Stable multi-electron reaction stimulated by W doping VS_(4)for enhancing magnesium storage performance

Rechargeable magnesium batteries(RMBs)hold promise for offering higher volumetric energy density and safety features,attracting increasing research interest as the next post lithium-ion batteries.Developing high performance cathode material by inducing multi-electron reaction process as well as maintaining structural stability is the key to the development and application of RMBs.Herein,multielectron reaction occurred in VS_(4)by simple W doping strategy.W doping induces valence of partial V as V^(2+)and V^(3+)in VS_(4)structure,and then stimulates electrochemical reaction involving multi-electrons in 0.5%W-V-S.The flower-like microsphere morphology as well as rich S vacancies is also modulated by W doping to neutralize structure change in such multi-electron reaction process.The fabricated 0.5%W-V-S delivers higher specific capacity(149.3 m A h g^(-1)at 50 m A g^(-1),which is 1.6 times higher than that of VS_(4)),superior rate capability(76 mA h g^(-1)at 1000 mA g^(-1)),and stable cycling performance(1500cycles with capacity retention ratio of 93.8%).Besides that,pesudocapaticance-like contribution analysis as well as galvanostatic intermittent titration technique(GITT)further confirms the enhanced Mg^(2+)storage kinetics during such multi-electron involved electrochemical reaction process.Such discovery provides new insights into the designing of multi-electron reaction process in cathode as well as neutralizing structural change during such reaction for realizing superior electrochemical performance in energy storage devices.

Multidimensional defects tailoring local electron and Mg^(2+) diffusion channels for boosting magnesium storage performance of WO_(3)/MoO_(2)

Defect engineering presents great promise in addressing lower specific capacity,sluggish diffusion kinetics and poor cycling life issues in energy storage devices.Herein,multidimensional(0D/2D/3D) structural defects are constructed in WO_(3)/MoO_(2) simultaneously via competing for and sharing with O atoms during simple hydrothermal process.OD and 2D defects tailor local electron,activating more sites and generating built-in electric fields to yield ion reservoir,meanwhile,3D defect owning lower anisotropic property tailors Mg^(2+) diffusion channels to fully exploit Mg^(2+) adsorbed sites induced by OD and 2D defects,enhance the kinetics and maintain structural stability.Benefitted from synergistic effect of 0D/2D/3D structural defects,the designed WO_(3)/MoO_(2) shows the higher specific capacity(112.8 mA h g^(-1) at 50 mA g^(-1) with average attenuation rate per cycle of 0.068%),superior rate capability and excellent cycling stability(specific capacity retention of 80% after 1500 cycles at 1000 mA g^(-1)).This strategy provides design ideas of introducing multidimensional structural defects for tailoring local electron and microstructure to improve energy storage property.

Atomic insights of electronic states engineering of GaN nanowires by Cu cation substitution for highly efficient lithium ion battery

Electronic engineering of gallium nitride(Ga N) is critical for enhancement of its electrode performance.In this work, copper(Cu) cation substituted Ga N(Cu-Ga N) nanowires were fabricated to understand the electronically engineered electrochemical performance for Li ion storage. Cu cation substitution was revealed at atomic level by combination of X-ray photoelectron spectroscopy(XPS), X-ray absorption fine structure(XAFS), density functional theory(DFT) simulation, and so forth. The Cu-Ga N electrode delivered high capacity of 813.2 m A h g^(-1) at 0.1 A g^(-1) after 200 cycles, increased by 66% relative to the unsubstituted Ga N electrode. After 2000 cycles at 10 A g^(-1),the reversible capacity was still maintained at326.7 m A h g^(-1). The DFT calculations revealed that Cu substitution introduced the impurity electronic states and efficient interatomic electron migration, which can enhance the charge transfer efficiency and reduce the Li ion adsorption energy on the Cu-Ga N electrode. The ex-situ SEM, TEM, HRTEM, and SAED analyses demonstrated the reversible intercalation Li ion storage mechanism and good structural stability. The concept of atomic-arrangement-assisted electronic engineering strategy is anticipated to open up opportunities for advanced energy storage applications.