TIC-Tox: A preliminary discussion on identifying the forcing agents of DBP-mediated toxicity of disinfected water

The disinfection of drinking water is a major public health achievement; however, an unintended consequence of disinfection is the generation of disinfection by-products(DBPs). Many of the identified DBPs exhibit in vitro and in vivo toxicity, generate a diversity of adverse biological effects, and may be hazards to the public health and the environment.Only a few DBPs are regulated by several national and international agencies and it is not clear if these regulated DBPs are the forcing agents that drive the observed toxicity and their associated health effects. In this study, we combine analytical chemical and biological data to resolve the forcing agents associated with mammalian cell cytotoxicity of drinking water samples from three cities. These data suggest that the trihalomethanes(THMs) and haloacetic acids may be a small component of the overall cytotoxicity of the organic material isolated from disinfected drinking water. Chemical classes of nitrogen-containing DBPs, such as the haloacetonitriles and haloacetamides, appear to be the major forcing agents of toxicity in these samples. These findings may have important implications for the design of epidemiological studies that primarily rely on the levels of THMs to define DBP exposure among populations. The TIC-Tox approach constitutes a beginning step in the process of identifying the forcing agents of toxicity in disinfected water.

The impact of iodinated X-ray contrast agents on formation and toxicity of disinfection by-products in drinking water

The presence of iodinated X-ray contrast media(ICM) in source waters is of high concern to public health because of their potential to generate highly toxic disinfection by-products(DBPs). The objective of this study was to determine the impact of ICM in source waters and the type of disinfectant on the overall toxicity of DBP mixtures and to determine which ICM and reaction conditions give rise to toxic by-products. Source waters collected from Akron,OH were treated with five different ICMs, including iopamidol, iopromide, iohexol,diatrizoate and iomeprol, with or without chlorine or chloramine disinfection. The reaction product mixtures were concentrated with XAD resins and the mammalian cell cytotoxicity and genotoxicity of the reaction mixture concentrates was measured. Water containing iopamidol generated an enhanced level of mammalian cell cytotoxicity and genotoxicity after disinfection. While chlorine disinfection with iopamidol resulted in the highest cytotoxicity overall, the relative iopamidol-mediated increase in toxicity was greater when chloramine was used as the disinfectant compared with chlorine. Four other ICMs(iopromide, iohexol, diatrizoate, and iomeprol) expressed some cytotoxicity over the control without any disinfection, and induced higher cytotoxicity when chlorinated. Only iohexol enhanced genotoxicity compared to the chlorinated source water.

Showering in Flint, MI: Is there a DBP problem?

Lead contamination in the City of Flint, MI has been well documented over the past two years, with lead levels above the EPA Action Level until summer 2016. This resulted from an ill-fated decision to switch from Detroit water(Lake Huron) with corrosion control, to Flint River water without corrosion control. Although lead levels are now closer to normal,reports of skin rashes have sparked questions surrounding tap water in some Flint homes.This study investigated the presence of contaminants, including disinfection by-products(DBPs), in the hot tap water used for showering in the homes of residents in Flint. Extensive quantitative analysis of 61 regulated and priority unregulated DBPs was conducted in Flint hot and cold tap water, along with the analysis of 50 volatile organic compounds and a nontarget comprehensive, broadscreen analysis, to identify a possible source for the reported skin rashes. For comparison, chlorinated hot and cold waters from three other cities were also sampled, including Detroit, which also uses Lake Huron as its source water.Results showed that hot water samples generally contained elevated levels of regulated and priority unregulated DBPs compared to cold water samples, but trihalomethanes were still within regulatory limits. Overall, hot shower water from Flint was similar to waters sampled from the three other cities and did not have unusually high levels of DBPs or other organic chemicals that could be responsible for the skin rashes observed by residents. It is possible that an inorganic chemical or microbial contaminant may be responsible.

