Research on recycling waste Printed Circuit Boards(PCB) is at the forefront of preventing environmental pollution and finding ways to recycle resources.The Tapered Column Separation Bed(TCSB) is invented aiming at dis...Research on recycling waste Printed Circuit Boards(PCB) is at the forefront of preventing environmental pollution and finding ways to recycle resources.The Tapered Column Separation Bed(TCSB) is invented aiming at disposing the problem that fine particles of waste printed circuit boards cannot be separated efficiently so as to obtain further insight about the underlying mechanisms and demonstrate the separation feasibility in the tapered column separation bed.In this work,a Computational Fluid Dynamics(CFD) coupled with Discrete Element Method(DEM) model for two-phase flow has been extended to simulate the fluid-solid flow in the tapered column separation bed.Its validity is demonstrated by its successful capturing the key features of particles' flow pattern,velocity,the pressure distribution,the axial position with time and axial force for particles with different densities.Simulation results show that the plastic particles and resin particles become overflow,while copper particles,iron particles and aluminum particles successively become underflow,with a discharge water flow rate of 1 m^3/h,an obliquity of 30°.The simulated results agree reasonably well with the experimental observation.Using this equipment to separate waste PCBs is feasible,theoretically.展开更多
Pressure fluctuations contribute to the instability of separation process in air dense medium fluidized bed, which provides a high motivation for further study of underlying mechanisms. Reasons for generation and prop...Pressure fluctuations contribute to the instability of separation process in air dense medium fluidized bed, which provides a high motivation for further study of underlying mechanisms. Reasons for generation and propagation of pressure fluctuations in the air dense medium fluidized bed have been discussed.Drift rate and collision rate of particles were employed to deduce the correlation between voidage and pressure fluctuations. Simultaneously, a dynamic pressure fluctuation measuring and analysis system was established. Based on frequency domain analysis and wavelet analysis, collected signals were disassembled and analyzed. Results show gradually intensive motion of particles increases magnitudes of signal components with lower frequencies. As a result of violent particle motion, the magnitude of real pressure signal's frequency experienced an increase as air velocity increased moderately. Wavelet analysis keeps edge features of the real signal and eliminates the noise efficaciously. The frequency of denoised signal is closed to that of pressure signal identified in frequency domain analysis.展开更多
Over the past decade extensive development of advanced high strength steel (AHSS) was driven by the demand from the automotive industry for stronger materials that can enable lightweighting to meet increasing fuel eff...Over the past decade extensive development of advanced high strength steel (AHSS) was driven by the demand from the automotive industry for stronger materials that can enable lightweighting to meet increasing fuel efficiency requirements. However, achievement of higher strength in many AHSS grades comes with reductions in ductility, leading to geometric constraints on formability and limiting their application. In this paper, a 3rd Generation AHSS with a compelling property combination of high tensile strength of ~1200 MPa and total elongation > 40% was used for laboratory and stamping studies. Various auto related laboratory tests were done including tensile testing, 180 degree bending, bulge testing, and cup drawing to estimate the steel’s formability under different applied conditions. Additionally, since laboratory testing provides only an estimation of the potential stamping response, the 3rd Generation AHSS sheet was stamped into B-pillars under industrial stamping conditions. Non-destructive and destructive analysis of the resulting stampings were done to evaluate the microstructural and property changes occurring during stamping. Significant strengthening of material in the stamped part is attributed to the structural changes through the complex Nanophase Refinement and Strengthening mechanism.展开更多
