Formation potential and analysis of 32 regulated and unregulated disinfection by-products: Two new simplified methods

Water disinfection is an essential process that provides safe water by inactivating pathogens that cause waterborne diseases. However, disinfectants react with organic matter naturally present in water, leading to the formation of disinfection by-products(DBPs). Multi-analyte methods based on mass spectrometry(MS) are preferred to quantify multiple DBP classes at once however, most require extensive sample pre-treatment and significant resources. In this study, two analytical methods were developed for the quantification of 32 regulated and unregulated DBPs. A purge and trap(P&T) coupled with gas chromatography mass spectrometry(GC-MS) method was optimized that automated sample pre-treatment and analyzed volatile and semi-volatile compounds, including trihalomethanes(THMs), iodinated trihalomethanes(I-THMs), haloacetonitriles(HANs), haloketones(HKTs) and halonitromethanes(HNMs). LOQs were between 0.02-0.4 μg/L for most DBPs except for 8 analytes that were in the low μg/L range. A second method with liquid chromatography(LC) tandem mass spectrometry(MS/MS) was developed for the quantification of 10 haloacetic acids(HAAs) with a simple clean-up and direct injection. The LC-MS/MS direct injection method has the lowest detection limits reported(0.2-0.5 μg/L). Both methods have a simple sample pre-treatment, which make it possible for routine analysis. Hyperchlorination and uniform formation conditions(UFC) formation potential tests with chlorine were evaluated with water samples containing high and low TOC. Hyperchlorination formation potential test maximized THMs and HAAs while UFC maximized HANs. Ascorbic acid was found to be an appropriate quencher for both analytical methods. Disinfected drinking water from four water utilities in Alberta, Canada were also evaluated.

Showering in Flint, MI: Is there a DBP problem?

Lead contamination in the City of Flint, MI has been well documented over the past two years, with lead levels above the EPA Action Level until summer 2016. This resulted from an ill-fated decision to switch from Detroit water（Lake Huron） with corrosion control, to Flint River water without corrosion control. Although lead levels are now closer to normal,reports of skin rashes have sparked questions surrounding tap water in some Flint homes.This study investigated the presence of contaminants, including disinfection by-products（DBPs）, in the hot tap water used for showering in the homes of residents in Flint. Extensive quantitative analysis of 61 regulated and priority unregulated DBPs was conducted in Flint hot and cold tap water, along with the analysis of 50 volatile organic compounds and a nontarget comprehensive, broadscreen analysis, to identify a possible source for the reported skin rashes. For comparison, chlorinated hot and cold waters from three other cities were also sampled, including Detroit, which also uses Lake Huron as its source water.Results showed that hot water samples generally contained elevated levels of regulated and priority unregulated DBPs compared to cold water samples, but trihalomethanes were still within regulatory limits. Overall, hot shower water from Flint was similar to waters sampled from the three other cities and did not have unusually high levels of DBPs or other organic chemicals that could be responsible for the skin rashes observed by residents. It is possible that an inorganic chemical or microbial contaminant may be responsible.

Total organic halogen(TOX) in human urine: A halogen-specific method for human exposure studies

Disinfection by-products（DBPs） are a complex mixture of compounds unintentionally formed as a result of disinfection processes used to treat drinking water. Effects of long-term exposure to DBPs are mostly unknown and were the subject of recent epidemiological studies. However,most bioanalytical methods focus on a select few DBPs. In this study, a new comprehensive bioanalytical method has been developed that can quantify mixtures of organic halogenated compounds, including DBPs, in human urine as total organic chlorine（TOCl）, total organic bromine（TOBr）, and total organic iodine（TOI）. The optimized method consists of urine dilution, adsorption to activated carbon, pyrolysis of activated carbon, absorption of gases in an aqueous solution, and halide analysis with ion chromatography and inductively coupled plasma-mass spectrometry. Spike recoveries for TOCl, TOBr, and TOI measurements ranged between 78% and 99%. Average TOCl, TOBr, and TOI concentrations in five urine samples from volunteers who consumed tap water were 1850, 82, and 21.0 μg/L as X^-, respectively.Volunteers who consumed spring water（control） had TOCl, TOBr, and TOI average concentrations in urine of 1090, 88, and 10.3 μg/L as X^-, respectively. TOCl and TOI in the urine samples from tap water consumers were higher than the control. However, TOBr was slightly lower in tap water urine samples compared to mineral water urine samples, indicating other sources of environmental exposure other than drinking water. A larger sample population that consumes tap water from different cities and mineral water is needed to determine TOCl, TOBr, and TOI exposure from drinking water.