The effect of stabilizing elements, such as Nb and Ti, on the microstructure and properties of low carbon ferritic stainless steel （FSS） has been investigated. The results of the Thermo-calc simulation have shown th...The effect of stabilizing elements, such as Nb and Ti, on the microstructure and properties of low carbon ferritic stainless steel （FSS） has been investigated. The results of the Thermo-calc simulation have shown that the interstitial elements, such as C and N, may be completely stabilized by the addition of Nb and Ti. With the increase of Nb and Ti contents ,the α ＋ γ two phases gradually transfer to a single α-phase under a high temperature condition ,and the content of the carbide M23 C6 gradually decreases. The microstructure has indicated that the combined addition of Nb and Ti can promote the recrystallization of the band structure and form more uniform equiaxed grains. Also, with the increase of Nb and Ti contents,the elongation, the r-value and the corrosion resistance of cold-rolled and annealed sheets are improved prominently. In comparison with the effect of Ti ,the addition of Nb is more beneficial to the increase of r-value and the corrosion resistance.展开更多
With the increase in the content of carbon, nitrogen and titanium in 430 ferritic stainless steel, the refinement of the solidification structure is obvious and the proportion of equiaxed grain increases remarkably as...With the increase in the content of carbon, nitrogen and titanium in 430 ferritic stainless steel, the refinement of the solidification structure is obvious and the proportion of equiaxed grain increases remarkably as well. This is attributed to the increasing role of the inhomogeneous nucleation by TiN particles during solidification. In addition, more fine precipitations of （Ti ,Nb）N are found in steel with increased carbon and nitrogen content.展开更多
During the production of the inner walls of ovens,pit defects were formed on the surface of the enamel layer that was enameled on the cold-rolled steel via electrostatic powder spraying and sintering.The paper elabora...During the production of the inner walls of ovens,pit defects were formed on the surface of the enamel layer that was enameled on the cold-rolled steel via electrostatic powder spraying and sintering.The paper elaborates on the microstructure and element distribution of the enamel-steel interface and the enamel layer.Optical microscopy,scanning electron microscopy,and energy-dispersive spectroscopy were adopted to investigate the microstructure of a longitudinal section of the defect,and the pit-forming causes were analyzed.The results show that rusty spots lead to pit defects.During high-temperature firing,there is an inadequate fusion and reaction between iron oxides of the rusty spots and the enamel glaze.The rusty spots are closely related to pretreatment process;thus,to avoid their occurrence,electrostatic powder spraying and sintering should be performed timely after forming,degreasing,and thorough drying of the metal sheets.展开更多
In order to understand the effect of the solidification structure on the formability of ultra low carbon ferritic stainless steel （FSS） ,this work studies the ridging phenomenon and the deep-drawing property in deta...In order to understand the effect of the solidification structure on the formability of ultra low carbon ferritic stainless steel （FSS） ,this work studies the ridging phenomenon and the deep-drawing property in detail and the research method was X-ray diffraction （XRD） and scanning electron microscope （SEM） technique. The result shows that the columnar grain specimen had a higher ridging height than the equiaxed grain specimen, which was mainly attributed to the formation of grain colonies in the columnar grain specimen. After final recrystallization annealing, the equiaxed grain specimen obtained a high-intensity T-fiber texture and an excellent deep-drawing property.展开更多
The composition and production technology of the type of hot-rolled steel plate used in two-sided enameling were briefly described. The microstructure and mechanical properties before and after enameling were contrast...The composition and production technology of the type of hot-rolled steel plate used in two-sided enameling were briefly described. The microstructure and mechanical properties before and after enameling were contrastively investigated,and the precipitates in the samples were analyzed using transmission electron microscope and energy dispersive spectrometer. The results show the ferrite grain size of the steel plate after high-temperature enamel firing to be fine,with a large number of TiC and Ti;C;S;precipitates dispersed throughout the ferrite matrix. After two rounds of enamel firing at a temperature range of 800-890 ℃,its yield strength can still reach342 MPa. The results of a hydrogen permeation test show that the hydrogen storage properties of the steel plate are much better than those of ordinary structural carbon steel. A better bubble structure in the enamel layer can be obtained by this steel plate,with no fish-scale defects on the enameled steel-plate surface.展开更多
With its superior comprehensive properties, cold-rolled enameling steel is widely applied in many fields. However, its low yield stress greatly limits its application. This study aims to improve the yield stress of co...With its superior comprehensive properties, cold-rolled enameling steel is widely applied in many fields. However, its low yield stress greatly limits its application. This study aims to improve the yield stress of cold-rolled enameling steel under the premise of meeting formability and enameling properties by strengthening the ferrite matrix via solid strengthening of Mn. The grain size of ferrite before and after enameling,mechanical properties of annealed steel, and precipitation behavior of second-phase precipitates are obtained through studying the microstructure and properties of enameling steel at different stages. The microstructure of the steel investigated at room temperature is found to contain equiaxial ferrite and bunchy cementite particles;the ferrite grains have grown to some extent after enameling. The fine dispersed TiC particles and cementite particles contained in the annealed steel are the main factors improving the hydrogen storage capability. Finally, the result of a falling-ball impact test shows that the steel has achieved excellent adherence.展开更多
Ultra-low carbon（ULC）,cold-rolled sheet steels for porcelain enameling containing alloys of titanium and boron are studied. The microstructure,mechanical properties,inclusions,and precipitates of the sheet steels ar...Ultra-low carbon（ULC）,cold-rolled sheet steels for porcelain enameling containing alloys of titanium and boron are studied. The microstructure,mechanical properties,inclusions,and precipitates of the sheet steels are analyzed. The hydrogen permeation time of the sheet steels as-annealed and after skin-passed or cold-rolled at different reductions are measured. It is show n that the sheet steels possess different features of enameling properties in hydrogen permeability,fishscale resistance,and pinhole resistance.展开更多
基金funded by the CITIC-CBMM R & D Subject Foundation(2010-D046).
