A study for further improving the suspension rate of alcohol-based coatings using a new nano-dispersing agent has been presented in this paper. The results of experiments show that the new nano-dispersing agent should...A study for further improving the suspension rate of alcohol-based coatings using a new nano-dispersing agent has been presented in this paper. The results of experiments show that the new nano-dispersing agent should be used in combination with organic auxiliary agent which significantly increases the suspension effect of alcohol-based coatings. By the methods, the suspension rates of 99%, 98%, 96% and 94% can be achieved at 2h, 2h, 48h and 72h, respectively. These alcohol-based coatings have characters of higher strength, lower gas evolution, better brush ability and no blister after ignition.展开更多
Dependence of the morphology of α(Al)-Mg2Si eutectic on the solidification velocity, and its orientation characteristics were investigated by thermoanalysis, directional solidification and electron diffraction techni...Dependence of the morphology of α(Al)-Mg2Si eutectic on the solidification velocity, and its orientation characteristics were investigated by thermoanalysis, directional solidification and electron diffraction techniques in this study.The eutectic morphology transformed from lamellae to rods with the increasing of the solidification velocity. Simultaneously, the orientation relationship changed from (100)Mg2Si/(100)Al;[110]Mg2si/[110]al to (011)Mg2si/(121)Al;[111]Mg2Si/[111]Al and (010)Mg2Si/(110)Al; [100]Mg2Si/[111]Al. Transformation of the eutectic morphology was related to the change of the preferred orientation of phase Mg2si.展开更多
文摘A study for further improving the suspension rate of alcohol-based coatings using a new nano-dispersing agent has been presented in this paper. The results of experiments show that the new nano-dispersing agent should be used in combination with organic auxiliary agent which significantly increases the suspension effect of alcohol-based coatings. By the methods, the suspension rates of 99%, 98%, 96% and 94% can be achieved at 2h, 2h, 48h and 72h, respectively. These alcohol-based coatings have characters of higher strength, lower gas evolution, better brush ability and no blister after ignition.
文摘Dependence of the morphology of α(Al)-Mg2Si eutectic on the solidification velocity, and its orientation characteristics were investigated by thermoanalysis, directional solidification and electron diffraction techniques in this study.The eutectic morphology transformed from lamellae to rods with the increasing of the solidification velocity. Simultaneously, the orientation relationship changed from (100)Mg2Si/(100)Al;[110]Mg2si/[110]al to (011)Mg2si/(121)Al;[111]Mg2Si/[111]Al and (010)Mg2Si/(110)Al; [100]Mg2Si/[111]Al. Transformation of the eutectic morphology was related to the change of the preferred orientation of phase Mg2si.