期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Inconel 718合金冷拔丝材再结晶行为研究
1
作者 张东 南宏强 +3 位作者 孙文儒 杨艳 陈韩锋 王江 《金川科技》 2020年第1期37-40,52,共5页
本文对冷拔变形量为59%-75%的Inconel 718合金丝材开展不同退火工艺的研究,分析其组织的变化规律和再结晶行为。结果表明,冷变形量在59%和61%的丝材,在1020P以上方可完成完全再结晶,变形量达到75%的丝材,在980t即可完成完全再结晶。之后... 本文对冷拔变形量为59%-75%的Inconel 718合金丝材开展不同退火工艺的研究,分析其组织的变化规律和再结晶行为。结果表明,冷变形量在59%和61%的丝材,在1020P以上方可完成完全再结晶,变形量达到75%的丝材,在980t即可完成完全再结晶。之后,随着保温温度提高,晶粒发生长大。大的冷加工变形量促进丝材的再结晶,丝材的热处理工艺选择应充分考虑冷加工条件。 展开更多
关键词 INCONEL 718合金 丝材 冷拔 变形量 再结晶
原文传递
Effect of Direct Ageing Treatment on Stress-Rupture Properties of GH761 Alloy
2
作者 YANG Shu-lin sun wen-ru +3 位作者 LIU Fang GUO Shou-ren YANG Hong-cai HU Zhuang-qi 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2008年第3期61-64,共4页
The effect of direct ageing treatment on microstructure and stress-rupture properties of GH761 alloy was studied. Phosphorus was added to the tested alloy for its beneficial effect on stress-rupture life. It was found... The effect of direct ageing treatment on microstructure and stress-rupture properties of GH761 alloy was studied. Phosphorus was added to the tested alloy for its beneficial effect on stress-rupture life. It was found that the grain size of the tested alloy became much finer after direct ageing treatment, in comparison with the commercial GH761 alloy under standard heat treatment condition. The optimum direct ageing treatment has been determined as follows: 830 ℃ × 4 h, air cooling+ 720 ℃ × 24 h, air cooling. After such treatment, the higher stress-rupture prop- erties of the test alloy at 650 ℃, 690 MPa were obtained. The role of phosphorus is still effective under the condition of direct ageing treatment. 展开更多
关键词 direct ageing treatment GH761 mechanical property PRECIPITATE
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部