A set of thermodynamic descriptions of the temary compounds （mainly α-CulnSe2, δ-CulnSe2, Culn3Se5 and CulnsSe8） in the Cu-In-Se system was established by adopting sub-lattice model. The model parameters are caref...A set of thermodynamic descriptions of the temary compounds （mainly α-CulnSe2, δ-CulnSe2, Culn3Se5 and CulnsSe8） in the Cu-In-Se system was established by adopting sub-lattice model. The model parameters are carefully evaluated by integrating the experimental data of thermodynamic properties, phase equilibrium and theoretical calculation of formation energies of different point defects. The evaluated Gibbs energies of the compounds reasonably agree with that estimated from EMF experiment and ab initio calculation. The calculated phase relationships in the Cu-In-Se system are in accord with the experimental phase diagrams. The obtained standard enthalpy of formation of CulnSe2 is close to that reported in the literatures.展开更多
The microstructure and mechanical properties of Ti-63 pancakes were investigated under different heat-treatment modes. Pancake No. 1, with an as-forged bimodal structure, was β annealed at 930℃ for l h. Its structur...The microstructure and mechanical properties of Ti-63 pancakes were investigated under different heat-treatment modes. Pancake No. 1, with an as-forged bimodal structure, was β annealed at 930℃ for l h. Its structure was changed to a Widmanstatten structure with continuous grain boundary α phase and long lamellar α phase. The pancake showed a good combination of strength, ductility and fracture toughness. Pancake No. 2, with an as-forged bimodal structure, was aged at 540℃for 8 h after annealing at 930℃ for 1 h. Other than the t＇me secondary α precipitates, it showed a similar microstructure to that of pancake No. 1. The fine precipitates can enhance the pancake＇s strength while reducing the ductility and fracture toughness. Pancake No. 3, with an as-forged basket-weave structure, was annealed at 750℃ for 1 h. Its structure was nearly unchanged and it achieved a better ductility but a slightly lower fracture toughness than pancake No. 1.展开更多
The electrolyte circulations in monopolar cell and two-compartment bipolar cell with submerged electrodes were described by a hydraulic model.The influence of current density,electrode tilt,anode-cathode distance(ACD)...The electrolyte circulations in monopolar cell and two-compartment bipolar cell with submerged electrodes were described by a hydraulic model.The influence of current density,electrode tilt,anode-cathode distance(ACD)and immersion depth of electrodes on the electrolyte circulation velocities between electrodes had been studied.Results demonstrated that the flow rates in the two compartments of bipolar cell were very different,which provided important information for the structure design of bipolar cell.展开更多
文摘A set of thermodynamic descriptions of the temary compounds （mainly α-CulnSe2, δ-CulnSe2, Culn3Se5 and CulnsSe8） in the Cu-In-Se system was established by adopting sub-lattice model. The model parameters are carefully evaluated by integrating the experimental data of thermodynamic properties, phase equilibrium and theoretical calculation of formation energies of different point defects. The evaluated Gibbs energies of the compounds reasonably agree with that estimated from EMF experiment and ab initio calculation. The calculated phase relationships in the Cu-In-Se system are in accord with the experimental phase diagrams. The obtained standard enthalpy of formation of CulnSe2 is close to that reported in the literatures.
文摘The microstructure and mechanical properties of Ti-63 pancakes were investigated under different heat-treatment modes. Pancake No. 1, with an as-forged bimodal structure, was β annealed at 930℃ for l h. Its structure was changed to a Widmanstatten structure with continuous grain boundary α phase and long lamellar α phase. The pancake showed a good combination of strength, ductility and fracture toughness. Pancake No. 2, with an as-forged bimodal structure, was aged at 540℃for 8 h after annealing at 930℃ for 1 h. Other than the t＇me secondary α precipitates, it showed a similar microstructure to that of pancake No. 1. The fine precipitates can enhance the pancake＇s strength while reducing the ductility and fracture toughness. Pancake No. 3, with an as-forged basket-weave structure, was annealed at 750℃ for 1 h. Its structure was nearly unchanged and it achieved a better ductility but a slightly lower fracture toughness than pancake No. 1.
文摘The electrolyte circulations in monopolar cell and two-compartment bipolar cell with submerged electrodes were described by a hydraulic model.The influence of current density,electrode tilt,anode-cathode distance(ACD)and immersion depth of electrodes on the electrolyte circulation velocities between electrodes had been studied.Results demonstrated that the flow rates in the two compartments of bipolar cell were very different,which provided important information for the structure design of bipolar cell.