Based on the experiment of onset of nucleate boiling(ONB)in natural circulation and the nonequilibrium thermodynamics dissipative theory,the mechanism of ONB in narrow rectangle channels of natural circulation is prop...Based on the experiment of onset of nucleate boiling(ONB)in natural circulation and the nonequilibrium thermodynamics dissipative theory,the mechanism of ONB in narrow rectangle channels of natural circulation is proposed.It points out that the onset of nucleate boiling is influenced by the degree of superheat and the special conditions of narrow channels.Under the conditions of both density difference in natural circulation and narrow rectangle channels,the prediction model of ONB in natural circulation of narrow channels based on fluctuating is established.The experimental results show that the present model can be used to predict the heat flux of ONB in narrow rectangle channels.Features of ONB in natural circulation narrow rectangle channels are as follows:heating power is the incentive of the happen of ONB;the higher the heating power is,the higher the degree of superheat is,and the earlier the ONB will appear.With the pressurizing,the appearance of ONB will be delayed.The higher the degree of supercooling is,the later the ONB appears.The ONB will happen easier when there are noncondensable gases and roughness in the channels.展开更多
Objective:During the past three decades,laparoscopy has played a significant role in the management of urological disorders.This study aims to standardize the management of major vascular injury,which is a life-threat...Objective:During the past three decades,laparoscopy has played a significant role in the management of urological disorders.This study aims to standardize the management of major vascular injury,which is a life-threatening complication in the laparoscopic urological procedures.Methods:A total of 8210 patients with the urological disorder,who underwent laparoscopic surgery at Sir Run Run Shaw Hospital from January 2000 to December 2018,were included in this retrospective study.Patients’data of the laparoscopic major vascular injury were collected and analyzed,and the basic principles of the procedure were summarized.Results:A total of 15(0.18%)cases of major vascular injury were found among the 8210 patients,and 2 of them were converted to open surgery.Although the type of laparoscopic surgery,causes,and management of major vascular injury among the patients were diverse,the main management strategies of major vascular injury in laparoscopic surgery were to keep the vision clear,control bleeding rapidly by clamping and compression,make full preparation for possibly needed liquid resuscitation,and try best to repair under laparoscope.If necessary,converse to open surgery.Conclusion:Although the reported incidence of major vascular injury in laparoscopic urological surgery is extremely low,such injury can result in high morbidity and mortality.It is important to rapidly identify the cause and strictly follow the standardized management for better outcomes.展开更多
基金the National Natural Science Foundation of China(81672520,81870484,61975172,and 82001874,used for procurement of materials and labor cost)Science and Technology Planning Project of Zhejiang(2019C03089,used for procurement of materials)Zhejiang Provincial Natural Science Foundation of China(LR17F050001,used for procurement of materials).
基金the National Key Basic Research Program of China(No.2012CB214904)the National Natural Science Foundation of China for Innovative Research Group(No.51221462)+2 种基金the National Natural Science Foundation of China(Nos.51304196,51134022,and 51174203)the Natural Science Foundation of Jiangsu Province of China(No. BK2012136)the Specialized Research Fund for the Doctoral Program of Higher Education(No.20120095130001)
文摘Research on recycling waste Printed Circuit Boards(PCB) is at the forefront of preventing environmental pollution and finding ways to recycle resources.The Tapered Column Separation Bed(TCSB) is invented aiming at disposing the problem that fine particles of waste printed circuit boards cannot be separated efficiently so as to obtain further insight about the underlying mechanisms and demonstrate the separation feasibility in the tapered column separation bed.In this work,a Computational Fluid Dynamics(CFD) coupled with Discrete Element Method(DEM) model for two-phase flow has been extended to simulate the fluid-solid flow in the tapered column separation bed.Its validity is demonstrated by its successful capturing the key features of particles' flow pattern,velocity,the pressure distribution,the axial position with time and axial force for particles with different densities.Simulation results show that the plastic particles and resin particles become overflow,while copper particles,iron particles and aluminum particles successively become underflow,with a discharge water flow rate of 1 m^3/h,an obliquity of 30°.The simulated results agree reasonably well with the experimental observation.Using this equipment to separate waste PCBs is feasible,theoretically.