A new technique helps to uncover unknown peptides and disinfection by-products in water

Environmental water samples can be extremely complex,with potentially thousands of molecules that can derive from natural organic matter(NOM)and thousands that derive from anthropogenic contaminants.As complex as these samples are,drinking water can be even more complex.Due to disinfectants that are used to treat drinking water(e.g.,chlorine,chloramines,

Formation of iodo-trihalomethanes, iodo-haloacetic acids, and haloacetaldehydes during chlorination and chloramination of iodine containing waters in laboratory controlled reactions

Iodine containing disinfection by-products(I-DBPs) and haloacetaldehydes(HALs) are emerging disinfection by-product(DBP) classes of concern. The former due to its increased potential toxicity and the latter because it was found to be the third most relevant DBP class in mass in a U.S. nationwide drinking water study. These DBP classes have been scarcely investigated, and this work was performed to further explore their formation in drinking water under chlorination and chloramination scenarios. In order to do this, iodo-trihalomethanes(I-THMs),iodo-haloacetic acids(I-HAAs) and selected HALs(mono-HALs and di-HALs species, including iodoacetaldehyde) were investigated in DBP mixtures generated after chlorination and chloramination of different water matrices containing different levels of bromide and iodide in laboratory controlled reactions. Results confirmed the enhancement of I-DBP formation in the presence of monochloramine. While I-THMs and I-HAAs contributed almost equally to total I-DBP concentrations in chlorinated water, I-THMs contributed the most to total I-DBP levels in the case of chloraminated water. The most abundant and common I-THM species generated were bromochloroiodomethane, dichloroiodomethane, and chlorodiiodomethane. Iodoacetic acid and chloroiodoacetic acid contributed the most to the total I-HAA concentrations measured in the investigated disinfected water. As for the studied HALs, dihalogenated species were the compounds that predominantly formed under both investigated treatments.

Impact of chlorine exposure time on disinfection byproduct formation in the presence of iopamidol and natural organic matter during chloramination

Chloramines,in practice,are formed onsite by adding ammonia to chlorinated drinking water to achieve the required disinfection.While regulated disinfection byproducts(DBPs)are reduced during chloramine disinfection,other DBPs such as iodinated(iodo-)DBPs,that elicit greater toxicity are formed.The objective of this study was to investigate the impact of prechlorination time on the formation of both halogen-specific total organic halogen(TOX)and iodo/chlorinated(chloro-)DBPs during prechlorination/chloramination in source waters(SWs)containing iopamidol,an X-ray contrast medium.Barberton SW(BSW)and Cleveland SW(CSW)containing iopamidol were prechlorinated for 5–60 min and afterwards chloraminated for 72 hr with ammonium chloride.Chlorine contact time(CCT)did not significantly impact total organic iodine(TOI)concentrations after prechlorination or chloramination.Concentrations of total organic chlorine(TOCl)formed during prechlorination did not significantly change regardless of pH and prechlorination time,whileTOClappearedtodecreaseafter 72 hrchloraminationperiod.Dichloroiodomethane(CHCl_2I)formation during prechlorination did not exhibit any significant trends as a function of p H or CCT,but after chloramination,significant increases were observed at pHs 6.5 and 7.5 with respect to CCT.Iodo-HAAs were not formed during prechlorination but were detected after chloramination.Significant quantities of chloroform(CHCl_3)and trichloroacetic acid(TCAA)were formed during prechlorination but formation ceased upon ammonia addition.Therefore,prechlorination studies should measure TOX and DBP concentrations prior to ammonia addition to obtain data regarding the initial conditions.

Total organic halogen(TOX) in human urine: A halogen-specific method for human exposure studies

Disinfection by-products(DBPs) are a complex mixture of compounds unintentionally formed as a result of disinfection processes used to treat drinking water. Effects of long-term exposure to DBPs are mostly unknown and were the subject of recent epidemiological studies. However,most bioanalytical methods focus on a select few DBPs. In this study, a new comprehensive bioanalytical method has been developed that can quantify mixtures of organic halogenated compounds, including DBPs, in human urine as total organic chlorine(TOCl), total organic bromine(TOBr), and total organic iodine(TOI). The optimized method consists of urine dilution, adsorption to activated carbon, pyrolysis of activated carbon, absorption of gases in an aqueous solution, and halide analysis with ion chromatography and inductively coupled plasma-mass spectrometry. Spike recoveries for TOCl, TOBr, and TOI measurements ranged between 78% and 99%. Average TOCl, TOBr, and TOI concentrations in five urine samples from volunteers who consumed tap water were 1850, 82, and 21.0 μg/L as X^-, respectively.Volunteers who consumed spring water(control) had TOCl, TOBr, and TOI average concentrations in urine of 1090, 88, and 10.3 μg/L as X^-, respectively. TOCl and TOI in the urine samples from tap water consumers were higher than the control. However, TOBr was slightly lower in tap water urine samples compared to mineral water urine samples, indicating other sources of environmental exposure other than drinking water. A larger sample population that consumes tap water from different cities and mineral water is needed to determine TOCl, TOBr, and TOI exposure from drinking water.

