期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
The extraction of aromatics using N-methylpyrrolidone: Liquid-liquidequilibrium determination and mechanism exploration
1
作者 Yanjing Li shilong dong +3 位作者 Lili Wang Xiaoyan Sun Wenying Zhao Shuguang Xiang 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2023年第12期117-127,共11页
LLE data of cyclooctane/3-methylpentane + benzene/toluene + N-methylpyrrolidone (NMP) at 298.15 Kand 313.15 K under a pressure of 101.3 kPa were measured in this work. The Othmer-Tobias and Handequations were adopted ... LLE data of cyclooctane/3-methylpentane + benzene/toluene + N-methylpyrrolidone (NMP) at 298.15 Kand 313.15 K under a pressure of 101.3 kPa were measured in this work. The Othmer-Tobias and Handequations were adopted to validate the reliability of LLE data, where the correlation coefficients (R2) wereclose to unity, indicating the high reliability of the experimental data. The experimental data were analyzed using the distribution coefficient (D) and separation factor (S), and the effect of NMP extracting benzene and toluene from aromatics was explored. Meanwhile, the reason for the different extractionefficiencies of benzene and toluene using NMP was analyzed by quantum chemical calculations. TheNRTL and UNIQUAC thermodynamic models were used to correlate the liquid–liquid equilibrium data,and the relevant binary interaction parameters were obtained. The calculated root mean square deviation(RMSD) were all less than 0.0063, indicating that the obtained binary interaction parameters can be usedto simulate and calculate the extraction of aromatics using NMP. 展开更多
关键词 EXTRACTION Liquid-liquid equilibrium Thermodynamic models Quantum chemistry calculation
下载PDF
具有力学增强及抗冲击性能的光固化自褶皱涂层
2
作者 李瑾 张晓亮 +7 位作者 苏志龙 李甜甜 王泽鸿 董仕龙 徐凡 马晓东 印杰 姜学松 《Science Bulletin》 SCIE EI CAS CSCD 2023年第19期2200-2209,M0004,共11页
表面聚合物涂层作为保护层广泛应用于表面防腐、防渗透和抗冲击等各种领域,如何在已有材料体系和工艺条件下提高涂层机械力学性能,是一个重要但具有挑战性的问题.受自下而上的制造工艺和生物体的层级结构的能量耗散机制的启发,本文开发... 表面聚合物涂层作为保护层广泛应用于表面防腐、防渗透和抗冲击等各种领域,如何在已有材料体系和工艺条件下提高涂层机械力学性能,是一个重要但具有挑战性的问题.受自下而上的制造工艺和生物体的层级结构的能量耗散机制的启发,本文开发了一种具有自褶皱表面形态和梯度交联结构的光固化涂层.理论模拟和实验结果表明,表面自褶皱的独特形貌和体系内梯度交联结构有助于提升涂层的力学性能及抗冲击性.这种光固化自褶皱涂层为设计功能抗冲击聚合物涂层材料开辟了新的途径. 展开更多
关键词 聚合物涂层 机械力学性能 交联结构 光固化 抗冲击性 防渗透 表面形态 制造工艺
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部