【目的】棉花脱叶催熟是实现机械采收的前提。噻苯隆和乙烯利混用是我国目前主要的脱叶催熟方式。鉴于不同棉区的环境条件和种植模式差异较大,研究了不同棉区噻苯隆和乙烯利的适宜用量及配比。【方法】于2018年在黄河流域棉区的河北河...【目的】棉花脱叶催熟是实现机械采收的前提。噻苯隆和乙烯利混用是我国目前主要的脱叶催熟方式。鉴于不同棉区的环境条件和种植模式差异较大,研究了不同棉区噻苯隆和乙烯利的适宜用量及配比。【方法】于2018年在黄河流域棉区的河北河间、河北邯郸、山东德州和山东无棣、长江流域棉区的江苏大丰、北疆棉区的石河子Ⅰ和Ⅱ、南疆棉区的轮台和沙雅共9个地点开展田间试验,设50%(质量分数,下同)噻苯隆可湿性粉剂和40%乙烯利水剂3个混用处理,每公顷用量分别为450 g+1725 m L(T1)、600 g+3000 m L(T2)、600 g+4500 m L(T3),噻苯隆和乙烯利有效成分配比分别为1∶3、1∶4和1∶6,以喷施清水为对照。【结果】在江苏大丰,药后16 d各处理脱叶率与对照无显著差异。在其他8个试验点,大多数处理药后14 d的脱叶率显著高于对照,且自然脱叶率越低提高幅度越大;但噻苯隆和乙烯利不同用量及配比之间的脱叶率差异不一致,且大部分情况下差异不大。部分地点某些处理药后14~16 d的脱叶率可达到90%。不论药前吐絮率低或高,药剂处理14~16 d后,与清水对照相比吐絮率未表现出明显的增加;然而,药前吐絮率较低的试验点药后吐絮率增幅大,反之,吐絮率增幅小。噻苯隆和乙烯利混用对大部分试验点的产量和纤维品质无显著影响。【结论】药后14 d左右,噻苯隆和乙烯利混用的脱叶效果比较明显,不同剂量和配比之间无一致性和大的差异;催熟效果相对较差,对棉花产量和纤维品质影响不大。综合考虑脱叶催熟效果的稳定性和药剂成本,初步建议各棉区每公顷应用600 g的50%噻苯隆可湿性粉剂和3000 m L的40%乙烯利水剂进行脱叶催熟。展开更多
Background:An optimal N rate is one of the basic determinants for high cotton yield.The purpose of this study was to determine the optimal N rate on a new cotton cropping pattern with late-sowing,high density and onet...Background:An optimal N rate is one of the basic determinants for high cotton yield.The purpose of this study was to determine the optimal N rate on a new cotton cropping pattern with late-sowing,high density and onetime fertilization at the first flower period in Yangtze River Valley,China.A 2-year experiment was conducted in 2015 and 2016 with a randomized complete block design.The cotton growth process,yield,and biomass accumulation were examined.Results:The results showed that N rates had no effect on cotton growing progress or periods.Cotton yield was increased with N rates increasing from 120 to 180 kg·hm^−2,while the yield was not increased when the N rate was beyond 180 kg·hm−2,or even decreased(9∼29%).Cotton had the highest biomass at the N rate of 180 kg·hm^−2 is due to its highest accumulation speed during the fast accumulation period.Conclusions:The result suggests that the N rate for cotton could be reduced further to be 180 kg·hm^−2 under the new cropping pattern in the Yangtze River Valley,China.展开更多
文摘【目的】棉花脱叶催熟是实现机械采收的前提。噻苯隆和乙烯利混用是我国目前主要的脱叶催熟方式。鉴于不同棉区的环境条件和种植模式差异较大,研究了不同棉区噻苯隆和乙烯利的适宜用量及配比。【方法】于2018年在黄河流域棉区的河北河间、河北邯郸、山东德州和山东无棣、长江流域棉区的江苏大丰、北疆棉区的石河子Ⅰ和Ⅱ、南疆棉区的轮台和沙雅共9个地点开展田间试验,设50%(质量分数,下同)噻苯隆可湿性粉剂和40%乙烯利水剂3个混用处理,每公顷用量分别为450 g+1725 m L(T1)、600 g+3000 m L(T2)、600 g+4500 m L(T3),噻苯隆和乙烯利有效成分配比分别为1∶3、1∶4和1∶6,以喷施清水为对照。【结果】在江苏大丰,药后16 d各处理脱叶率与对照无显著差异。在其他8个试验点,大多数处理药后14 d的脱叶率显著高于对照,且自然脱叶率越低提高幅度越大;但噻苯隆和乙烯利不同用量及配比之间的脱叶率差异不一致,且大部分情况下差异不大。部分地点某些处理药后14~16 d的脱叶率可达到90%。不论药前吐絮率低或高,药剂处理14~16 d后,与清水对照相比吐絮率未表现出明显的增加;然而,药前吐絮率较低的试验点药后吐絮率增幅大,反之,吐絮率增幅小。噻苯隆和乙烯利混用对大部分试验点的产量和纤维品质无显著影响。【结论】药后14 d左右,噻苯隆和乙烯利混用的脱叶效果比较明显,不同剂量和配比之间无一致性和大的差异;催熟效果相对较差,对棉花产量和纤维品质影响不大。综合考虑脱叶催熟效果的稳定性和药剂成本,初步建议各棉区每公顷应用600 g的50%噻苯隆可湿性粉剂和3000 m L的40%乙烯利水剂进行脱叶催熟。
基金This project was supported by the National Natural Science Foundation of China(31271665).
文摘Background:An optimal N rate is one of the basic determinants for high cotton yield.The purpose of this study was to determine the optimal N rate on a new cotton cropping pattern with late-sowing,high density and onetime fertilization at the first flower period in Yangtze River Valley,China.A 2-year experiment was conducted in 2015 and 2016 with a randomized complete block design.The cotton growth process,yield,and biomass accumulation were examined.Results:The results showed that N rates had no effect on cotton growing progress or periods.Cotton yield was increased with N rates increasing from 120 to 180 kg·hm^−2,while the yield was not increased when the N rate was beyond 180 kg·hm−2,or even decreased(9∼29%).Cotton had the highest biomass at the N rate of 180 kg·hm^−2 is due to its highest accumulation speed during the fast accumulation period.Conclusions:The result suggests that the N rate for cotton could be reduced further to be 180 kg·hm^−2 under the new cropping pattern in the Yangtze River Valley,China.