The traditional large electroslag remelting furnaces have many shortages,such as high short-network impedance and inductance,long maintenance time for electrode replacement,low stiffness of driveline,and low control a...The traditional large electroslag remelting furnaces have many shortages,such as high short-network impedance and inductance,long maintenance time for electrode replacement,low stiffness of driveline,and low control accuracy of remelting speed.The present research was aimed to solve these problems through structure modification and constant remelting speed control for a 120-t electroslag remelting(ESR) furnace.Based on the technique of three-phase double electrodes in series,the short-network system and the structure of the 120-t ESR furnace were improved;and a continuous feeding system for the self-consumption electrode was proposed.A selfdesigned fully hydraulic driveline system with three degrees of freedom was successfully applied to the 120-t ESR furnace.An electrode auto-replacement system and the S-style speed-control curve of electrode-feeding system were designed on the basis of the soft measurement/sensing model on the remaining electrode length so as to obtain a high accuracy control system for constant remelting speed.The experiment products showed good surface quality and cross-sectional results,indicating good system control,and verifying the effectiveness of the structure modification of the furnace.展开更多
In the electroslag remelting process, the electrode molten state is a critical factor determining the ingot quality, while the electrode immersion depth and melting rate are key factors for the stability of the electr...In the electroslag remelting process, the electrode molten state is a critical factor determining the ingot quality, while the electrode immersion depth and melting rate are key factors for the stability of the electroslag re-melting process. Studies were carried out to investigate the microscopic and macroscopic effects of electrode immersion depth and melting rate on the potential distribution and heat density in the slag bath, and on the depth and shape of the molten bath. Based on the finite element method and the numerical solution method, the effect of the electrode immersion depth on the slag bath heat density was researched; the relationship between the electrode immersion depth and the slag resistance was obtained; and the unsteady-state model of the solidification process of the re-melting ingot was solved using the finite difference method. The mathematical model and physical model of the electrode melting process were established and solved; and the corresponding curves between the electrode molten-state and slag-bath physical parameters were obtained. The experimental results verified the simulated results studied in this paper.展开更多
基金financially supported by the National Science and Technology Major Project of the Eleventh Five-Year Plan of China(2009ZX04006-032)
文摘The traditional large electroslag remelting furnaces have many shortages,such as high short-network impedance and inductance,long maintenance time for electrode replacement,low stiffness of driveline,and low control accuracy of remelting speed.The present research was aimed to solve these problems through structure modification and constant remelting speed control for a 120-t electroslag remelting(ESR) furnace.Based on the technique of three-phase double electrodes in series,the short-network system and the structure of the 120-t ESR furnace were improved;and a continuous feeding system for the self-consumption electrode was proposed.A selfdesigned fully hydraulic driveline system with three degrees of freedom was successfully applied to the 120-t ESR furnace.An electrode auto-replacement system and the S-style speed-control curve of electrode-feeding system were designed on the basis of the soft measurement/sensing model on the remaining electrode length so as to obtain a high accuracy control system for constant remelting speed.The experiment products showed good surface quality and cross-sectional results,indicating good system control,and verifying the effectiveness of the structure modification of the furnace.
基金financially supported by the Machine Tools Major Project of the Eleventh Five-Year Plan of China(grant No.2009ZX04006-032)
文摘In the electroslag remelting process, the electrode molten state is a critical factor determining the ingot quality, while the electrode immersion depth and melting rate are key factors for the stability of the electroslag re-melting process. Studies were carried out to investigate the microscopic and macroscopic effects of electrode immersion depth and melting rate on the potential distribution and heat density in the slag bath, and on the depth and shape of the molten bath. Based on the finite element method and the numerical solution method, the effect of the electrode immersion depth on the slag bath heat density was researched; the relationship between the electrode immersion depth and the slag resistance was obtained; and the unsteady-state model of the solidification process of the re-melting ingot was solved using the finite difference method. The mathematical model and physical model of the electrode melting process were established and solved; and the corresponding curves between the electrode molten-state and slag-bath physical parameters were obtained. The experimental results verified the simulated results studied in this paper.