Disinfection By-Products in Drinking Water, Recycled Water and Wastewater： Formation, Detection, Toxicity and Health Effects： Preface

The disinfection of drinking water was an outstanding(and perhaps the most important)public health achievement of the 20^(th) century.According to the United Nations World Health Organization,over 4 billion people have access

Disinfection byproducts and halogen-specific total organic halogen speciation in chlorinated source waters——The impact of iopamidol and bromide

This study investigated the speciation of halogen-specific total organic halogen and disinfection byproducts(DBPs) upon chlorination of natural organic matter(NOM) in the presence of iopamidol and bromide(Br^-).Experiments were conducted with low bromide source waters with different NOM characteristics from Northeast Ohio,USA and varied spiked levels of bromide(2-30 μmol/L) and iopamidol(1-5 μmol/L).Iopamidol was found to be a direct precursor to trihalomethane(THM) and haloacetic acid formation,and in the presence of Br^-favored brominated analogs.The concentration and speciation of DBPs formed were impacted by iopamidol and bromide concentrations,as well as the presence of NOM.As iopamidol increased the concentration of iodinated DBPs(iodo-DBPs) and THMs increased.However,as Br^-concentrations increased,the concentrations of nonbrominated iodo-and chloro-DBPs decreased while brominated-DBPs increased.Regardless of the concentration of either iopamidol or bromide,bromochloroiodomethane(CHBrClI) was the most predominant iodo-DBP formed except at the lowest bromide concentration studied.At relevant concentrations of iopamidol(1 μmol/L) and bromide(2 μmol/L),significant quantities of highly toxic iodinated and brominated DBPs were formed.However,the rapid oxidation and incorporation of bromide appear to inhibit iodoDBP formation under conditions relevant to drinking water treatment.

Relationships between regulated DBPs and emerging DBPs of health concern in U.S. drinking water

A survey was conducted at eight U.S. drinking water plants, that spanned a wide range of water qualities and treatment/disinfection practices. Plants that treated heavily-wastewaterimpacted source waters had lower trihalomethane to dihaloacetonitrile ratios due to the presence of more organic nitrogen and HAN precursors. As the bromide to total organic carbon ratio increased, there was more bromine incorporation into DBPs. This has been shown in other studies for THMs and selected emerging DBPs(HANs), whereas this study examined bromine incorporation for a wider group of emerging DBPs(haloacetaldehydes, halonitromethanes). Moreover, bromine incorporation into the emerging DBPs was, in general, similar to that of the THMs. Epidemiology studies that show an association between adverse health effects and brominated THMs may be due to the formation of brominated emerging DBPs of heath concern. Plants with higher free chlorine contact times before ammonia addition to form chloramines had less iodinated DBP formation in chloraminated distribution systems, where there was more oxidation of the iodide to iodate(a sink for the iodide) by the chlorine. This has been shown in many bench-scale studies(primarily for iodinated THMs), but seldom in full-scale studies(where this study also showed the impact on total organic iodine. Collectively, the THMs, haloacetic acids, and emerging DBPs accounted for a significant portion of the TOCl, TOBr, and TOI;however, ~50% of the TOCl and TOBr is still unknown. The correlation of the sum of detected DBPs with the TOCl and TOBr suggests that they can be used as reliable surrogates.

