期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
通过添加微量Mn元素激活非基面滑移提高镁合金塑性
1
作者 周世博 刘婷婷 +5 位作者 汤爱涛 时慧 敬学锐 彭鹏 章建跃 潘复生 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2024年第2期504-518,共15页
分析微量锰添加对镁合金显微组织和力学性能的影响。采用电子背散射技术、迹线分析、透射电镜和粘塑性自洽模拟等方法研究变形过程中的塑性变形机理。结果表明:Mn的加入使Mg−Mn合金的平均晶粒尺寸由28.30μm减小到5.10μm;同时,随着Mn... 分析微量锰添加对镁合金显微组织和力学性能的影响。采用电子背散射技术、迹线分析、透射电镜和粘塑性自洽模拟等方法研究变形过程中的塑性变形机理。结果表明:Mn的加入使Mg−Mn合金的平均晶粒尺寸由28.30μm减小到5.10μm;同时,随着Mn含量的增加,样品的断裂伸长率由14.33%提高到20.33%,屈服强度则由84 MPa提高到180 MPa。这种同时提高塑性和强度的原因是基面滑移和非基面滑移之间的临界剪切应力差从173 MPa减小到115 MPa,导致非基面滑移活动明显增加。通过微合金元素调整滑移系统差异为开发具有高强度和延展性的镁合金提供了一种途径。 展开更多
关键词 镁合金 显微组织演变 力学性能 塑性 变形机理
下载PDF
Initiation and evolution of coarse-grained deposits in the Late Quaternary Lake Chenghai source-to-sink system:From subaqueous colluvial apron(subaqueous fans)to Gilbert-type delta
2
作者 Dao-Tao Dong Long-Wei Qiu +7 位作者 Peng-Jie Ma Guo-Ding Yu Yu-Zhe Wang shi-bo zhou Bao-Liang Yang He-Qing Huang Yong-Qiang Yang Xin Li 《Journal of Palaeogeography》 SCIE CSCD 2022年第2期194-221,共28页
Investigating the formation and evolution of coarse-grained deposits in modern lakes and the relevant controlling conditions is indispensable to the prediction of reservoir sandbodies, disaster prediction,and limnolog... Investigating the formation and evolution of coarse-grained deposits in modern lakes and the relevant controlling conditions is indispensable to the prediction of reservoir sandbodies, disaster prediction,and limnological research. The source-to-sink system of coarse-grained deposits in Lake Chenghai, a deep,scarped Late Quaternary lake, was investigated in this study based on 62 outcrops, Advanced Land Observing Satellite(ALOS) digital elevation model(DEM) data, and regional geological survey data. The findings include the following:(1) the source areas of coarse-grained deposits in Lake Chenghai were lithologically classified into carbonate source areas, basaltic source areas and siliciclastic source areas, and were geomorphically categorized as scarp type or confluence type. Subaqueous colluvial aprons have formed downstream of the carbonate source areas and scarp-type basaltic source areas, while Gilbert-type deltas have formed downstream of siliciclastic source areas and confluence-type basaltic source areas.(2) The formation and evolution of coarse-grained deposits are controlled by the sediment flux that evolves in synchrony with the geomorphic evolution of the source areas and the sink regimes. Scarps represent the initial landform of the source areas.Source material rolls off or slides down scarps or forms small-scale debris flows before entering the lake. The source material initially formed subaqueous colluvial apron(synonymous with subaqueous fans) where sufficient space was present to accommodate sediments and the basement angle exceeded than the natural angle of repose. As weathering and denudation have progressed, the initial scarps have transformed into confluencetype slopes, and the source material has formed medium-and large-scale debris flows that have entered the lake, resulting in an increase in sediment flux. Consequently, the subaqueous colluvial aprons have rapidly grown and developed subaerial deposits, which have evolved into larger-scale Gilbert-type deltas that overlie the initial aprons.(3) The morphology and distribution of coarse-grained deposits vary in response to differences in quantity and composition of materials from different source areas, which resulting from different rates of weathering and denudation and different sediment input regimes. Firstly, the size and surface slope angle of a subaqueous colluvial apron from a carbonate source are smaller than those of a subaqueous colluvial apron of basaltic origin. Secondly, a Gilbert-type delta from a basaltic source features a greater slope angle and a thicker topset than does a Gilbert-type delta of siliciclastic origin, and the latter exhibits a longer foreset and a thicker bottomset than in the former. Thirdly, the sizes of subaqueous colluvial aprons are not strongly correlated with the sizes of the source areas, while the sizes of Gilbert-type deltas are. 展开更多
关键词 Coarse-grained deposits Gilbert-type delta Subaqueous colluvial apron Subaqueous fans SOURCE-TO-SINK Weathering and denudation Sediment input regime Lake Chenghai Quaternary
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部