An extended micromechanical-based plastic damage model for understanding water effects on quasi-brittle rocks

Water effects on the mechanical properties of rocks have been extensively investigated through experiments and numerical models.However,few studies have established a comprehensive link between the microscopic mechanisms of water-related micro-crack and the constitutive behaviors of rocks.In this work,we shall propose an extended micromechanical-based plastic damage model for understanding weakening effect induced by the presence of water between micro-crack’s surfaces on quasi-brittle rocks,based on the Mori-Tanaka homogenization and irreversible thermodynamics framework.Regarding the physical mechanism,water strengthens micro-crack propagation,which induces damage evolution during the pre-and post-stage,and weakens the elastic effective properties of rock matrix.After proposing a special calibration procedure for the determination of model parameters based on the laboratory compression tests,the proposed micromechanical-based model is verified by comparing the model predictions to the experimental results.The model effectively captures the mechanical behaviors of quasibrittle rocks subjected to the weakening effects of water.

Method for visualizing the shear process of rock joints using 3D laser scanning and 3D printing techniques

This study presents a visualized approach for tracking joint surface morphology.Three-dimensional laser scanning(3DLS)and 3D printing(3DP)techniques are adopted to record progressive failure during rock joint shearing.The 3DP resin is used to create transparent specimens to reproduce the surface morphology of a natural joint precisely.The freezing method is employed to enhance the mechanical properties of the 3DP specimens to reproduce the properties of hard rock more accurately.A video camera containing a charge-coupled device(CCD)camera is utilized to record the evolution of damaged area of joint surface during the direct shear test.The optimal shooting distance and shooting angle are recommended to be 800 mm and 40?,respectively.The images captured by the CCD camera are corrected to quantitatively describe the damaged area on the joint surface.Verification indicates that this method can accurately describe the total sheared areas at different shear stages.These findings may contribute to elucidating the shear behavior of rock joints.

Investigation on the Indeterminate Information of Rock Joint Roughness through a Neutrosophic Number Approach

To better estimate the rock joint shear strength,accurately determining the rock joint roughness coefficient(JRC)is the first step faced by researchers and engineers.However,there are incomplete,imprecise,and indeterminate problems during the process of calculating the JRC.This paper proposed to investigate the indeterminate information of rock joint roughness through a neutrosophic number approach and,based on this information,reported a method to capture the incomplete,uncertain,and imprecise information of the JRC in uncertain environments.The uncertainties in the JRC determination were investigated by the regression correlations based on commonly used statistical parameters,which demonstrated the drawbacks of traditional JRC regression correlations in handling the indeterminate information of the JRC.Moreover,the commonly used statistical parameters cannot reflect the roughness contribution differences of the asperities with various scales,which induces additional indeterminate information.A method based on the neutrosophic number(NN)and spectral analysis was proposed to capture the indeterminate information of the JRC.The proposed method was then applied to determine the JRC values for sandstone joint samples collected from a rock landslide.The comparison between the JRC results obtained by the proposed method and experimental results validated the effectiveness of the NN.Additionally,comparisons made between the spectral analysis and common statistical parameters based on the NN also demonstrated the advantage of spectral analysis.Thus,the NN and spectral analysis combined can effectively handle the indeterminate information in the rock joint roughness.

Aczel-Alsina Weighted Aggregation Operators of Simplified Neutrosophic Numbers and Its Application in Multiple Attribute Decision Making

The simplified neutrosophic number(SNN)can represent uncertain,imprecise,incomplete,and inconsistent information that exists in scientific,technological,and engineering fields.Hence,it is a useful tool for describing truth,falsity,and indeterminacy information in multiple attribute decision-making(MADM)problems.To suit decision makers’preference selection,the operational flexibility of aggregation operators shows its importance in dealing with the flexible decision-making problems in the SNN environment.To solve this problem,this paper develops the Aczel-Alsina aggregation operators of SNNs for MADM problems in view of the Aczel-Alsina operational flexibility.First,we define the Aczel-Alsina operations of SNNs.Then,the Aczel-Alsina aggregation operators of SNNs are presented based on the defined Aczel-Alsina operations of SNNs.Next,a MADM method is established using the proposed aggregation operators under the SNN environment.Lastly,an illustrative example about slope treatment scheme choices is provided to indicate the practicality and efficiency of the established method.By comparison with the existing relative MADM methods,the results show that the established MADM method can overcome the insufficiency of decision flexibility in the existing MADM methods and demonstrate the metric of flexible decision-making.

