V-Shaped Monopole Antenna with Chichena Itzia Inspired Defected Ground Structure for UWB Applications

Due to rapid growth in wireless communication technology,higher bandwidth requirement for advance telecommunication systems,capable of operating on two or higher bands with higher channel capacities and minimum distortion losses is desired.In this paper,a compact Ultra-Wideband(UWB)V-shaped monopole antenna is presented.UWB response is achieved by modifying the ground plane with Chichen Itzia inspired rectangular staircase shape.The proposed V-shaped is designed by incorporating a rectangle,and an inverted isosceles triangle using FR4 substrate.The size of the antenna is 25 mm×26 mm×1.6 mm.The proposed V-shaped monopole antenna produces bandwidth response of 3 GHz Industrial,Scientific,and Medical(ISM),Worldwide Interoperability for Microwave Access(WiMAX),(IEEE 802.11/HIPERLAN band,5G sub 6 GHz)which with an additional square cut amplified the bandwidth response up to 8 GHz ranging from 3.1 GHz to 10.6 GHz attaining UWB defined by Federal Communications Commission(FCC)with a maximum gain of 3.83 dB.The antenna is designed in Ansys HFSS.Results for key performance parameters of the antenna are presented.The measured results are in good agreement with the simulated results.Due to flat gain,uniform group delay,omni directional radiation pattern characteristics and well-matched impedance,the proposed antenna is suitable for WiMAX,ISM and heterogeneous wireless systems.

Gain-Enhanced Metamaterial Based Antenna for 5G Communication Standards

Metamaterial surfaces play a vital role to achieve the surface waves suppression and in-phase reflection,in order to improve the antenna performance.In this paper,the performance comparison of a fifth generation(5G)antenna design is analyzed and compared with a metamaterial-based antenna for 5G communication system applications.Metamaterial surface is utilized as a reflector due to its in-phase reflection characteristic and high-impedance nature to improve the gain of an antenna.As conventional conducting ground plane does not give enough surface waves suppression which affects the antenna performance in terms of efficiency and gain etc.These factors are well considered in this work and improved by using the metamaterial surface.The radiating element of the proposed metamaterial based antenna is made up of copper material which is backed by the substrate,i.e.,Rogers-4003 with a standard thickness,loss tangent and a relative permittivity of 1.524 mm,0.0027 and 3.55,correspondingly.The proposed antenna with and without metamaterial surface operates at the central frequency of 3.32 GHz and 3.60 GHz,correspondingly.The traditional antenna yields a boresight gain of 2.76 dB which is further improved to 6.26 dB,using the metamaterial surface.The radiation efficiency of the proposed metamaterial-based 5G antenna is above 85%at the desired central frequency.

Design of a Compact Monopole Antenna for UWB Applications

In this paper,a low cost,highly efficient and low profile monopole antenna for ultra-wideband(UWB)applications is presented.A new inverted triangular-shape structure possessing meander lines is designed to achieve a wideband response and high efficiency.To design the proposed structure,three steps are utilized to achieve an UWB response.The bandwidth of the proposed antenna is improved with changing meander lines parameters,miniaturization of the ground width and optimization of the feeding line.The measured and simulated frequency band ranges from 3.2 to 12 GHz,while the radiation patterns are measured at 4,5.3,6 and 8 GHz frequency bands.The overall volume of the proposed antenna is 26×25×1.6 mm^(3);whereas the FR4 material is used as a substrate with a relative permittivity and loss tangent of 4.3 and 0.025,correspondingly.The peak gain of 4 dB is achieved with a radiation efficiency of 80 to 98%for the entire wideband.Design modelling of proposed antenna is performed in ANSYS HFSS 13 software.A decent consistency between the simulated and measured results is accomplished which shows that the proposed antenna is a potential candidate for the UWB applications.

Toward 6G Communication Networks:Terahertz Frequency Challenges and Open Research Issues

Future networks communication scenarios by the 2030s will include notable applications are three-dimensional(3D)calls,haptics communications,unmanned mobility,tele-operated driving,bio-internet of things,and the Nanointernet of things.Unlike the current scenario in which megahertz bandwidth are sufficient to drive the audio and video components of user applications,the future networks of the 2030s will require bandwidths in several gigahertzes(GHz)(from tens of gigahertz to 1 terahertz[THz])to perform optimally.Based on the current radio frequency allocation chart,it is not possible to obtain such a wide contiguous radio spectrum below 90 GHz(0.09 THz).Interestingly,these contiguous blocks of radio spectrum are readily available in the higher electromagnetic spectrum,specifically in the Terahertz(THz)frequency band.The major contribution of this study is discussing the substantial issues and key features of THz waves,which include(i)key features and significance of THz frequency;(ii)recent regulatory;(iii)the most promising applications;and(iv)possible open research issues.These research topics were deeply investigated with the aim of providing a specific,synopsis,and encompassing conclusion.Thus,this article will be as a catalyst towards exploring new frontiers for future networks of the 2030s.

Luminescence and low temperature trap centers in mixed rare earth borate crystal

The single crystal of this compound has been grown from melt by using a conventional Czochralski technique. The temperature dependent luminescence spectra were measured using a 265 nm laser as an exciting source in the range of 10-300 K. The scintillation decay time profile was measured and found to have three components. The influence of the trap centers on the luminescence properties was studied by means of thermoluminescence（TL） glow peak analysis. Low temperature TL glow peaks were measured in the temperature range of 10-300 K at the heating rate of 0.1 K/s for X-ray irradiated sample. The TL glow peak consists of two dominant peaks at 88 and 109 K. Several glow peaks with a complex nature causes the decrease in the light yield at temperatures below 250 K, and along with long scintillation decay components were observed. The trap parameters such as activation energy（E）, frequency factor（s）and order of kinetics（b） were calculated using various standard methods such as peak shape（PS）,variable heating rate（VHR）, initial rise（IR） and computerized glow curve deconvolution（CGCD）.