Recycled PET (R-PET) is well known to exhibit brittle behavior in the presence of notches and indicated the low heat distortion temperature. In addition, it is hard to prevent some impurities such as cap or label of t...Recycled PET (R-PET) is well known to exhibit brittle behavior in the presence of notches and indicated the low heat distortion temperature. In addition, it is hard to prevent some impurities such as cap or label of the bottle that mixed into R-PET during the recycling process. In this paper, the effect of the amounts and kinds of compatibilizers on the morphological characteristics and mechanical performance of recycled poly(ethylene terephthalate) (R-PET) compounded with polyethylene (PE), polypropylene (PP), and polystyrene (PS) was investigated. From the results, with an increase in the glycidyl methacrylate modified PE (EGMA) additive contents, in the increment of the Izod impact strength of Composite-G was obtained. In addition, it was found that the miscibility of Composite-G was improved with increasing the amount of EGMA, which indicated from the result of SEM images.展开更多
The fusion strength of electrofusion joints using the polyethylene (PE) pipe connection greatly depends on the amount of sand which adheres to the interface by wind and so on, because there is no flow of melted resin ...The fusion strength of electrofusion joints using the polyethylene (PE) pipe connection greatly depends on the amount of sand which adheres to the interface by wind and so on, because there is no flow of melted resin at the fusion interface on electrofusion joints. Therefore, it is necessary to develop a method to prevent the fusion strength from reducing even in the case of sand adhesion. In this study, the fusion interface coated with polysilane, a kind of silicon polymer, effectively prevented the reduction of the fusion strength even if contaminated by sand. It was found that it brought the improvement of the fusion strength since when there was polysilane on the fusion interface. PS deeply permeated the polyethylene layer and lowered the viscosity of polyethylene.展开更多
文摘Recycled PET (R-PET) is well known to exhibit brittle behavior in the presence of notches and indicated the low heat distortion temperature. In addition, it is hard to prevent some impurities such as cap or label of the bottle that mixed into R-PET during the recycling process. In this paper, the effect of the amounts and kinds of compatibilizers on the morphological characteristics and mechanical performance of recycled poly(ethylene terephthalate) (R-PET) compounded with polyethylene (PE), polypropylene (PP), and polystyrene (PS) was investigated. From the results, with an increase in the glycidyl methacrylate modified PE (EGMA) additive contents, in the increment of the Izod impact strength of Composite-G was obtained. In addition, it was found that the miscibility of Composite-G was improved with increasing the amount of EGMA, which indicated from the result of SEM images.
文摘The fusion strength of electrofusion joints using the polyethylene (PE) pipe connection greatly depends on the amount of sand which adheres to the interface by wind and so on, because there is no flow of melted resin at the fusion interface on electrofusion joints. Therefore, it is necessary to develop a method to prevent the fusion strength from reducing even in the case of sand adhesion. In this study, the fusion interface coated with polysilane, a kind of silicon polymer, effectively prevented the reduction of the fusion strength even if contaminated by sand. It was found that it brought the improvement of the fusion strength since when there was polysilane on the fusion interface. PS deeply permeated the polyethylene layer and lowered the viscosity of polyethylene.