Mechanical behavior of sandstone during post-peak cyclic loading and unloading under hydromechanical coupling

This paper investigates mechanical behaviours of sandstone during post-peak cyclic loading and unloading subjected to hydromechanical coupling effect, confirming the peak and residual strengths reduction laws of sandstone with water pressure, and revealing the influence of water pressure on the upper limit stress and deformation characteristics of sandstone during post-peak cyclic loading and unloading.Regarding the rock strength, the experimental study confirms that the peak strength σ_(p) and residual strength σ_(r) decrease as water pressure P increases. Especially, the normalized strength parameters σ_(p)/σ_(pk) and σ_(r)/σ_(re) was negatively and linearly correlated with the P/σ_(3). Moreover, the Hoek-Brown strength criterion can be applied to describe the relationship between effective peak strength and effective confining stress. During post-peak cyclic loading and unloading, both the upper limit stress σ_(p(i)) and crack damage threshold stress σ_(cd(i)) of each cycle tend to decrease with the increasing cycle number. A hysteresis loop exists among the loading and unloading stress–strain curves, indicating the unloading deformation modulus E_(unload) is larger than the loading deformation modulus E_(load). Based on experimental results,a post-peak strength prediction model related to water pressure and plastic shear strain is established.

Corrigendum to “Mechanical behavior of sandstone during post-peak cyclic loading and unloading under hydromechanical coupling”[Int J Min Sci Technol 33(8)(2023)927-947]

The authors regret that ‘Houquan Zhang’applies to remove his name and affiliation from the author list because he thought that he didn't make enough great contributions to this paper,just dis-cus:sion about the outline for the paper writing and some revision suggestions.The correct author list and affi liations are updated as above.

Evolution and modeling of mine water inflow and hazard characteristics in southern coalfields of China:A case of Meitanba mine

In this paper,the hydrogeological characteristics in the southern coalfields of China are first briefly outlined.Then,taking the Meitanba mine as an example,the evolution and modeling of mine water inflow are studied.Finally,the hazard characteristics related to mine water and mud inrush are analyzed.The results show that the main mine water sources in the Meitanba mine area are groundwater,surface water and precipitation.The evolution of mine water inflow with time indicates that the water inflow is closely related to the development of karst structures,the amount of water from rainfall infiltration,and the scope of groundwater depression cone.The mine water inflow increases with time due to the increase in mining depth and the expansion of groundwater depression cone.Using the big well method and following the potential superposition principle,a hydrogeological model considering multi-well interactions has been developed to predict the mine water inflow.Based on the monitored data in the Meitanba mine area over a period of nearly 60 years,it is found that with increasing mining depth,the number of water and mud inrush points tended to decrease.However,the average water and mud flow rate per point tended to increase.

Width design for gobs and isolated coal pillars based on overall burst-instability prevention in coal mines

This paper presents a study on the valorization of local materials such as desert dune sand obtained from Laghouat region in the South Algeria and mine bentonite intended for the realization of liner base layers in the conception of insulation barriers for hazardous waste facilities. In practice, an economical mixture satisfying the hydraulic requirements is generally concerned. First, in order to get an adequate dune sand ebentonite mixture compacted to the optimum Proctor condition, an investigation on saturated hydraulic behavior is carried out in this study for different mixtures. Using oedometer test（indirect measurement）, the adequate mixture of 85% dune sand and 15% bentonite satisfies the conditions of saturated hydraulic conductivity（k 〈 10^（-9）m/s）. This result of the adequate mixture is also confirmed by direct measurement of saturated hydraulic conductivity using triaxial cell. Second, the unsaturated hydraulic conductivity of the adequate mixture is measured with an original vapor equilibrium technique（VET） used for S r〈 30%（very high suction s 〉 3 MPa）. This technique is conducted based on the exploitation of the water retention curve in order to establish the relationships between hydraulic conductivity, degree of saturation, and suction. It shows that the hydraulic conductivity increases with the degree of saturation and decreases with the suction. However, the hydraulic conductivity has a constant value for suctions larger than 20 MPa. The selected dune sandebentonite mixture satisfies the regulation requirements and hence constitutes a good local and economical material for the conception of barrier base liners.

RNAirport:a deep neural network-based database characterizing representative gene models inplants

A 5'-leader,known initially as the 5'-untranslated region,contains multiple isoforms due to alternative splicing(aS)and alternative transcription start site(aTSS).Therefore,a representative 5'-leader is demanded to examine the embedded RNA regulatory elements in controlling translation efficiency.Here,we develop a ranking algorithm and a deep-learning model to annotate representative 5'-leaders for five plant species.We rank the intra-sample and inter-sample frequency of aS-mediated transcript isoforms using the Kruskal-Wallis test-based algorithm and identify the representative aS-5'-leader.To further assign a representative 5'-end,we train the deep-learning model 5'leaderP to learn aTsS-mediated 5'-end distribution patterns from cap-analysis gene expression data.The model accurately predicts the 5'-end,confirmed experimentally in Arabidopsis and rice.The representative 5'-leader-contained gene models and 5'leaderP can be accessed at RNAirport(http:/www.rnairport.com/leader5P/).The Stage 1 annotation of 5'-leader records 5'-leader diversity and will pave the way to Ribo-Seq open-reading frame annotation,identical to the project recently initiated by human GENCODE.