The mixing of powders is a highly relevant field under additive manufacturing,however,it has attracted limited interest to date.The in-situ mixing of various powders remains a significant challenge.This paper proposes...The mixing of powders is a highly relevant field under additive manufacturing,however,it has attracted limited interest to date.The in-situ mixing of various powders remains a significant challenge.This paper proposes a new method utilizing a static mixer for the in-situ mixing of multiple powders through the laser-based directed energy deposition(DED)of functionally graded materials.Firstly,a powder-mixing experimental platform was established;WC and 316L powders were selected for the mixing experiments.Secondly,scanning electron microscopy,energy dispersive spectroscopy,and image processing were used to visually evaluate the homogeneity and proportion of the in-situ mixed powder.Furthermore,powder-mixing simulations were conducted to determine the powder-mixing mechanism.In the simulations,a powder carrier gas flow field and particle mixing were employed.Finally,a WC/316L metal matrix composite sample was produced using laser-based DED to verify the application potential of the static mixer.It was found that the static mixer could adjust the powder ratio online,and a response time of 1–2 s should be considered when adjusting the ratio of the mixed powder.A feasible approach for in-situ powder mixing for laser-based DED was demonstrated and investigated,creating the basis for functionally graded materials.展开更多
基金supported by Jiangsu Industry-University-Research Institute Cooperation Project(Grant No.BY2021078).
文摘The mixing of powders is a highly relevant field under additive manufacturing,however,it has attracted limited interest to date.The in-situ mixing of various powders remains a significant challenge.This paper proposes a new method utilizing a static mixer for the in-situ mixing of multiple powders through the laser-based directed energy deposition(DED)of functionally graded materials.Firstly,a powder-mixing experimental platform was established;WC and 316L powders were selected for the mixing experiments.Secondly,scanning electron microscopy,energy dispersive spectroscopy,and image processing were used to visually evaluate the homogeneity and proportion of the in-situ mixed powder.Furthermore,powder-mixing simulations were conducted to determine the powder-mixing mechanism.In the simulations,a powder carrier gas flow field and particle mixing were employed.Finally,a WC/316L metal matrix composite sample was produced using laser-based DED to verify the application potential of the static mixer.It was found that the static mixer could adjust the powder ratio online,and a response time of 1–2 s should be considered when adjusting the ratio of the mixed powder.A feasible approach for in-situ powder mixing for laser-based DED was demonstrated and investigated,creating the basis for functionally graded materials.