A balancing act: Optimizing free chlorine contact time to minimize iodo-DBPs, NDMA, and regulated DBPs in chloraminated drinking water

Many drinking water treatment plants in the U.S. have switched from chlorination to chloramination to lower levels of regulated trihalomethane(THM) and haloacetic acid(HAA) disinfection byproducts(DBPs) in drinking water and meet the current regulations. However, chloramination can also produce other highly toxic/carcinogenic, unregulated DBPs: iodoacids, iodo-THMs, and N-nitrosodimethylamine(NDMA). In practice, chloramines are generated by the addition of chlorine with ammonia, and plants use varying amounts of free chlorine contact time prior to ammonia addition to effectively kill pathogens and meet DBP regulations. However, iodo-DBPs and nitrosamines are generally not considered in this balancing of free chlorine contact time. The goal of our work was to determine whether an optimal free chlorine contact time could be established in which iodo-DBPs and NDMA could be minimized, while keeping regulated THMs and HAAs below their regulatory limits. The effect of free chlorine contact time was evaluated for the formation of six iodo-trihalomethanes(iodo-THMs), six iodo-acids, and NDMA during the chloramination of drinking water. Ten different free chlorine contact times were examined for two source waters with different dissolved organic carbon(DOC) and bromide/iodide. For the low DOC water at pH 7 and 8, an optimized free chlorine contact time of up to 1 h could control regulated THMs and HAAs, as well as iodo-DBPs and NDMA. For the high DOC water, a free chlorine contact time of 5 min could control iodo-DBPs and NDMA at both p Hs, but the regulated DBPs could exceed the regulations at pH 7.

Method to assess component contribution to toxicity of complex mixtures： Assessment of puberty acquisition in rats exposed to disinfection byproducts

A method based on regression modeling was developed to discern the contribution of component chemicals to the toxicity of highly complex, environmentally realistic mixtures of disinfection byproducts(DBPs). Chemical disinfection of drinking water forms DBP mixtures.Because of concerns about possible reproductive and developmental toxicity, a whole mixture(WM) of DBPs produced by chlorination of a water concentrate was administered as drinking water to Sprague–Dawley(S–D) rats in a multigenerational study. Age of puberty acquisition,i.e., preputial separation(PPS) and vaginal opening(VO), was examined in male and female offspring, respectively. When compared to controls, a slight, but statistically significant delay in puberty acquisition was observed in females but not in males. WM-induced differences in the age at puberty acquisition were compared to those reported in S–D rats administered either a defined mixture(DM) of nine regulated DBPs or individual DBPs. Regression models were developed using individual animal data on age at PPS or VO from the DM study. Puberty acquisition data reported in the WM and individual DBP studies were then compared with the DM models. The delay in puberty acquisition observed in the WM-treated female rats could not be distinguished from delays predicted by the DM regression model, suggesting that the nine regulated DBPs in the DM might account for much of the delay observed in the WM. This method is applicable to mixtures of other types of chemicals and other endpoints.

How well does XAD resin extraction recover halogenated disinfection byproducts for comprehensive identification and toxicity testing?

Halogenated disinfection byproducts(DBPs) are an unintended consequence of drinking water disinfection, and can have significant toxicity. XAD resins are commonly used to extract and enrich trace levels of DBPs for comprehensive, nontarget identification of DBPs and also for in vitro toxicity studies. However, XAD resin recoveries for complete classes of halogenated DBPs have not been evaluated, particularly for low, environmentally relevant levels(ng/L to low μg/L). Thus, it is not known whether levels of DBPs or the toxicity of drinking water might be underestimated. In this study, DAX-8/XAD-2 layered resins were evaluated, considering both adsorption and elution from the resins, for extracting 66 DBPs from water. Results demonstrate that among the 7 classes of DBPs investigated, trihalomethanes(THMs), including iodo-THMs, were the most efficiently adsorbed, with recovery of most THMs ranging from 50%-96%, followed by halonitromethanes(40%-90%). The adsorption ability of XAD resins for haloacetonitriles, haloacetamides, and haloacetaldehydes was highly dependent on the individual species. The adsorption capacity of XAD resins for haloacetic acids was lower(5%-48%), even after adjusting to p H 1 before extraction. Recovery efficiency for most DBPs was comparable with their adsorption, as most were eluted effectively from XAD resins by ethyl acetate. DBP polarity and molecular weight were the two most important factors that determine their recovery. Recovery of trichloromethane, iodoacetic acid, chloro-and iodo-acetonitrile, and chloroacetamide were among the lowest, which could lead to underestimation of toxicity, particularly for iodoacetic acid and iodo-acetonitrile, which are highly toxic.

