通过诱导局域电场和电子局域化协同碱性析氢

碱性析氢反应(HER)可将间歇性可再生能源转化为可存储的清洁能源,因而备受关注.然而,水解离速度缓慢以及H中间体(*H)吸附和解吸困难限制了碱性HER的进一步发展.目前,针对碱性电解水解离缓慢问题,通常采用调整电催化剂结构降低水分解热动力学能垒,以及改变三相界面微环境加速中间产物的扩散等方法来促进水分解进行.此外,可以通过调控活性位点电子结构来优化*H的吸脱附.但是采用单一的策略很难同时促进H_(2)O的解离和*H的吸脱附,难以获得令人满意的碱性HER性能.因此,探索一种能同时促进H_(2)O的解离和*H的吸脱附协同策略对提升碱性HER的性能至关重要.本文提出了一种协同策略,通过构建高曲率二硫化钴纳米针(CoS_(2)NNs)和原子级铜(Cu)的掺杂分别实现诱导纳米尺度的局域电场和原子尺度的电子局域化,从而促进碱性HER的H_(2)O解离和*H吸脱附.首先,采用有限元法模拟和密度泛函理论计算,从理论上分别证实了纳米尺度局域电场可以加速H_(2)O解离以及原子尺度电子局域化可以促进*H吸附.受理论计算结果启发,通过一步水热法和原位硫化相结合的方法制备了高曲率的Cu掺杂CoS_(2)纳米针(Cu-CoS_(2)NNs).采用扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)和四探针测试等技术进行表征,研究了Cu-CoS_(2)NNs的形貌、物相结构、化学组成和导电性.结果表明,在Cu原子引入后,Cu-CoS_(2)NNs依然保持着高曲率的纳米针结构,证明了Cu在CoS_(2)NNs中的原子分散状态.相较于低曲率的Cu掺杂CoS_(2)纳米线(Cu-CoS_(2)NWs),Cu-CoS_(2)NNs只存在形貌上的区别,二者的化学组成和比例均非常接近.同时,上述材料都具有很强的导电性,且电导率基本相同,这与有限元模拟结果一致.原位衰减全反射红外光谱和电响应测试结果表明,Cu-CoS_(2)NNs具有较好的解离H_(2)O和吸附*H的能力.在1 mol L^(-1)KOH溶液和10 mA cm^(-2)电流密度下,该催化剂的析氢过电位仅为64 mV,展现出较好的电化学析氢性能.催化剂还表现出非常好的碱性析氢稳定性,在标准氢电势(RHE)-0.18 V下,可在100 mA cm^(-2)电流密度下稳定工作达100 h.综上所述,本文通过诱导局域电场和电子局域化构建了一种协同策略,所制备的Cu-CoS_(2)NNs表现出很好的催化碱性HER性能和应用前景,为碱性HER电催化剂的理性设计提供了一定的参考.

Recent progress in fluorinated electrolytes for improving the performance of Li–S batteries

Lithium–sulfur(Li–S) batteries represent a "beyond Li-ion" technology with low cost and high theoretical energy density and should fulfill the ever-growing requirements of electric vehicles and stationary energy storage systems. However, the sulfur-based conversion reaction in conventional liquid electrolytes results in issues like the so-called shuttle effect of polysulfides and lithium dendrite growth, which deteriorate the electrochemical performance and safety of Li–S batteries. Optimization of conventional organic solvents(including ether and carbonate) by fluorination to form fluorinated electrolytes is a promising strategy for the practical application of Li–S batteries. The fluorinated electrolytes, owing to the high electronegativity of fluorine, possesses attractive physicochemical properties, including low melting point,high flash point, and low solubility of lithium polysulfide, and can form a compact and stable solid electrolyte interphase(SEI) with the lithium metal anode. Herein, we review recent advancements in the development of fluorinated electrolytes for use in Li–S batteries. The effect of solvent molecular structure on the performance of Li–S batteries and the formation mechanism of SEI on the cathode and anode sides are analyzed and discussed in detail. The remaining challenges and future perspectives of fluorinated electrolytes for Li–S batteries are also presented.

