Al-6.5Si-42Zn and Al-6.5Si-42Zn-0.09Sr filler metals were used for brazing 6061 aluminum alloy. Air cooling and water cooling were applied after brazing. Si phase morphologies in the brazing alloy and the brazed joint...Al-6.5Si-42Zn and Al-6.5Si-42Zn-0.09Sr filler metals were used for brazing 6061 aluminum alloy. Air cooling and water cooling were applied after brazing. Si phase morphologies in the brazing alloy and the brazed joints were investigated. It was found that zinc in the Al-Si filler metals could reduce the formation of eutectic Al-Si phase and lower the brazing temperature at about 520℃. Adding 0.09wt% Sr element into the Al-6.5Si-42Zn alloy caused a-Al phase refinement and transformed acicular Si phase into the finely fiber-like. After water cooling, Zn element dissolved into the Al-Si eutectic area, and η-Zn phase disappeared in the brazed joints. Tensile strength testing results showed that the Sr-modified filler metal could enhance the strength of the brazed joints by 13% than Al-12Si, while water-cooling further improved the strength at 144 MPa.展开更多
Cerium and titanium were added to an A1-42Zn-5.5Si brazing alloy, and the subsequent microstructures of the brazing alloy and the 6061 AI alloy brazing seam were investigated. The microstructures of filler metals and ...Cerium and titanium were added to an A1-42Zn-5.5Si brazing alloy, and the subsequent microstructures of the brazing alloy and the 6061 AI alloy brazing seam were investigated. The microstructures of filler metals and brazed joints were characterized by scanning elec- tron microscopy and X-ray energy dispersion spectrometry. A new Ce-Ti phase formed around the silicon phase in the modified filler metal and this saturation phenomenon was analyzed. Interestingly, following brazing of the 6061 alloy, there is no evidence of the Ce--Ti phase in the brazing seam. Because of the mutual solubility of the brazing alloy and base metal, the quantity of the solvent increases, and the solute Ce and Ti atoms assume an undersaturated state.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52105369,61974070)Natural Science Foundation of the Jiangsu Higher Education Institutions of China(No.20KJB460008)+1 种基金Natural Science Foundation of Jiangsu Province,China(No.BK20200746)NUPTSF(No.NY220077).
基金financially supported by the Foundation of Scientist and Technician Serving the Enterprise,the Ministry of Science and Technology of China (No.2009GJC20040)
文摘Al-6.5Si-42Zn and Al-6.5Si-42Zn-0.09Sr filler metals were used for brazing 6061 aluminum alloy. Air cooling and water cooling were applied after brazing. Si phase morphologies in the brazing alloy and the brazed joints were investigated. It was found that zinc in the Al-Si filler metals could reduce the formation of eutectic Al-Si phase and lower the brazing temperature at about 520℃. Adding 0.09wt% Sr element into the Al-6.5Si-42Zn alloy caused a-Al phase refinement and transformed acicular Si phase into the finely fiber-like. After water cooling, Zn element dissolved into the Al-Si eutectic area, and η-Zn phase disappeared in the brazed joints. Tensile strength testing results showed that the Sr-modified filler metal could enhance the strength of the brazed joints by 13% than Al-12Si, while water-cooling further improved the strength at 144 MPa.
基金financially supported by the National Natural Science Foundation of China(No.51375233)
文摘Cerium and titanium were added to an A1-42Zn-5.5Si brazing alloy, and the subsequent microstructures of the brazing alloy and the 6061 AI alloy brazing seam were investigated. The microstructures of filler metals and brazed joints were characterized by scanning elec- tron microscopy and X-ray energy dispersion spectrometry. A new Ce-Ti phase formed around the silicon phase in the modified filler metal and this saturation phenomenon was analyzed. Interestingly, following brazing of the 6061 alloy, there is no evidence of the Ce--Ti phase in the brazing seam. Because of the mutual solubility of the brazing alloy and base metal, the quantity of the solvent increases, and the solute Ce and Ti atoms assume an undersaturated state.