基金support by the Natural Science Foundation of Jiangsu Province of China (No. BK20160266)the National Natural Science Foundation of China (Nos. 51704287 and U1508210)the Priority Academic Program Development of Jiangsu Higher Education Institutions of China
文摘Pressure fluctuations contribute to the instability of separation process in air dense medium fluidized bed, which provides a high motivation for further study of underlying mechanisms. Reasons for generation and propagation of pressure fluctuations in the air dense medium fluidized bed have been discussed.Drift rate and collision rate of particles were employed to deduce the correlation between voidage and pressure fluctuations. Simultaneously, a dynamic pressure fluctuation measuring and analysis system was established. Based on frequency domain analysis and wavelet analysis, collected signals were disassembled and analyzed. Results show gradually intensive motion of particles increases magnitudes of signal components with lower frequencies. As a result of violent particle motion, the magnitude of real pressure signal's frequency experienced an increase as air velocity increased moderately. Wavelet analysis keeps edge features of the real signal and eliminates the noise efficaciously. The frequency of denoised signal is closed to that of pressure signal identified in frequency domain analysis.
文摘Over the past decade extensive development of advanced high strength steel (AHSS) was driven by the demand from the automotive industry for stronger materials that can enable lightweighting to meet increasing fuel efficiency requirements. However, achievement of higher strength in many AHSS grades comes with reductions in ductility, leading to geometric constraints on formability and limiting their application. In this paper, a 3rd Generation AHSS with a compelling property combination of high tensile strength of ~1200 MPa and total elongation > 40% was used for laboratory and stamping studies. Various auto related laboratory tests were done including tensile testing, 180 degree bending, bulge testing, and cup drawing to estimate the steel’s formability under different applied conditions. Additionally, since laboratory testing provides only an estimation of the potential stamping response, the 3rd Generation AHSS sheet was stamped into B-pillars under industrial stamping conditions. Non-destructive and destructive analysis of the resulting stampings were done to evaluate the microstructural and property changes occurring during stamping. Significant strengthening of material in the stamped part is attributed to the structural changes through the complex Nanophase Refinement and Strengthening mechanism.
基金Supported by National Natural Science Foundation of China(No.50976033)National Key Laboratory of Bubble Physics and Natural Circulation(No.9140C7 101030905)North China Electric Power University’s 211 Project
文摘Based on the experiment of onset of nucleate boiling(ONB)in natural circulation and the nonequilibrium thermodynamics dissipative theory,the mechanism of ONB in narrow rectangle channels of natural circulation is proposed.It points out that the onset of nucleate boiling is influenced by the degree of superheat and the special conditions of narrow channels.Under the conditions of both density difference in natural circulation and narrow rectangle channels,the prediction model of ONB in natural circulation of narrow channels based on fluctuating is established.The experimental results show that the present model can be used to predict the heat flux of ONB in narrow rectangle channels.Features of ONB in natural circulation narrow rectangle channels are as follows:heating power is the incentive of the happen of ONB;the higher the heating power is,the higher the degree of superheat is,and the earlier the ONB will appear.With the pressurizing,the appearance of ONB will be delayed.The higher the degree of supercooling is,the later the ONB appears.The ONB will happen easier when there are noncondensable gases and roughness in the channels.
文摘Objective:During the past three decades,laparoscopy has played a significant role in the management of urological disorders.This study aims to standardize the management of major vascular injury,which is a life-threatening complication in the laparoscopic urological procedures.Methods:A total of 8210 patients with the urological disorder,who underwent laparoscopic surgery at Sir Run Run Shaw Hospital from January 2000 to December 2018,were included in this retrospective study.Patients’data of the laparoscopic major vascular injury were collected and analyzed,and the basic principles of the procedure were summarized.Results:A total of 15(0.18%)cases of major vascular injury were found among the 8210 patients,and 2 of them were converted to open surgery.Although the type of laparoscopic surgery,causes,and management of major vascular injury among the patients were diverse,the main management strategies of major vascular injury in laparoscopic surgery were to keep the vision clear,control bleeding rapidly by clamping and compression,make full preparation for possibly needed liquid resuscitation,and try best to repair under laparoscope.If necessary,converse to open surgery.Conclusion:Although the reported incidence of major vascular injury in laparoscopic urological surgery is extremely low,such injury can result in high morbidity and mortality.It is important to rapidly identify the cause and strictly follow the standardized management for better outcomes.
