Effects of rare earth Ce addition on microstructure and mechanical properties of impure copper containing Pb

The effects of rare earth Ce on the microstructure and mechanical properties of impure copper containing Pb were investigated using OM,SEM,EPMA,TEM and tensile testing.TEM and EDS analysis reveal that spherical CePb3 particles form after Ce addition.CePb3 particles,with average size of^3.6μm,homogenously distribute in the Cu matrix.Due to small lattice misfit(~4.62%)with Cu matrix,CePb3 particles can act as effective nucleation sites beneficial to the grain refinement.Pb at grain boundaries seriously deteriorates the mechanical properties of Cu.The tensile strength and the elongation of Cu-0.1 Pb are decreased by 43.1%and 56.7%compared with those of pure copper,respectively.Ce can purify grain boundaries,cause the precipitation of CePb3 particles and refine grain sizes,which contribute to significant improvement of the mechanical properties of Cu.Compared with Cu-0.1Pb,the tensile strength(179 MPa)and the elongation(38.5%)of Cu-0.1Pb-0.3Ce are increased by 117.6%and 151.6%,respectively.

Co-localization of two-color rAAV2-retro confirms the dispersion characteristics of efferent projections of mitral cells in mouse accessory olfactory bulb

The accessory olfactory bulb(AOB), located at the posterior dorsal aspect of the main olfactory bulb(MOB), is the first brain relay of the accessory olfactory system(AOS), which can parallelly detect and process volatile and nonvolatile social chemosignals and mediate different sexual and social behaviors with the main olfactory system(MOS). However, due to its anatomical location and absence of specific markers, there is a lack of research on the internal and external neural circuits of the AOB. This issue was addressed by singlecolor labeling and fluorescent double labeling using retrograde rAAVs injected into the bed nucleus of the stria terminalis(BST), anterior cortical amygdalar area(ACo), medial amygdaloid nucleus(MeA), and posteromedial cortical amygdaloid area(PMCo) in mice. We demonstrated the effectiveness of this AOB projection neuron labeling method and showed that the mitral cells of the AOB exhibited efferent projection dispersion characteristics similar to those of the MOB. Moreover, there were significant differences in the number of neurons projected to different brain regions, which indicated that each mitral cell in the AOB could project to a different number of neurons in different cortices. These results provide a circuitry basis to help understand the mechanism by which pheromone information is encoded and decoded in the AOS.

Evolution of Goss texture in thin-walled copper tube at different heat treatment temperatures

The evolution of microstructure,textures,and mechanical properties of thin-walled copper tube during heat treatment was investigated using EBSD technique and tensile test.The results show that the initial deformation textures of pre-drawn thin-walled copper tube are mainly composed of Copper and Y components,while with the increase of temperatures,the textures are transformed into a strong Goss texture gradually.The high-resolution microstructural characterizations indicate that the new Goss recrystallized grains nucleate and grow up within the deformed Copper grains and Y grains in different mechanisms,respectively.The tensile strength of the thin-walled copper tube decreases gradually with the increase of the temperature,while the elongation increases first and then decreases sharply due to the action of grain sizes and texture components.

Evolution of Annealing Twins and Recrystallization Texture in Thin-Walled Copper Tube During Heat Treatment

Thin-walled copper tubes are usually produced by multi-pass float-plug drawing deformation.In general,the annealing treatment subsequently is necessary to release the stored energy and adjusts the microstructure.In this study,an investigation on the evolution of annealing twins as well as textures in the thin-walled(Φ6 mm×0.3 mm)copper tube underwent holding time-free heat treatment was reported.Electron backscattered diffraction analysis reveals that a large number ofΣ3 boundaries(600<111>twin relationship)are produced at the early stage of heat treatment,which is due to the lower boundary energy.With the recrystallization proceeding,the migration rate of grain boundaries decreases on account of the grain growth;meanwhile,the uniqueΣ9 boundaries(38.9°<110>relationship)are formed due to the interaction of theΣ3 boundaries.As a result,the number fractions ofΣ3 boundaries and high-angle grain boundaries decrease rapidly.During the grain growth stage,a strong recrystallization texture was formed due to the fact that the grains of Goss orientation have a growth advantage over the others.As a result,the initial copper texture was transferred into the Goss texture in domination.