The variation of texture characteristics and activation of deformation mechanism in magnesium alloys can be achieved by addition of RE and Ca elements and subsequently affect the microstructure evolution during deform...The variation of texture characteristics and activation of deformation mechanism in magnesium alloys can be achieved by addition of RE and Ca elements and subsequently affect the microstructure evolution during deformation process.In this manuscript,the effects of loading direction and strain rate on mechanical properties,microstructural characteristics,texture evolution and deformation mechanism in TRC-ZA21 magnesium alloy sheet were investigated.Moreover,orientation dependence and strain rate sensitivity of deformation mechanism were also discussed.The results showed that evident difference in mechanical properties in TRC-ZA21 alloy exhibited by the changes in loading direction and strain rate.The variations in grain orientation and basal texture characteristic were attributed to the grain rotation behavior during the plastic deformation,dominated by deformation mechanism.Basal slip,extension twinning and prismatic slip played different contributions to plastic deformation behavior and presented orientation dependence and strain rate sensitivity.The activities of prismatic slip and extension twinning both enhance with increasing strain rate.The phenomenon of weakened effect of twinning and promoted role of prismatic slip was presented to coordinate strain compatibility during plastic deformation.展开更多
We introduce a non-equiatomic Fe_(61)Mn_(18)Si_(11)Cr_(10) medium entropy alloy designed by subjecting it to transformation-induced plasticity upon deformation at room temperature. Microstructure characterization carr...We introduce a non-equiatomic Fe_(61)Mn_(18)Si_(11)Cr_(10) medium entropy alloy designed by subjecting it to transformation-induced plasticity upon deformation at room temperature. Microstructure characterization carried out using scanning electron microscopy(SEM), electron backscatter diffraction(EBSD), transmission electron microscopy(TEM) and X-ray diffraction(XRD) shows a homogeneous solid solution FCC + BCC structured dual phase. Investigations on the deformation substructures at specific strain levels via EBSD reveal the deformation-induced transformations of γ→α′ and γ→ ε. The strengths, particularly yield strength, of the designed alloy are found to be higher than these of the well-studied five component FeMnNiCoCr system for the introduction of the hard phase( α′-martensite). When tensile tests are performed at different strain rates of 10^(–4)s^(-1), 10^(–3)s^(-1), 10^(–2)s^(-1), the tested material exhibits a slightly negative strain rate sensitivity and work hardening rate sensitivity.展开更多
基金supported by the China Postdoctoral Science Foundation(No.2021M700378)the Fundamental Research Funds for the Central Universities(No.2302020FRF-IC-20-10).
文摘The variation of texture characteristics and activation of deformation mechanism in magnesium alloys can be achieved by addition of RE and Ca elements and subsequently affect the microstructure evolution during deformation process.In this manuscript,the effects of loading direction and strain rate on mechanical properties,microstructural characteristics,texture evolution and deformation mechanism in TRC-ZA21 magnesium alloy sheet were investigated.Moreover,orientation dependence and strain rate sensitivity of deformation mechanism were also discussed.The results showed that evident difference in mechanical properties in TRC-ZA21 alloy exhibited by the changes in loading direction and strain rate.The variations in grain orientation and basal texture characteristic were attributed to the grain rotation behavior during the plastic deformation,dominated by deformation mechanism.Basal slip,extension twinning and prismatic slip played different contributions to plastic deformation behavior and presented orientation dependence and strain rate sensitivity.The activities of prismatic slip and extension twinning both enhance with increasing strain rate.The phenomenon of weakened effect of twinning and promoted role of prismatic slip was presented to coordinate strain compatibility during plastic deformation.
基金financially supported by the Fundamental Research Funds for the Central Universities (No. 2020MS058)。
文摘We introduce a non-equiatomic Fe_(61)Mn_(18)Si_(11)Cr_(10) medium entropy alloy designed by subjecting it to transformation-induced plasticity upon deformation at room temperature. Microstructure characterization carried out using scanning electron microscopy(SEM), electron backscatter diffraction(EBSD), transmission electron microscopy(TEM) and X-ray diffraction(XRD) shows a homogeneous solid solution FCC + BCC structured dual phase. Investigations on the deformation substructures at specific strain levels via EBSD reveal the deformation-induced transformations of γ→α′ and γ→ ε. The strengths, particularly yield strength, of the designed alloy are found to be higher than these of the well-studied five component FeMnNiCoCr system for the introduction of the hard phase( α′-martensite). When tensile tests are performed at different strain rates of 10^(–4)s^(-1), 10^(–3)s^(-1), 10^(–2)s^(-1), the tested material exhibits a slightly negative strain rate sensitivity and work hardening rate sensitivity.