Straight-blade Darrieus vertical axis wind turbines are used as medium and small size wind turbine because of higher power output in vertical axis wind turbine (VAWT). In our previous study, the relationship between t...Straight-blade Darrieus vertical axis wind turbines are used as medium and small size wind turbine because of higher power output in vertical axis wind turbine (VAWT). In our previous study, the relationship between the performance and Reynolds number based on airfoil chord length had been investigated by using small-scale test models of lift-type VAWT, and the results showed that the performance of tested wind turbine models with small diameter was clearly lower than that of the large-scale field test machine, and its performance also varies significantly with the blade pitch angle. In this study, we focused on the performance of a small-scale straight-blade Darrieus VAWT, the relationship among the blade airfoil camber direction and the pitch angle, and the performance of the small-scale VAWT was examined experimentally by using a small-scale VAWT test model with Gurney flap which was a small flat plate. Gurney flaps with its height h, as a ratio to the blade chord length c, <em>h/c</em> = 0.036 to 0.055, were attached to the blades of the VAWT test model, in addition, the attaching direction of the Gurney flap on the blade was examined for both inward and outward of the rotor, and the pitch angle was also examined for a range of <span style="white-space:nowrap;">−</span>5 to 10 degrees. These results are discussed comparing with the result of the VAWT without Gurney flap and considering the numerical results for the single blade with/without the Gurney flap. The results showed that the performance of the tested VAWT was reversed between the inward and outward Gurney flaps around a pitch angle of 10 degrees. That is, the inward Gurney flap was superior at a pitch angle of less than 10 degrees, while the outward Gurney flap was effective at a pitch angle of more than 10 degrees. Furthermore, for the tested small-scale VAWT model, the optimum pitch angle was about 5 degrees, and the inward and shorter Gurney flap showed higher power performance of the VAWT under this pitch angle condition.展开更多
A cross-flow wind turbine near a structure was tested for the performance. The results showed that the performance of a cross-flow wind turbine near a structure was up to 30% higher than the one without a structure. I...A cross-flow wind turbine near a structure was tested for the performance. The results showed that the performance of a cross-flow wind turbine near a structure was up to 30% higher than the one without a structure. In addition, we tried to get higher performance of a cross-flow wind turbine by using an Inlet Guide Structure and a Flow Deflector. An Inlet Guide Structure was placed on the edge of a structure and a Flow Deflector was set near a cross-flow wind turbine and can improve ambient wind environments of the wind turbine, the maximum power coefficients were about 15 to 40% higher and the tip speed ratio range showing the high power coefficient was wide and the positive gradients were steep apparently.展开更多
文摘Straight-blade Darrieus vertical axis wind turbines are used as medium and small size wind turbine because of higher power output in vertical axis wind turbine (VAWT). In our previous study, the relationship between the performance and Reynolds number based on airfoil chord length had been investigated by using small-scale test models of lift-type VAWT, and the results showed that the performance of tested wind turbine models with small diameter was clearly lower than that of the large-scale field test machine, and its performance also varies significantly with the blade pitch angle. In this study, we focused on the performance of a small-scale straight-blade Darrieus VAWT, the relationship among the blade airfoil camber direction and the pitch angle, and the performance of the small-scale VAWT was examined experimentally by using a small-scale VAWT test model with Gurney flap which was a small flat plate. Gurney flaps with its height h, as a ratio to the blade chord length c, <em>h/c</em> = 0.036 to 0.055, were attached to the blades of the VAWT test model, in addition, the attaching direction of the Gurney flap on the blade was examined for both inward and outward of the rotor, and the pitch angle was also examined for a range of <span style="white-space:nowrap;">−</span>5 to 10 degrees. These results are discussed comparing with the result of the VAWT without Gurney flap and considering the numerical results for the single blade with/without the Gurney flap. The results showed that the performance of the tested VAWT was reversed between the inward and outward Gurney flaps around a pitch angle of 10 degrees. That is, the inward Gurney flap was superior at a pitch angle of less than 10 degrees, while the outward Gurney flap was effective at a pitch angle of more than 10 degrees. Furthermore, for the tested small-scale VAWT model, the optimum pitch angle was about 5 degrees, and the inward and shorter Gurney flap showed higher power performance of the VAWT under this pitch angle condition.
文摘A cross-flow wind turbine near a structure was tested for the performance. The results showed that the performance of a cross-flow wind turbine near a structure was up to 30% higher than the one without a structure. In addition, we tried to get higher performance of a cross-flow wind turbine by using an Inlet Guide Structure and a Flow Deflector. An Inlet Guide Structure was placed on the edge of a structure and a Flow Deflector was set near a cross-flow wind turbine and can improve ambient wind environments of the wind turbine, the maximum power coefficients were about 15 to 40% higher and the tip speed ratio range showing the high power coefficient was wide and the positive gradients were steep apparently.