Disinfection byproducts in chlorinated or brominated swimming pools and spas: Role of brominated DBPs and association with mutagenicity

Although the health benefits of swimming are well-documented, health effects such as asthma and bladder cancer are linked to disinfection by-products(DBPs) in pool water. DBPs are formed from the reaction of disinfectants such as chlorine(Cl) or bromine(Br) with organics in the water. Our previous study(Daiber et al., Environ. Sci. Technol. 50, 6652;2016) found correlations between the concentrations of classes of DBPs and the mutagenic potencies of waters from chlorinated or brominated swimming pools and spas. We extended this study by identifying significantly different concentrations of 21 individual DBPs in brominated or chlorinated pool and spa waters as well as identifying which DBPs and additional DBP classes were most associated with the mutagenicity of these waters. Using data from our previous study, we found that among 21 DBPs analyzed in 21 pool and spa waters, the concentration of bromoacetic acid was significantly higher in Brwaters versus Cl-waters, whereas the concentration of trichloroacetic acid was significantly higher in Cl-waters. Five Br-DBPs(tribromomethane, dibromochloroacetic acid, dibromoacetonitrile, bromoacetic acid, and tribromoacetic acid) had significantly higher concentrations in Br-spa versus Cl-spa waters. Cl-pools had significantly higher concentrations of ClDBPs(trichloroacetaldehyde, trichloromethane, dichloroacetic acid, and chloroacetic acid), whereas Br-pools had significantly higher concentrations of Br-DBPs(tribromomethane, dibromoacetic acid, dibromoacetonitrile, and tribromoacetic acid). The concentrations of the sum of all 4 trihalomethanes, all 11 Br-DBPs, and all 5 nitrogen-containing DBPs were each significantly higher in brominated than in chlorinated pools and spas. The 8 Br-DBPs were the only DBPs whose individual concentrations were significantly correlated with the mutagenic potencies of the pool and spa waters. These results, along with those from our earlier study, highlight the importance of Br-DBPs in the mutagenicity of these recreational waters.

Do DBPs swim in salt water pools? Comparison of 60 DBPs formed by electrochemically generated chlorine vs. conventional chlorine

Disinfectants are added to swimming pools to kill harmful pathogens. Although liquid chlorine(sodium hypochlorite) is the most commonly used disinfectant, alternative disinfection techniques like electrochemically generated mixed oxidants or electrochemically generated chlorine, often referred to as salt water pools, are growing in popularity. However, these disinfectants react with natural organic matter and anthropogenic contaminants introduced to the pool water by swimmers to form disinfection byproducts(DBPs). DBPs have been linked to several adverse health effects, such as bladder cancer, adverse birth outcomes, and asthma. In this study, we quantified 60 DBPs using gas chromatography-mass spectrometry and assessed the calculated cytotoxicity and genotoxicity of an indoor community swimming pool before and after switching to a salt water pool with electrochemically generated chlorine. Interestingly, the total DBPs increased by 15% upon implementation of the salt water pool, but the calculated cytotoxicity and genotoxicity decreased by 45% and 15%, respectively. Predominant DBP classes formed were haloacetic acids, with trichloroacetic acid and dichloroacetic acid contributing 57% of the average total DBPs formed. Haloacetonitriles, haloacetic acids, and haloacetaldehydes were the primary drivers of calculated cytotoxicity, and haloacetic acids were the primary driver of calculated genotoxicity. Diiodoacetic acid, a highly toxic iodinated DBP, is reported for the first time in swimming pool water. Bromide impurities in sodium chloride used to electrochemically generate chlorine led to a 73% increase in brominated DBPs, primarily driven by bromochloroacetic acid. This study presents the most extensive DBP study to-date for salt water pools.

A catalyst for integrating analytical biology,analytical chemistry, and engineering to improve drinking water safety: The groundbreaking work of Dr. Michael Plewa

It is interesting how a random encounter can profoundly change your life. My random encounter was with a young graduate student from Michael Plewa’s laboratory. The location was the 1999 American Chemical Society (ACS) Conference, where, following his talk, this promising researcher was being unfairly criticized by a well-established scientist. I disagreed with this scientist’s criticism, and I encouraged the student how I thought his work was important.