Multilayer piezoelectric ceramic displacement actuators are susceptible to cracking in the region near the edge of the internal electrode, which may cause system damage or failure. In this paper, the stress ...Multilayer piezoelectric ceramic displacement actuators are susceptible to cracking in the region near the edge of the internal electrode, which may cause system damage or failure. In this paper, the stress distribution of a multilayer piezoelectric composite is investigated in a working environment and the optimized geometrical con?guration of the piezoelectric layer is obtained. The stress distribution in the structure and the stress concentration near the edge of the internal electrode, induced by non-uniform electric ?eld distribution, are analyzed by moir′e interferometry experiment and ?nite element numerical simulation. Based on the above analysis, two optimized geometrical models are presented for the purpose of geometrical con?guration selection, with which stress concentration can be reduced signi?cantly while the feasibility of the machining process and the basic structural functions occurring in the conventional model are retained. The numerical results indicate that the maximum stress in the optimized models is e?ectively diminished compared to the conventional model. For instance, the peak value of the principal stress in the optimized model II is 93.1% smaller than that in the conventional model. It is proved that stress concentration can be e?ectively relaxed in the latter of the two optimized models and thus the probability of fracture damage can be decreased.展开更多
PSN-PZN-PZT + x wt. %Cr2O3, X = 0.0-0-9, were prepared by conventional mixed oxide techniques at sintering temperatures of 1220 degrees C-1300 degrees C for 2 h. The effect of sintering temperature on the microstructu...PSN-PZN-PZT + x wt. %Cr2O3, X = 0.0-0-9, were prepared by conventional mixed oxide techniques at sintering temperatures of 1220 degrees C-1300 degrees C for 2 h. The effect of sintering temperature on the microstructure and the piezoelectric properties was investigated by XRD, SEM, and other conventional measurement. The result indicated that with temperature increasing, the valence of Cr ion from Cr5+ or Cr6+ changes into C3+, and the piezoelectric properties turn hard. With increasing Cr2O3 content, the amount of rhombohedral phases increases and the morphotropic boundary phase is correspondingly shifts to rhombohedral phase. A uniform microstructure and excellent comprehensive properties were obtained at 1240 degrees C as the amount of Cr2O3 is 0.5 wt.%.展开更多
基金Project supported by the National Natural Sciences Foundation of China (No.10232030).
文摘Multilayer piezoelectric ceramic displacement actuators are susceptible to cracking in the region near the edge of the internal electrode, which may cause system damage or failure. In this paper, the stress distribution of a multilayer piezoelectric composite is investigated in a working environment and the optimized geometrical con?guration of the piezoelectric layer is obtained. The stress distribution in the structure and the stress concentration near the edge of the internal electrode, induced by non-uniform electric ?eld distribution, are analyzed by moir′e interferometry experiment and ?nite element numerical simulation. Based on the above analysis, two optimized geometrical models are presented for the purpose of geometrical con?guration selection, with which stress concentration can be reduced signi?cantly while the feasibility of the machining process and the basic structural functions occurring in the conventional model are retained. The numerical results indicate that the maximum stress in the optimized models is e?ectively diminished compared to the conventional model. For instance, the peak value of the principal stress in the optimized model II is 93.1% smaller than that in the conventional model. It is proved that stress concentration can be e?ectively relaxed in the latter of the two optimized models and thus the probability of fracture damage can be decreased.
文摘PSN-PZN-PZT + x wt. %Cr2O3, X = 0.0-0-9, were prepared by conventional mixed oxide techniques at sintering temperatures of 1220 degrees C-1300 degrees C for 2 h. The effect of sintering temperature on the microstructure and the piezoelectric properties was investigated by XRD, SEM, and other conventional measurement. The result indicated that with temperature increasing, the valence of Cr ion from Cr5+ or Cr6+ changes into C3+, and the piezoelectric properties turn hard. With increasing Cr2O3 content, the amount of rhombohedral phases increases and the morphotropic boundary phase is correspondingly shifts to rhombohedral phase. A uniform microstructure and excellent comprehensive properties were obtained at 1240 degrees C as the amount of Cr2O3 is 0.5 wt.%.
