Multi-objective regulation in autohydrolysis process of corn stover by liquid hot water pretreatment

Increasing reducing sugars(xylose and glucose) yield for bioethanol from corn stover depends strongly on optimization of pretreatment conditions. The optimum reaction conditions of two-stage liquid hot water(LHW) pretreatment based on total sugars yield were investigated. Under optimal conditions, the recovery of glucose of corn stover after two-stage LHW pretreatment and 72 h enzymatic digestion, reached 89.55%. In addition, acetic acid-rich spent liquor pretreatment and one-stage LHW pretreatment have been carried out to make comparisons with two-stage LHW treatment. Glucose yield 89.55% is superior to the recovery 83.38% using acetic acidrich spent liquor pretreatment or 80.58% using one-stage LHW pretreatment. The production of total sugars was increased by 7.8% when compared with one-stage pretreatment. Moreover, the structural features of the treated corn stover solid residues were also investigated by XRD and SEM technology in order to clarify the effects of the reaction on corn stover. The results indicated that the two-stage LHW pretreatment was an effective pretreatment method of corn stover to get most massive resource utilization, and it could be successfully applied to corn stover.

Adsorption equilibrium for Z-ligustilide on C18-bonded silica from supercritical carbon dioxide

Adsorption equilibrium is of great importance for the preparative supercritical fluid chromatography(pre-SFC) in defining supercritical adsorption behavior and the industrial amplification.This paper presents adsorption isotherms of Z-ligustilide from supercritical carbon dioxide(SC-CO_2) on C18-bonded silica.Adsorption behavior was studied at 305.15 K,313.15 K and 323.15 K with SC-CO_2 density varying from 0.687 g·cm^(-3) to0.863 g·cm^(-3) with the elution by characteristic points(ECP) method.The adsorption amount of Z-ligustilide from SC-CO_2 on C18-bonded silica decreased with the increasing density of the mobile phase as well as the increasing temperature.Adsorption equilibrium data were fitted by Langmuir and Freundlich isotherm models,and the Langmuir isotherm model performed better for describing the whole adsorption process on the column.The monolayer saturation adsorption capacity of Z-ligustilide is in the range of 3.0 × 10^(-4) mg·cm^(-3) to5.5 × 10^(-4) mg·cm^(-3) with an average value of 4.0 × 10^(-4) mg·cm^(-3).

Adsorption equilibria of paeoniflorin and albiflorin on cyano-silica column from supercritical carbon dioxide/ethanol

Adsorption equilibria of paeoniflorin and albiflorin on a cyano-silica column(CN column) from the solution of supercritical carbon dioxide(scCO2) modified with ethanol were studied. The adsorption capacity at 308.15 K,313.15 K, 318.15 K and 323.15 K under pressures corresponding to carbon dioxide/ethanol densities from0.347 g·cm^-3 to 0.662 g·cm^-3 were determined using the elution by characteristic point method(ECP). The effects of temperature and pressure on the solute loading were investigated. The results showed that the lower the temperature, the higher the adsorption capacity. With the decrease of density of scCO2, the adsorption capacity strengthens. The maximum adsorption capacity of paeoniflorin(albiflorin) on the CN column was15.24 mg·ml^-1(31.14 mg·ml^-1) in the range of 0–1.84 mg·ml^-1(0–1.67 mg·ml^-1) of paeoniflorin(albiflorin)standard solution. The adsorption capacity of albiflorin was twice as much as that of paeoniflorin under the same conditions. Adsorption data of paeoniflorin and albiflorin could be well described by the Langmuir model and Freundlich model. Compared with the two model fitting results, the adsorption of paeoniflorin and albiflorin belonged to the monolayer adsorption under conditions of 308.15–323.15 K and 10–17 MPa.

Accelerating the thermal fading rate of photochromic naphthopyrans by pillar[5]arene-based conjugated macrocycle polymer

A new micro-spherical conjugated macrocycle polymer(P[5]-TFB-CMP)was prepared by the condensation reaction between dihydrazide functionalized pillar[5]arene and 1,3,5-triformylbenzene under ambient conditions.P[5]-TFB-CMP exhibits large surface area with excellent thermal stability and has been used as additive to prepare composite PMMA film of photochromic naphthopyrans.The results showed that the addition of P[5]-TFB-CMP could dramatically accelerate the thermal fading rate of the photochromic composite film by up to 12 times.This is a new strategy to overcome the drawback of the matrix effect.