The key factor of the sensitivity in the FBG-based pH sensor is analyzed in detail. A multi-thin-layer structure of the gel coated cover was proposed and implemented with a special process. The sensors with the coated...The key factor of the sensitivity in the FBG-based pH sensor is analyzed in detail. A multi-thin-layer structure of the gel coated cover was proposed and implemented with a special process. The sensors with the coated thickness of 420 ~m, 500 ~m, and 580 ~m were built up, respectively. The corresponding spectral shifts of 0.08nm, 0.13nm, and 0.22nm were detected when the pH sensors were soaked in the pH value of 3-9. Meanwhile, the sensor with the gel layer thickness of 580 ~tm was measured in the optimum measurement time period with the pH value changing from 3-12, in which the detected sensitivity of 52pm/pH was achieved in the pH range of 6-12.展开更多
文摘The key factor of the sensitivity in the FBG-based pH sensor is analyzed in detail. A multi-thin-layer structure of the gel coated cover was proposed and implemented with a special process. The sensors with the coated thickness of 420 ~m, 500 ~m, and 580 ~m were built up, respectively. The corresponding spectral shifts of 0.08nm, 0.13nm, and 0.22nm were detected when the pH sensors were soaked in the pH value of 3-9. Meanwhile, the sensor with the gel layer thickness of 580 ~tm was measured in the optimum measurement time period with the pH value changing from 3-12, in which the detected sensitivity of 52pm/pH was achieved in the pH range of 6-12.
