The corrosion behavior of an Al-6Mg-Sc-Zr alloy was studied and compared with that of an Al-6Mg-Zr alloy.The addition of scandium into the Al-6Mg-Zr alloy reduced the susceptibility to exfoliation corrosion. By using ...The corrosion behavior of an Al-6Mg-Sc-Zr alloy was studied and compared with that of an Al-6Mg-Zr alloy.The addition of scandium into the Al-6Mg-Zr alloy reduced the susceptibility to exfoliation corrosion. By using the constantload tensile method in a 3.5 wt.% NaCl solution, the resistance to SCC of the Al-6Mg-Sc-Zr alloy was higher than that ofthe Al-6Mg-Zr alloy. When the specimens were not applied with an anodic current, the Al-6Mg-Sc-Zr alloy was resistanceto SCC and no brittle cracking was found on the fracture surface. When an anodic current was applied, the Al-6Mg-Sc-Zralloy specimens failed as a result of accelerated corrosion rather than SCC. It was believed that the addition of scandium re-sulted in (Al3Sc, Zr) particles that greatly refined grains and promoted the formation of homogeneous discontinuous distri-bution of β-phase in the alloy base, which much contributed to good corrosion resistance of the Al-6Mg-Sc-Zr alloy.展开更多
文摘The corrosion behavior of an Al-6Mg-Sc-Zr alloy was studied and compared with that of an Al-6Mg-Zr alloy.The addition of scandium into the Al-6Mg-Zr alloy reduced the susceptibility to exfoliation corrosion. By using the constantload tensile method in a 3.5 wt.% NaCl solution, the resistance to SCC of the Al-6Mg-Sc-Zr alloy was higher than that ofthe Al-6Mg-Zr alloy. When the specimens were not applied with an anodic current, the Al-6Mg-Sc-Zr alloy was resistanceto SCC and no brittle cracking was found on the fracture surface. When an anodic current was applied, the Al-6Mg-Sc-Zralloy specimens failed as a result of accelerated corrosion rather than SCC. It was believed that the addition of scandium re-sulted in (Al3Sc, Zr) particles that greatly refined grains and promoted the formation of homogeneous discontinuous distri-bution of β-phase in the alloy base, which much contributed to good corrosion resistance of the Al-6Mg-Sc-Zr alloy.