According to technological requirement of hot charge rolling and hot direct rolling,in this paper,we investigated the technology of the width control rolling in the rougher mills of hot strip continuous rolling mill t...According to technological requirement of hot charge rolling and hot direct rolling,in this paper,we investigated the technology of the width control rolling in the rougher mills of hot strip continuous rolling mill train.On the basis of improving width range of continuous casting of slab,we obtained a good result of greatly increasing the yield of slab→coil is achieved.展开更多
Continuous seismic observations can record seismic waveforms, and ambient noise, for the purposes of earthquake researches and other applications. Here we deploy three digital seismometers(EPS-2) in and around the Nan...Continuous seismic observations can record seismic waveforms, and ambient noise, for the purposes of earthquake researches and other applications. Here we deploy three digital seismometers(EPS-2) in and around the Nanwangshan Campus of the China University of Geosciences(Wuhan). This network was running from April 9 to May 9 of 2018. During this period, the seismometers recorded the May 4, 2018 M6.9 Hawaii earthquake. From the recorded waveforms, we could observe clearly the P and S arrivals, and the corresponding particle motions. Analysis of continuous observations of ambient noise shows obvious fluctuation of vibration intensity inside of the campus. The campus is quietest from 0 to 5 am. From 5 am on, the vibration intensity increases, and reaches the peak of entire day at 12 am. The amplitude then decreases to a very low level at 19:30 to 20:00 pm, and reaches another strong noisy time at 21:00 to 21:30 pm. After 21:30 pm, the intensity goes down slowly. We also observed seismic signals that were generated by the interaction of speed-control hump cars and ground. By taking the envelope and smooth operations, we observe different characteristics for different car speeds, which suggests that seismic monitoring approaches can be used for speed measurement of cars. This kind of small seismic network running in a real time fashion, would greatly help understanding of the sources of ambient noise at high frequency bands in interested areas. Analysis of a long-term observed dataset, and real time illustration will help to strengthen campus security and high-precision laboratory deployments, and also contribute to research atmosphere in earthquake science.展开更多
文摘According to technological requirement of hot charge rolling and hot direct rolling,in this paper,we investigated the technology of the width control rolling in the rougher mills of hot strip continuous rolling mill train.On the basis of improving width range of continuous casting of slab,we obtained a good result of greatly increasing the yield of slab→coil is achieved.
基金the National Key R&D Program of China(No.2018YFC0603500)Programme on Global Change and Air-Sea Interaction(No.GASI-GEOGE-02)+1 种基金NSFC(Nos.41474050,41874062)one of the outcomes of the research projects(No.Q20203004),analysis of campus ambient noise monitored by short-seismometers funded by Scientific Research Foundation of the Education Department of Hubei Province,China。
文摘Continuous seismic observations can record seismic waveforms, and ambient noise, for the purposes of earthquake researches and other applications. Here we deploy three digital seismometers(EPS-2) in and around the Nanwangshan Campus of the China University of Geosciences(Wuhan). This network was running from April 9 to May 9 of 2018. During this period, the seismometers recorded the May 4, 2018 M6.9 Hawaii earthquake. From the recorded waveforms, we could observe clearly the P and S arrivals, and the corresponding particle motions. Analysis of continuous observations of ambient noise shows obvious fluctuation of vibration intensity inside of the campus. The campus is quietest from 0 to 5 am. From 5 am on, the vibration intensity increases, and reaches the peak of entire day at 12 am. The amplitude then decreases to a very low level at 19:30 to 20:00 pm, and reaches another strong noisy time at 21:00 to 21:30 pm. After 21:30 pm, the intensity goes down slowly. We also observed seismic signals that were generated by the interaction of speed-control hump cars and ground. By taking the envelope and smooth operations, we observe different characteristics for different car speeds, which suggests that seismic monitoring approaches can be used for speed measurement of cars. This kind of small seismic network running in a real time fashion, would greatly help understanding of the sources of ambient noise at high frequency bands in interested areas. Analysis of a long-term observed dataset, and real time illustration will help to strengthen campus security and high-precision laboratory deployments, and also contribute to research atmosphere in earthquake science.
