Mechanical behavior analysis of high power commercial lithium-ion batteries

In application,lithium-ion cells undergo expansion during cycling.The mechanical behavior and the impact of external stress on lithium-ion battery are important in vehicle application.In this work,18 Ah high power commercial cell with Li Ni_(0.5)Co_(0.2)Mn_(0.3)O_(2)/graphite electrode were adopted.A commercial compress machine was applied to monitor the mechanical characteristics under different stage of charge(SOC),lifetime and initial external force.The dynamic and steady force was obtained and the results show that the dynamic force increases as the SOC increasing,obviously.During the lifetime with high power driving mode,different external force is shown to have a great impact on the long-term cell performance,with higher stresses result in higher capacity decay rates and faster impedance increases.A proper initial external force(900 N)provides lower impedance increasing.Postmortem analysis of the cells with2000 N initial force suggests a close correlation between electrochemistry and mechanics in which higher initial force leads to higher direct current internal resistance(DCIR)increase rate.In addition,for the cell with higher external force,deformation of the cathode and thicker solid electrolyte interface(SEI)film on the surface of anode and separator are observed.Porosity reduction and closure was also verified after cycles which is an obstacle to the lithium ion transferring.The largest cause of the observed capacity decline was the loss of active lithium through autopsy analysis.In addition,for the cell with higher external force,deformation of the cathode and thicker SEI film on the surface of anode and separator are observed.Porosity reduction and closure was also verified after cycles which is an obstacle to the lithium ion transferring.The largest cause of the observed capacity decline was the loss of active lithium through autopsy analysis.

The feasibility for natural graphite to replace artificial graphite in organic electrolyte with different film-forming additives

The feasibility for natural graphite(NG)to replace artificial graphite(AG)in organic electrolytes with different additives are investigated.Although the strong film-forming additives contributes to form robust solid electrolyte interphase(SEI)film on graphite particle surface,great differences in gas evolution,lithium inventory loss and other side reactions are observed.Lithium bis(oxalato)borate(Li BOB)and fluoroethylene carbonate(FEC)are found more effective and the combination shows to be more promising.In the optimized electrolyte,natural graphite anode exhibits excellent long-term cycling capability.After 800 cycles at high temperature,the capacity retention is comparable to that using artificial graphite.The mechanisms for the capacity-fading of the full cells with AG and NG anode are investigated by ICP,SEM and polarization studies.The results shows that NG electrode consumes more active lithium due to the rough surface and larger volume expansion.The rapid capacity-fading in the initial 100 cycles is related to the instability of the SEI film aroused from large volume expansion.The systematic analysis is inspiriting for the development of high performance lithium ion batteries with reduced cost.