The Fe−Ni−TiO_(2) nanocomposite coatings were electrodeposited by pulse frequency variation.The results showed that the nanocomposite with a very dense coating surface and a nanocrystalline structure was produced at h...The Fe−Ni−TiO_(2) nanocomposite coatings were electrodeposited by pulse frequency variation.The results showed that the nanocomposite with a very dense coating surface and a nanocrystalline structure was produced at higher frequencies.By increasing the pulse frequency from 10 to 500 Hz,the iron and TiO_(2) nanoparticles contents were increased in expense of nickel content.XRD patterns showed that by increasing the frequency to 500 Hz,an enhancement of BCC phase was observed and the grain size of deposits was reduced to 35 nm.The microhardness and the surface roughness were increased to 647 HV and 125 nm at 500 Hz due to the grain size reduction and higher incorporation of TiO_(2) nanoparticles into the Fe−Ni matrix(5.13 wt.%).Moreover,the friction coefficient and wear rate values were decreased by increasing the pulse frequency;while the saturation magnetization and coercivity values of the composite deposits were increased.展开更多
The nanocrystalline Fe-Ni-Cr coatings were electrodeposited by using the pulse current technique.The SEM results showed that the coatings had a mixed morphology of small nodules and fine cauliflower structures at low ...The nanocrystalline Fe-Ni-Cr coatings were electrodeposited by using the pulse current technique.The SEM results showed that the coatings had a mixed morphology of small nodules and fine cauliflower structures at low current densities.Also,the Cr content was increased at expense of Fe and Ni contents at high current densities.XRD patterns confirmed that the pulse current density had a positive effect on the grain refinement.The results of vibrating sample magnetometer(VSM)measurements demonstrated that by increasing the current density,the saturation magnetization was decreased and the coercivity was increased due to the enhancement of Cr content and the reduction of the grain size.The friction coefficient and wear rate values were decreased by increasing the pulse current density.Also,both the adhesive and abrasive wear mechanisms were observed on the worn surfaces.The abrasive grooves and the amount of wear debris were decreased by increasing the pulse current density.展开更多
文摘The Fe−Ni−TiO_(2) nanocomposite coatings were electrodeposited by pulse frequency variation.The results showed that the nanocomposite with a very dense coating surface and a nanocrystalline structure was produced at higher frequencies.By increasing the pulse frequency from 10 to 500 Hz,the iron and TiO_(2) nanoparticles contents were increased in expense of nickel content.XRD patterns showed that by increasing the frequency to 500 Hz,an enhancement of BCC phase was observed and the grain size of deposits was reduced to 35 nm.The microhardness and the surface roughness were increased to 647 HV and 125 nm at 500 Hz due to the grain size reduction and higher incorporation of TiO_(2) nanoparticles into the Fe−Ni matrix(5.13 wt.%).Moreover,the friction coefficient and wear rate values were decreased by increasing the pulse frequency;while the saturation magnetization and coercivity values of the composite deposits were increased.
文摘The nanocrystalline Fe-Ni-Cr coatings were electrodeposited by using the pulse current technique.The SEM results showed that the coatings had a mixed morphology of small nodules and fine cauliflower structures at low current densities.Also,the Cr content was increased at expense of Fe and Ni contents at high current densities.XRD patterns confirmed that the pulse current density had a positive effect on the grain refinement.The results of vibrating sample magnetometer(VSM)measurements demonstrated that by increasing the current density,the saturation magnetization was decreased and the coercivity was increased due to the enhancement of Cr content and the reduction of the grain size.The friction coefficient and wear rate values were decreased by increasing the pulse current density.Also,both the adhesive and abrasive wear mechanisms were observed on the worn surfaces.The abrasive grooves and the amount of wear debris were decreased by increasing the pulse current density.
