry to study the change in corrosion morphology, elemental content and depth of corrosion attack. The reduction in ductility was used as a parameter to evaluate the SCC susceptibility of the alloys. The results indicated that the corrosion resistance of AA2195 alloy was better than that of AA2219 alloy as it exhibited lower corrosion rate, along with lower pit depth and density. However, the SCC index （εNaCl/εair） measured was greater than 0.90, indicating good environmental cracking resistance of both the alloys. Detailed fractography of the failed samples under SEM？EDS, in general, revealed a typical ductile cracking morphology for both the alloys.

Exploring one material for dual applications:A red-emitting Mg_(2)GeO_(4):Eu^(3+)nanophosphor for future generation energy efficient WLEDs and dosimetric applications

The envisaged design and developme nt of individual mate rials to excavate a broader spectrum of desired properties and offer multiple applications are highly necessitating.Keeping this in mind,a series of forsterite-structured Mg_(2)GeO_(4):Eu^(3+)(1 mol%-9 mol%)nanophosphors was synthesized via a solution combustion method using oxalyl dihydrazide as a fuel.The X-ray diffraction patterns confirm the orthorhombic crystal system with a Puma space group.Morphological results clearly show irregularly shaped cluster-like structures with aggregation of the particles.Employing diffuse reflectance spectra,the optical energy band gap of the Mg_(2)GeO_(4):Eu^(3+)(1 mol%-9 mol%)nanophosphors was estimated and obtained to be~4.12-4.32 eV.The photoluminescence emission spectra exhibit intense peaks at^(5)79,589,610,661,and 707 nm,which are due to characteristic^(5)D_(0)→^(7)F_(0),^(5)D_(0)→^(7)F_(1),^(5)Do→^(7)F_(2),^(5)D_(0)→^(7)F_(3)and^(5)D_(0)→^(7)F_(4)transitions of Eu^(3+)ions,respectively.The Commission International de L'Eclairage color coordinates are gradually tuned from pale red(0.5980,0.4012)to a pure red(0.6385,0.3611)region.Thermoluminescence glow peaks showcase excellent super-linear response at low doses ofγ-irradiations,indicating that the prepared phosphor can be used in thermoluminescent personal dosimetry which is a biological tissue equivalent.The aforementioned results demonstrate that the prepared Mg_(2)GeO_(4):Eu^(3+)(1 mol%-9 mol%)nanophosphors are considered an excellent candidate for dual applications,i.e.,red component in future generation white-light-emitting diodes(WLEDs)and personal dosimetric applications.

Rapid visualization of latent fingerprints using novel CaSiO_3:Sm^(3+) nanophosphors fabricated via ultrasound route

Latent fingerprints (LFPs) were the most significant identification method for individualization. Most commonly available fingerprints (FPs) in crime spot investigation were latent and patent types. Generally,LFPs were invisible and thus the effective visualization technique necessitates for the analysis of such FPs. In the past years, many traditional visualization techniques have been employed, but suffered with low resolution, sensitivity, contrast and high background noise. To overcome such limitations, we synthesized Sm^(3+) doped CaSiO_3 nanophosphors (NPs) via an ultrasound irradiation route using mimosa pudica (m. p.)leaves extract as a bio-surfactant. The morphological behavior of the prepared samples was extensively studied by varying the concentration of the m. p. extract, ultrasound irradiation duration, pH level of the precursor solution and sonication power. The photoluminescence (PL) emission spectra exhibit characteristic peaks at～561,601 and 647 nm, which were attributed to^5G_(5/2)→~6H_J(J=5/2,7/2 and 9/2) transitions of Sm^(3+) ions.The Judd-Ofelt(J-O) intensity parameters and other radiative properties were estimated using PL data. The Commission International de I'Eclairage (CIE) color coordinates were positioned in orange-red region shows average correlated color temperature (CCT) value of～3576 K. The optimized samples can be used as a labeling agent for the visualization of LFPs on various porous and non-porous surfaces under normal light irradiation. The visualized FPs reveals well defined ridge characteristics, namely whorl, loop,arch, bifurcation, eye, island, bridge, sweat pores, etc, with high sensitivity, selectivity, low contrast and background hindrance. Aforementioned results evidence that the prepared CaSiO_3:Sm^(3+) NPs were promising luminescent materials for solid state lighting and forensic applications.

Rational design of monovalent ions （Li,Na,K） co-doped ZnAl2O4:Eu3+ nanocrystals enabling versatile robust latent fingerprint visualization

Alkali metal ions(M+ = Na+,Li+,K+) co-doped ZnAl2O4:Eu3+(5 mol%)(ZAE) nanopowders(NPs) were prepared via solution combustion route using Mimosa pudica(MP) leaves extract as a fuel. PXRD results of co-doped samples enhance the crystallinity and grain growth. Photoluminescence(PL) of the prepared ZAE and ZAE:M+(M+ = Na+, Li+, K+) NPs shows intense emission peaks in the range of 550-750 nm and ascribed to 5D0→7FJ(J=0-4) transitions of Eu3+ ions, respectively. A 2-fold enhancement in PL intensity was observed in Li+ co-doped samples. The optimized ZnAl2O4:Eu3+(5 mol%), Li+(1 wt%)(ZAEL)NPs were used to visualize LFPs on various porous, semi-porous and non-porous surfaces through robust powder dusting technique. The visualized latent fingerprints(LFPs) reveal well defined level 1-3 ridge characteristics under several tests such as fingerprint aging and fresh water treatment for various time durations. The obtained results clearly evidence that the prepared NPs are quite useful for multifunctional applications such as advanced forensic and solid state lightning.

Multifunctional Dy(Ⅲ)doped di-calcium silicate array for boosting display and forensic applications

Latent fingerprints（LFPs） are the major physical evidences for the identification of individuals during crime spot investigation. Till date, numerous methods were followed to visualize LFPs. However, simple,accurate, and cost-effective method has wide scope in advanced forensic field. In our work, Ca2 SiO4：Dy^（3＋）nanopowders（NPs） were fabricated via solution combustion route. The optimized sample was employed for the visualization of overlapped LFPs by the cost effective powder dusting method. The obtained results reveals the complete three levels of ridge characteristics with high sensitivity, reproducibility,selectivity, and reliability on various complex surfaces. The photoluminescence（PL） spectra consist of intense peaks at ～ 480 and 574 nm owing to ~4 F（9/2） →~6 H（15/2） and ~4 F（9/2）→~6 H（13/2） 4 f transitions of Dy3＋ ions,respectively. The photometric properties confirm that the samples exhibit intense white emission with high color purity. Therefore, the prepared NPs could be a definitive choice as an advanced luminescent NPs for forensic, solid state lighting and portable FED devices.