文摘The effect of stabilizing elements, such as Nb and Ti, on the microstructure and properties of low carbon ferritic stainless steel （FSS） has been investigated. The results of the Thermo-calc simulation have shown that the interstitial elements, such as C and N, may be completely stabilized by the addition of Nb and Ti. With the increase of Nb and Ti contents ,the α ＋ γ two phases gradually transfer to a single α-phase under a high temperature condition ,and the content of the carbide M23 C6 gradually decreases. The microstructure has indicated that the combined addition of Nb and Ti can promote the recrystallization of the band structure and form more uniform equiaxed grains. Also, with the increase of Nb and Ti contents,the elongation, the r-value and the corrosion resistance of cold-rolled and annealed sheets are improved prominently. In comparison with the effect of Ti ,the addition of Nb is more beneficial to the increase of r-value and the corrosion resistance.
基金this project by both the National Natural Science Foundation of China(NSF 50734002)and Baosteel is fully acknowledged.
文摘With the increase in the content of carbon, nitrogen and titanium in 430 ferritic stainless steel, the refinement of the solidification structure is obvious and the proportion of equiaxed grain increases remarkably as well. This is attributed to the increasing role of the inhomogeneous nucleation by TiN particles during solidification. In addition, more fine precipitations of （Ti ,Nb）N are found in steel with increased carbon and nitrogen content.
文摘During the production of the inner walls of ovens,pit defects were formed on the surface of the enamel layer that was enameled on the cold-rolled steel via electrostatic powder spraying and sintering.The paper elaborates on the microstructure and element distribution of the enamel-steel interface and the enamel layer.Optical microscopy,scanning electron microscopy,and energy-dispersive spectroscopy were adopted to investigate the microstructure of a longitudinal section of the defect,and the pit-forming causes were analyzed.The results show that rusty spots lead to pit defects.During high-temperature firing,there is an inadequate fusion and reaction between iron oxides of the rusty spots and the enamel glaze.The rusty spots are closely related to pretreatment process;thus,to avoid their occurrence,electrostatic powder spraying and sintering should be performed timely after forming,degreasing,and thorough drying of the metal sheets.
基金funded by both the National Natural Science Foundation of China(50734002)CITIC-CBMM R&D Subject Foundation (2010-D046).
文摘In order to understand the effect of the solidification structure on the formability of ultra low carbon ferritic stainless steel （FSS） ,this work studies the ridging phenomenon and the deep-drawing property in detail and the research method was X-ray diffraction （XRD） and scanning electron microscope （SEM） technique. The result shows that the columnar grain specimen had a higher ridging height than the equiaxed grain specimen, which was mainly attributed to the formation of grain colonies in the columnar grain specimen. After final recrystallization annealing, the equiaxed grain specimen obtained a high-intensity T-fiber texture and an excellent deep-drawing property.
文摘The composition and production technology of the type of hot-rolled steel plate used in two-sided enameling were briefly described. The microstructure and mechanical properties before and after enameling were contrastively investigated,and the precipitates in the samples were analyzed using transmission electron microscope and energy dispersive spectrometer. The results show the ferrite grain size of the steel plate after high-temperature enamel firing to be fine,with a large number of TiC and Ti;C;S;precipitates dispersed throughout the ferrite matrix. After two rounds of enamel firing at a temperature range of 800-890 ℃,its yield strength can still reach342 MPa. The results of a hydrogen permeation test show that the hydrogen storage properties of the steel plate are much better than those of ordinary structural carbon steel. A better bubble structure in the enamel layer can be obtained by this steel plate,with no fish-scale defects on the enameled steel-plate surface.
文摘With its superior comprehensive properties, cold-rolled enameling steel is widely applied in many fields. However, its low yield stress greatly limits its application. This study aims to improve the yield stress of cold-rolled enameling steel under the premise of meeting formability and enameling properties by strengthening the ferrite matrix via solid strengthening of Mn. The grain size of ferrite before and after enameling,mechanical properties of annealed steel, and precipitation behavior of second-phase precipitates are obtained through studying the microstructure and properties of enameling steel at different stages. The microstructure of the steel investigated at room temperature is found to contain equiaxial ferrite and bunchy cementite particles;the ferrite grains have grown to some extent after enameling. The fine dispersed TiC particles and cementite particles contained in the annealed steel are the main factors improving the hydrogen storage capability. Finally, the result of a falling-ball impact test shows that the steel has achieved excellent adherence.
文摘Ultra-low carbon（ULC）,cold-rolled sheet steels for porcelain enameling containing alloys of titanium and boron are studied. The microstructure,mechanical properties,inclusions,and precipitates of the sheet steels are analyzed. The hydrogen permeation time of the sheet steels as-annealed and after skin-passed or cold-rolled at different reductions are measured. It is show n that the sheet steels possess different features of enameling properties in hydrogen permeability,fishscale resistance,and pinhole resistance.