An overview of the characteristics of advanced binders for high-performance Li–S batteries

The lithium-sulfur battery(Li–S)is a promising energy storage system with many advantages over the commercialized lithium-ion battery.It has a high theoretical capacity of 1675 mAh gà1,a high theoretical energy density(2600 Wh kgà1),and is eco-environmentally friendly.Although only a small amount is used(<10 wt%)in the electrode,binders may affect the discharge capacity and cycling stability of sulfur cathodes in the Li–S battery.In recent years,tremendous efforts have been made to develop functional binders with robust adhesive strength,fast ion/electron transportation,strong anchoring of lithium polysulfide(LiPS),and rapid redox kinetics,to improve capacity,coulombic efficiency,and energy density.This article reviews recent developments in binders for the Li–S battery.After briefly introducing the fundamentals of the Li–S battery,the desireable characteristics of binders are discussed based on the correlation between the functions of the binder molecules and the performance of the battery.Future challenges in developing promising binders and potential solutions are provided in the conclusion.

Supported ionic liquid phase-boosted highly active and durable electrocatalysts towards hydrogen evolution reaction in acidic electrolyte

Platinum is generally known as the most effective electrocatalyst for hydrogen evolution reaction because it can greatly lower the overpotential and accelerate the reaction kinetics,while its commercial potential always suffers from scarcity,high cost,low utilization,and poor durability particularly in acidic electrolytes.We herein demonstrate a facile method to improve the hydrogen evolution performance of Pt-based electrocatalysts by simply decorating the-state-of-the-art and commercially available Pt/C with hydrophobic protic([DBU][NTf2])or aprotic([BMIm][NTf2])ionic liquid.The current densities of[BMIm]@Pt/C and[DBU-H]@Pt/C with 10% ionic liquid at an overpotential of 40 mV are 2.81 and 4.15 times,respectively,higher than that of the pristine Pt/C.More importantly,ionic liquid-decoration significantly improves the long-term stability of Pt nanoparticles.After 8 h of chronoamperometric measurements,[DBU-H]@Pt/C and[BMIm]@Pt/C can still retain 83.7% and 78.3% of their original activity,respectively,which is much higher than that of the pristine Pt/C(24.4%).The improved performance of Pt/C decorated with ionic liquid is considered to arise from the improved proton conductivity(particularly for protic ionic liquid)and hydrophobic microenvironment created by the supported ionic liquid phase.The presence of ionic liquid layer not only de-coordinates H+from hydronium ions nearby the Pt nanoparticles,but it also protects Pt nanoparticles from dissolution in the acidic media.

Free-standing phosphorous-doped molybdenum nitride in 3D carbon nanosheet towards hydrogen evolution at all pH values

Highly efficient electrocatalysts towards hydrogen evolution reaction(HER) with large current density at all-pH values are critical for the sustainable hydrogen production. Herein, we report a free-standing HER electrode, phosphorous-doped molybdenum nitride nanoparticles embedded in 3-dimentional carbon nanosheet matrix(P-Mo2N-CNS) fabricated via one-step carbonization and in-situ formation. The asprepared catalyst shows free-standing architecture with interconnected porous microstructure. P-doped Mo2N nanoparticles with an average diameter of 4.4 nm are well embedded in the 3-dimentional vertical carbon nanosheets matrix. Remarkable electrocatalytic HER performance is observed in alkaline, neutral and acidic media at large current densities. The overpotential of P-Mo2N-CNS to drive a current density of 100 mA cm-2 in 0.5 M H2SO4 and 1.0 M PBS is only 181 and 221 mV, respectively. In particular, the current density reaches up to 1000 mA cm-2 at a low overpotential of 256 mV in 1.0 M KOH, much better than that of the commercial Pt/C catalyst. Density functional theory calculations suggest the optimized H sorption kinetics on Mo2N after P doping, elucidating the superior activity.

Semi-closed synthesis of nitrogen and oxygen Co-doped mesoporous carbon for selective aqueous oxidation

Heteroatom-doped meso/micro-porous carbon materials are conventionally produced by harsh carbonization under an inert atmosphere involving specific precursors,hard/soft templates,and heteroatom-containing agents.Herein,we report a facile synthesis of N and O co-doped meso/micro-porous carbon(NOMC)by template-free carbonization of a small-molecule precursor in a semi-closed system.The semi-closed carbonizaiton process yields hydrophilic NOMCs with large surface area in a high yield.The porous structure as well as the elemental composition of NOMCs can be modulated by changing the holding time at a particular temperature.NOMCs as metal-free heterogeneous catalysts can selectively oxidize benzyl alcohol and its derivatives into aldehydes/ketones with>85%conversion in aqueous solution,which is much higher than that of the control sample obtained in tube furnace(21%conversion),mainly due to their high N content,high percentage of pyridinic N,and large surface area.The presence of O-containing moieties also helps to improve the hydrophilicity and dispersion ability of catalysts and thus facilitates the mass transfer process during aqueous oxidation.The NOMC catalysts also dispayed excellent activity for a wide range of substrates with a selectivity of>99%.

