The Nb_(3)Sn thin film cavity,having the potential to be operated at a higher temperature and higher gradient compared to the cavity made from bulk niobium,is one of the most promising key technologies for the nextgen...The Nb_(3)Sn thin film cavity,having the potential to be operated at a higher temperature and higher gradient compared to the cavity made from bulk niobium,is one of the most promising key technologies for the nextgeneration radio-frequency superconducting accelerators.In our work,several 1.3 GHz single-cell TESLA-shaped Nb_(3)Sn thin film cavities,coated by the vapor diffusion method,were tested at Peking University and Institute of Modern Physics,Chinese Academy of Sciences.It was observed that the performance of the Nb_(3)Sn thin film cavities in the tests without the slow cooling down procedure and the effective magnetic field shielding was significantly improved by using a low temperature baking at 100℃for 48 hours.Although the peak electric field of the cavity remained unchanged,the rapid drop of the unloaded Q value(Q0)with the increasing accelerating field(Q-slope)was effectively eliminated,resulting in an improvement of the Q0 in the intermediate field region by~8 times.Furthermore,under better test conditions with the shielded magnetic field less than 5 mG and the slow cooling down procedure in the temperature range of 25-15 K,the Q0 was still improved by about 20%.Our study shows that the low temperature baking can be an effective supplement to the effective post-treatment for the Nb_(3)Sn thin film cavity.展开更多
Plasma-MIG hybrid arc welding is a hybrid heating source welding method which is composed of plasma arc and MIG arc. During Plasma-MIG hybrid arc welding process, the interface behavior of copper and steel dissimilar ...Plasma-MIG hybrid arc welding is a hybrid heating source welding method which is composed of plasma arc and MIG arc. During Plasma-MIG hybrid arc welding process, the interface behavior of copper and steel dissimilar alloy is investigated. The results show that electromagnetic stirring effect decreases and the heat input increases with the increase of outer plasma current in the hybrid arc welding process. The interface diffusion and interface thickness is controlled by the tradeoff of electromagnetic stirring effect degradation and heat input increase. The interface diffusion and interface thickness are controlled by decreasing the electromagnetic stirring force and increasing the heat input with the increase of plasma current in Cu/Fe plasma-MIG hybrid arc welding process.展开更多
基金Supported by the Youth Innovation Promotion Association of Chinese Academy of Sciences(Grant No.2020410)the Major Research Plan of National Natural Science Foundation of China(Grant No.91426303)+1 种基金the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB25000000)the National Postdoctoral Program for Innovative Talents(Grant No.BX201700257).
文摘The Nb_(3)Sn thin film cavity,having the potential to be operated at a higher temperature and higher gradient compared to the cavity made from bulk niobium,is one of the most promising key technologies for the nextgeneration radio-frequency superconducting accelerators.In our work,several 1.3 GHz single-cell TESLA-shaped Nb_(3)Sn thin film cavities,coated by the vapor diffusion method,were tested at Peking University and Institute of Modern Physics,Chinese Academy of Sciences.It was observed that the performance of the Nb_(3)Sn thin film cavities in the tests without the slow cooling down procedure and the effective magnetic field shielding was significantly improved by using a low temperature baking at 100℃for 48 hours.Although the peak electric field of the cavity remained unchanged,the rapid drop of the unloaded Q value(Q0)with the increasing accelerating field(Q-slope)was effectively eliminated,resulting in an improvement of the Q0 in the intermediate field region by~8 times.Furthermore,under better test conditions with the shielded magnetic field less than 5 mG and the slow cooling down procedure in the temperature range of 25-15 K,the Q0 was still improved by about 20%.Our study shows that the low temperature baking can be an effective supplement to the effective post-treatment for the Nb_(3)Sn thin film cavity.
基金financially supported by the National Natural Science Foundation of China (Nos. 50974046 and 50904020)Twelfth Five-year Aerospace Project of China
文摘Plasma-MIG hybrid arc welding is a hybrid heating source welding method which is composed of plasma arc and MIG arc. During Plasma-MIG hybrid arc welding process, the interface behavior of copper and steel dissimilar alloy is investigated. The results show that electromagnetic stirring effect decreases and the heat input increases with the increase of outer plasma current in the hybrid arc welding process. The interface diffusion and interface thickness is controlled by the tradeoff of electromagnetic stirring effect degradation and heat input increase. The interface diffusion and interface thickness are controlled by decreasing the electromagnetic stirring force and increasing the heat input with the increase of plasma current in Cu/Fe plasma-MIG hybrid arc welding process.