MCDM technique using single-valued neutrosophic trigonometric weighted aggregation operators

Motivated based on the trigonometric t-norm and t-conorm,the aims of this article are to present the trigonometric t-norm and t-conorm operational laws of SvNNs and then to propose the SvNN trigonometric weighted average and geometric aggregation operators for the modelling of a multiple criteria decision making(MCDM)technique in an inconsistent and indeterminate circumstance.To realize the aims,this paper first proposes the trigonometric t-norm and t-conorm operational laws of SvNNs,which contain the hybrid operations of the tangent and arctangent functions and the cotangent and inverse cotangent functions,and presents the SvNN trigonometric weighted average and geometric operators and their properties.Next,an MCDM technique is proposed in view of the presented two aggregation operators in the circumstance of SvNNs.In the end,an actual case of the choice issue of slope treatment schemes is provided to indicate the practicability and effectivity of the proposed MCDM technique.

Linguistic neutrosophic matrix energy and its application in multiple criteria group decision-making

Matrix energy is an important representation tool of collective information.Then,it is not applied to various fuzzy and linguistic environments.To compensate for this gap,this article aims to extend the matrix energy to propose the energy of a linguistic neutrosophic matrix(LNM)for solving a multiple criteria group decision-making(MCGDM)problem,which fully contains LNMs of decisionmaker weights,criteria weights,and alternative evaluations.To realize the objective,this study first presents the energy of LNM in view of the true matrix energy,the false matrix energy,and the indeterminate matrix energy.Then,a MCGDM technique is established in view of the LNM energy method in a LNM circumstance.Finally,the developed MCGDM technique using the LNM energy is used to solve the hospital location choice problem in the full LNM scenario.Meanwhile,the decision results indicate the validity and usability of the established MCGDM technique.

A photogrammetric approach for quantifying the evolution of rock joint void geometry under varying contact states

Accurate measurement of the evolution of rock joint void geometry is essential for comprehending the distribution characteristics of asperities responsible for shear and seepage behaviors.However,existing techniques often require specialized equipment and skilled operators,posing practical challenges.In this study,a cost-effective photogrammetric approach is proposed.Particularly,local coordinate systems are established to facilitate the alignment and precise quantification of the relative position between two halves of a rock joint.Push/pull tests are conducted on rock joints with varying roughness levels to induce different contact states.A high-precision laser scanner serves as a benchmark for evaluating the photogrammetry method.Despite certain deviations exist,the measured evolution of void geometry is generally consistent with the qualitative findings of previous studies.The photogrammetric measurements yield comparable accuracy to laser scanning,with maximum errors of 13.2%for aperture and 14.4%for void volume.Most joint matching coefficient(JMC)measurement errors are below 20%.Larger measurement errors occur primarily in highly mismatched rock joints with JMC values below 0.2,but even in cases where measurement errors exceed 80%,the maximum JMC error is only 0.0434.Thus,the proposed photogrammetric approach holds promise for widespread application in void geometry measurements in rock joints.

Orthopair indeterminate information expression,aggregations and multiattribute decision making method with indeterminate ranges

A neutrosophic number(NN)(d=μ+vI)can flexibly represent the indeterminate information corresponding to values/ranges of the indeterminacy I.Regarding the hybrid concept of intuitionistic fuzzy set(IFS)and NN,this study presents an orthopair indeterminate set(OIS),an orthopair indeterminate element weighted arithmetic averaging(OIEWAA)operator and an orthopair indeterminate element weighted geometric averaging(OIEWGA)operator to simplify and generalise the existing IFS and interval-valued IFS expressions and aggregation forms.Thus,a multiattribute decision making(DM)approach with indeterminate ranges of decision makers is developed based on the OIEWAA and OIEWGA operators and the score and accuracy functions of orthopair indeterminate elements in OIS setting.Finally,the proposed DM approach is applied to a multi-attribute DM example of manufacturing schemes(alternatives)in OIS setting to demonstrate the applicability and flexibility of the proposed DM approach in OIS setting.