Monoclinic Cu_(3)(OH)_(2)V_(2)O_(7)·2H_(2)O nanobelts/reduced graphene oxide:A novel high-capacity and long-life composite for potassium-ion battery anodes

Developing suitable anode materials for potassium-ion batteries(PIBs)remains a great challenge owing to the limited theoretical capacity of active materials and large radius of K+ion(1.38?).To solve these obstacles,by integrating the principles of multielectron transfer and rational porous crystal framework,we creatively propose the monoclinic Cu_(3)(OH)_(2)V_(2)O_(7)·2H_(2)O(CVO)as a novel anode for PIBs.Furthermore,inspired by the metastable nature of CVO under high temperature/pressure,we skillfully design a facile hydrothermal recrystallization strategy without the phase change and surfactants addition.Thus,for the first time,the porous composite of Cu_(3)(OH)_(2)V_(2)O_(7)·2H_(2)O nanobelts covered in situ by reduced graphene oxide(CVO NBs/r GO)was assembled,greatly improving the deficiencies of CVO.When used as a novel anode for PIBs,CVO NBs/r GO delivers large specific capacity(up to 551.4 m Ah g^(-1)at 50 m A g^(-1)),high-rate capability(215.3 m Ah g^(-1)at 2.5 A g^(-1))and super durability(203.6 m Ah g^(-1)at 500 m A g^(-1)even after 1000 cycles).The outstanding performance can be ascribed to the synergistic merits of desirable structural features of monoclinic CVO nanobelts and the highly conductive graphene 3D network,thus promoting the composite material stability and electrical/ionic conductivity.This work reveals a novel metal vanadate-based anode material for PIBs,would further motivate the subsequent batteries research on M_(3)(OH)_(2)V_(2)O_(7)-n H_(2)O(M;Co,Ni,Cu,Zn),and ultimately expands valuable fundamental understanding on designing other high-performance electrode materials,including the combined strategies of multielectron transfer with rational porous crystal framework,and the composite fabrication of 1D electrode nanostructure with conductive carbon matrix.

Building a PEG-C@MoSe_(2)@CNT heterostructure via in-situ selenidation as highly reversible anodes for Na+batteries

Herein,we describe a simple and efficient method to build C@MoSe_(2)@CNT composites that exhibit good electrochemical performance as anode materials for sodium-ion batteries.The protocol uses commercially available and cheap carbon nanotubes(CNT)as the conductive network.Molybdenum selenide(MoSe_(2)),in-situ-synthesized from Mo-ethylene glycol(poly(ethylene glycol)(PEG,M_(n)≈200))complexes,grows along the CNT with a discontinuous morphology,which creates multiple channels for the insertion of Na^(+).Meanwhile,PEG-C provides a thin carbon coating layer to increase stability.For PEG-200-2-C/MoSe_(2)/CNTat room temperature,the storage at 2 A g^(-1)is 426 m A h g^(-1)after 500 cycles and 212 m A h g^(-1)after 3,000 cycles.Compared with pure MoSe_(2),density functional theory calculations indicate that the Na^(+)diffusion barrier in the MoSe_(2)of C@MoSe_(2)@CNT effectively decreases from 0.91 to 0.72 e V,hence promoting the reversibility of the Na^(+)storage.

含能五唑化钴衍生钴修饰氮掺杂碳材料的制备及其催化氧还原反应性能研究（英文）

自首例含有五唑阴离子(cyclo-N5^-)的稳定固态聚氮化合物被报道以来,探索新兴五唑化合物的制备与应用吸引着科学家们的极大兴趣.本文发展了一种以五唑化钻与含能聚离子液体为前驱体,利用独特的爆燃反应制备钴修饰氮掺杂碳材料的新方法.凭借前驱体的含能特性,所得材料具有典型的核-壳纳米结构,氮掺杂碳层包裹的钴纳米颗粒分布均匀.材料5%Co(N5)^2-EPIL-900在氧还原反应中展现出优异的电催化性能、稳定性和抗甲醇毒化能力.本工作为以含能五唑化合物为前驱体高效制备功能碳材料提供了新途径.