A review of the literature confirmed that the intrinsic corrosion rate of high-purity Mg as measured by weight-loss is 0.3mm/y in a concentrated chloride solution.Atmospheric corrosion of Mg alloys has produced corros...A review of the literature confirmed that the intrinsic corrosion rate of high-purity Mg as measured by weight-loss is 0.3mm/y in a concentrated chloride solution.Atmospheric corrosion of Mg alloys has produced corrosion rates of Mg-Al alloys an order of magnitude lower than the intrinsic corrosion rate of Mg in a concentrated chloride solution of 0.3 mm/y.The only successful strategy to produce a Mg alloy with a corrosion rate in a concentrated chloride solution substantially less than the intrinsic corrosion rate as measured by weight loss of Mg of 0.3 mm/y has been to improve the protectiveness of the corrosion product film.展开更多
A magnesium alloy containing essential,non-toxic,biodegradable elements such as Ca and Zn has been fabricated using a novel twin-roll casting process(TRC).Microstructure,mechanical properties,in vivo corrosion and bio...A magnesium alloy containing essential,non-toxic,biodegradable elements such as Ca and Zn has been fabricated using a novel twin-roll casting process(TRC).Microstructure,mechanical properties,in vivo corrosion and biocompatibility have been assessed and compared to the properties of the rare earth(RE)element containing WE43 alloy.TRC Mg-0.5 wt% Zn-0.5 wt% Ca exhibited fine grains with an average grain size ranging from 70 to 150μm.Mechanical properties of a TRC Mg-0.5Zn-0.5Ca alloy showed an ultimate tensile strength of 220 MPa and ductility of 9.3%.The TRC Mg-0.5Zn-0.5Ca alloy showed a degradation rate of 0.51±0.07 mm/y similar to that of the WE43 alloy(0.47±0.09 mm/y)in the rat model after 1 week of implantation.By week 4 the biodegradation rates of both alloys studied were lowered and stabilized with fewer gas pockets around the implant.The histological analysis shows that both WE43 and TRC Mg-0.5Zn-0.5Ca alloy triggered comparable tissue healing responses at respective times of implantation.The presence of more organized scarring tissue around the TRC Mg-0.5Zn-0.5Ca alloys suggests that the biodegradation of the RE-free alloy may be more conducive to the tissue proliferation and remodelling process.展开更多
基金This work was supported by the Australian Research Council Discovery Project DP 170102557。
文摘A review of the literature confirmed that the intrinsic corrosion rate of high-purity Mg as measured by weight-loss is 0.3mm/y in a concentrated chloride solution.Atmospheric corrosion of Mg alloys has produced corrosion rates of Mg-Al alloys an order of magnitude lower than the intrinsic corrosion rate of Mg in a concentrated chloride solution of 0.3 mm/y.The only successful strategy to produce a Mg alloy with a corrosion rate in a concentrated chloride solution substantially less than the intrinsic corrosion rate as measured by weight loss of Mg of 0.3 mm/y has been to improve the protectiveness of the corrosion product film.
基金supported by the Australian Federal Government through an Australian Government Research Training Program Scholarshipsupport of the Australian Research Council (ARC) (DP170102557 "Biodegradable magnesium alloy scaffolds for bone tissue engineering")support of the ARC Research Hub for Advanced Manufacturing of Medical Devices
基金the support of the Australian Research Council through the ARC Research Hub for Advanced Manufacturing of Medical Devices(IH150100024).
文摘A magnesium alloy containing essential,non-toxic,biodegradable elements such as Ca and Zn has been fabricated using a novel twin-roll casting process(TRC).Microstructure,mechanical properties,in vivo corrosion and biocompatibility have been assessed and compared to the properties of the rare earth(RE)element containing WE43 alloy.TRC Mg-0.5 wt% Zn-0.5 wt% Ca exhibited fine grains with an average grain size ranging from 70 to 150μm.Mechanical properties of a TRC Mg-0.5Zn-0.5Ca alloy showed an ultimate tensile strength of 220 MPa and ductility of 9.3%.The TRC Mg-0.5Zn-0.5Ca alloy showed a degradation rate of 0.51±0.07 mm/y similar to that of the WE43 alloy(0.47±0.09 mm/y)in the rat model after 1 week of implantation.By week 4 the biodegradation rates of both alloys studied were lowered and stabilized with fewer gas pockets around the implant.The histological analysis shows that both WE43 and TRC Mg-0.5Zn-0.5Ca alloy triggered comparable tissue healing responses at respective times of implantation.The presence of more organized scarring tissue around the TRC Mg-0.5Zn-0.5Ca alloys suggests that the biodegradation of the RE-free alloy may be more conducive to the tissue proliferation and remodelling process.
