Angular color uniformity enhancement of white light-emitting diodes by remote micro-patterned phosphor film

Angular color uniformity(ACU)is a key factor used to evaluate the light quality of white-light emitting diodes(LEDs).In this study,a novel double remote micro-patterned phosphor film(double RMPP film)was used to enhance the ACU of a remote phosphor(RP)down-light lamp.A conventional RP film and remote phosphor film with single micro-patterned film(single RMPP film)also were examined for comparison.The angular correlated color temperature(CCT)distributions and the optical performance of the films were experimentally measured.The measurement results showed that double RMPP film configuration exhibited better color uniformity with a CCT deviation of only 441 K,compared with 556 K for the single RMPP film configuration and 1390 K for the RP film configuration.A simulation based on FDTD and ray tracing combined method also confirmed the ACU improvement.In addition,compared with the conventional RP film,the luminous efficiency of single and double RMPP film configurations was increased by 6.68% and 4.69%,respectively,at a driving current of 350 mA.The enhancement of the ACU and luminous efficiency are due to the scattering and mixing effect of the micropatterned film.Moreover,the double RMPP film configuration had better CCT stability at different currents than the other two configurations.The results demonstrated the effectiveness and superiority of double RMPP film in white LED applications.

Enhanced optical and thermal performance of white light-emitting diodes with horizontally layered quantum dots phosphor nanocomposites

Due to their good color rendering ability, white light-emitting diodes(WLEDs) with conventional phosphor and quantum dots(QDs) are gaining increasing attention. However, their optical and thermal performances are still limited especially for the ones with QDs-phosphor mixed nanocomposites. In this work, we propose a novel packaging scheme with horizontally layered QDs-phosphor nanocomposites to obtain an enhanced optical and thermal performance for WLEDs. Three different WLEDs, including QDs-phosphor mixed type, QDsoutside type, and QDs-inside type, were fabricated and compared. With 30 wt. % phosphor and 0.15 wt. % QDs nanocomposite, the QDs-outside type WLED shows a 21.8% increase of luminous efficiency, better color rendering ability, and a 27.0% decrease of the maximum nanocomposite temperature at 400 mA, compared with the mixed-type WLED. The reduced re-absorption between phosphor and QDs is responsible for the performance enhancement when they are separated. However, such reduced absorption can be traded off by the improper layered configuration, which is demonstrated by the worst performance of the QDs-inside type. Further, we demonstrate that the higher energy transfer efficiency between excitation light and nanocomposite in the QDs-outside type WLED is the key reason for its enhanced optical and thermal performance.